Domnev: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
 
(325 intermediate revisions by the same user not shown)
Line 1: Line 1:
<p style="color:red">The information on this page is updated in accordance with the [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.08'''] firmware version .</p>
__TOC__
==Summary==
==Summary==
This article contains instructions on how to send M-Bus data to the server using various protocols.


This chapter is a guide on configuring cobot.me provider '''hotspot''' instance on RUTX routers.
==Configuration overview & prerequisites==
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.


'''Prerequisites''':
* TRB143;
* M-Bus device;
* Server;
* An end device (PC, Laptop, Tablet, Smartphone) for configuration;


If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
| series = RUTX
}}


[[File:Networking_{{{series}}}_manual_webui_basic_advanced_mode.gif|border|class=tlt-border]]
==Adding M-Bus devices==
The '''[[TRB143_M-Bus|M-Bus Settings]]''' section is used to configure the general service functionality. To set up a new M-Bus instance, go to '''Services → M-Bus → Client'''. Add a new device to the configuration press [[File:Add Button.png|60x90px]] button which is shown below.


==Step 1: cobot.me configuration ==
[[File:Mbus adding new device.png||border|class=tlt-border]]
===Login===
 
===Device configuration===
----
----
First, go to '''cobot.me''' and log into your account ('''LOG IN''' in the top right corner). If you don't have a registered account then you need to create one - click '''Start Your Free Trial'''.
You will be granted to a new window. Configure your M-Bus device accordingly:
[[File:Cobotlogin.png|border|center]]
 
# '''Name''': Enter the desired name of the M-Bus device
# '''Address type''': select which M-Bus address will be used
# '''Primary/Secondary address''': specify M-Bus address
 
[[File:Mbus adding new device configuration v3.png|border|class=tlt-border]]


====Sign Up====
Test if the M-Bus device is reachable by a specified primary/secondary address. To do so click on [[File:Ping_device_option_mbus.png|110x110px]]. You might get on of two outputs:


After clicking '''Start Your Free Trial''' you will be redirected to register page. Enter you account information and click '''Next'''.
* If you have specified correct primary/secondary address, you will receive:
[[File:Signupfree.png|border|center]]
[[File:Mbus device pingable v2.png|border|class=tlt-border|300px]]
Next step is to enter further information of your account. After entering it click '''Add Space'''.
[[File:Register2Cobot.png|alt=|border|center]]


* If you have specified incorrect primary/secondary address, you will receive (if you do not know what address should be used, refer to the Scanning for available M-Bus devices (PRIDET URL) secion:
[[File:Mbus device not pingable v2.png|border|class=tlt-border|300px]]


Once finished, save the configuration by clicking [[File:Savenapply button.png|Savenapply button.png]].


===Set Up new radius server===
===Scanning for available M-Bus devices===
----
----
In the opened window click '''SETUP''' icon, then - '''Wifi Integration'''. You will be prompted to '''Radius Wifi Integration''' window. Click the '''Set up Radius Server.'''
[[File:Imagea.png|border|center]]


===Network details===
If you are not sure what address your M-Bus devices have, you can try scanning for the available M-Bus devices. To do so click on [[File:Scan button.png]] button.


You will be given your Radius server configuration data that you will need in the next step.
====Scan settings====
[[File:Imageg.png|border|center]]
----
You will be granted to a new window. Configure scan settings accordingly:


===Add Wifi Guest Accounts===
# '''Scan type''': select which M-Bus address will be scanned
# '''Scan range''': From what M-Bus address scanning will start and M-Bus address until scanning will be performed.
[[File:Mbus scan.png|border|class=tlt-border]]


Click '''Wifi Guest Accounts''' in the bottom of the page to add accounts to let users access your wifi.
To start the scan click on [[File:Start scan button.png]] button.
[[File:Imagef.png|border|center]]


Type user account information and click '''Add Account'''.
====Found devices====
[[File:Addusers.png|border|center]]
----
Once the scan is finished you should see the list of M-Bus devices that TRB143 were able to find:


At the bottom of the page you can see all your created users.
[[File:Mbus scanned devices add.png|border|class=tlt-border]]
[[File:Accounts.png|border|center]]


==Step 2: Router configuration ==
You can either [[File:Pencil2.png]] '''(1)''' M-Bus devices primary address or [[File:Add Button.png|60x90px]] '''(2)''' to the M-Bus devices list.


===Log in===
==Gathering M-Bus data==


Open your RUT9XX homepage. That can be done by entering 192.168.1.1 in your internet browser's URL bar and log in with your credentials - the default credentials are '''admin''' as Username and '''admin01''' as Password (the address can different - depending if you changed it or not).
If the device successfully added to the list, under the General settings you should see that the Status changes to <span style="color:green">Active</span>.


===Set up wireless===
[[File:Mbus status active v2.png|border|class=tlt-border]]


If you have already set up your wireless access point - skip this step.
===Data collecting groups===
----
To reach data collecting groups configuration press [[File:Pencil2.png]] button. [[File:Add Button.png|60x90px]] button lets you to create a new instance.


Open the wireless configuration panel by clicking '''Network → Wireless'''
[[File:Mbus data collect overview.png|border|class=tlt-border]]


[[File:ClickWireless.png]]
====Data collecting group instance====
----


Click '''Add'''
Each data collection group contains the following information. Configure device accordingly:


[[File:ClickAddWireless.png]]
# '''Enabled''': on
# '''Name''': desired name of the instance
# '''Period''': desired time duration between data retrievals
# '''Data type''': desired data type to process the received data. Depending on your needs you can select between 5 different data types: '''JSON, XML, ASCII, Hexadecimal''' and '''Binary'''.


Check the '''Enable wireless''' checkbox, enter router's '''SSID''' and for the safety purpose click '''Wireless Security'''.
[[File:Mbus data collect group v2.png|border|class=tlt-border]]


[[File:SetUp1Wireless.png]]
You can check if your configuration works accordingly by pressing the [[File:Mbus test button.png]] button. You should see the data in a pop-up field:


Choose your '''Encryption''', enter the '''Key''' and click '''Save'''.
[[File:Mbus TEST output.png|border|class=tlt-border]]


[[File:SetUp2Wireless.png]]
====Group values====
----
To reach group values configuration press [[File:Pencil2.png]] button:


===Set up hotspot===
[[File:Mbus edit group values.png|border|class=tlt-border]]


Open the hotspot configuration panel by clicking '''Services → Hotspot'''
There you can adjust additional settings:


[[File:ClickHotspot.png]]
# '''Enable''': Enable/disable data group value.
# '''FCB toggle''': FCB (Frame Count-Bit), one-bit counter for reliable server-client communication.
# '''Manufacturer information''': Select to include manufacturer information in the payload.
# '''Selected parameters''': Select to include the all parameters saved from device, or a custom subset of them. If the custom is selected you can specify '''frame''', '''record''' numbers and also a '''paramater'''


Click '''Edit'''
[[File:Mbus device groupsa.png|border|class=tlt-border]]


[[File:ClickHotspotEdit.png]]


Use configuration details from '''Step 1'''.
==Sending data to the server==
The '''[[TRB143_Data_to_Server|Data to Server]]''' feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers. This section will walk you through configuring the Data to Server to send M-Bus data to the desired HTTP or MQTT server.


Check '''enable''' box
===Data to Server configuration===
----
To set up Data to Server, navigate to Services → Data to Server. Enter desired name of the instnace and hit [[File:Add Button.png|60x90px]] button which is shown below.


Select '''External radius''' from '''Authentication mode''' dropbox
[[File:Mbus data to server create.png|border|class=tlt-border]]


Select '''PAP''' from '''Authentication protocol''' dropbox
===Data configuration===
----


Type configuration details '''RADIUS Server''', '''Authentication port''', '''Accounting port''' and '''Radius secret key'''
Each data collection group contains the following information. Configure device accordingly:


And click '''Save'''
# '''Name''': desired name of the instance
# '''Type''': M-Bus data
# '''Format''': custom or JSON depending on a need.


[[File:HotspotSettings.png]]
[[File:Mbus data to server configuration.png|border|class=tlt-border]]


==Test your Hotspot==


Try connecting to your router using computer or mobile phone.
Once finished configuring Data configuration tab click on [[File:Mbus data to server collection edit.png|160x160px]] button.


Select your router.
===Collection configuration===
----


[[File:FindRouters.png|400px]]
[[File:Mbus data to server collection configuration.png|border|class=tlt-border]]


After successful connection visit any website. You should be redirected to hotspot login page.
Once finished configuring Collection configuration tab click on [[File:Mbus data to server server button.png|160x160px]] button.


Type your username and password.
===Server configuration===
----
This section contains information on how to configure MQTT and HTTP servers information.
 
====HTTP configuration====
----
 
# '''Type''': HTTP
# '''Server address''': desired server address
 
'''Note''': not specified fields are optional.
 
[[File:Mbus data to server HTTP configuration.png|border|class=tlt-border]]


Click '''Login'''
====MQTT configuration====
----


[[File:LoginToYourRouter.png|400px]]
# '''Type''': MQTT
# '''Server address''': desired server address
# '''Topic''': MQTT topic to be used for publishing the data.


You should see a message '''Authorization Successful'''
'''Note''': not specified fields are optional.


[[File:HotspotSuccesss.png|400px]]
[[File:Mbus data to server MQTT configuration.png|border|class=tlt-border]]
 
Once finished configuring Server configuration tab click on [[File:Savenapply button.png|Savenapply button.png]] button.
 
===Results===
----


==External links==
[[File:Mbus data received v2.png|border|class=tlt-border]]
http://www.cobot.me


[[Category:IoT]]
'''Note''': received data formating depends on the settings you apply under Data to Server and M-Bus configurations.

Latest revision as of 07:20, 25 October 2024

The information on this page is updated in accordance with the 00.07.08 firmware version .

Summary

This article contains instructions on how to send M-Bus data to the server using various protocols.

Configuration overview & prerequisites

Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.

Prerequisites:

  • TRB143;
  • M-Bus device;
  • Server;
  • An end device (PC, Laptop, Tablet, Smartphone) for configuration;

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Adding M-Bus devices

The M-Bus Settings section is used to configure the general service functionality. To set up a new M-Bus instance, go to Services → M-Bus → Client. Add a new device to the configuration press button which is shown below.

Device configuration

You will be granted to a new window. Configure your M-Bus device accordingly:

  1. Name: Enter the desired name of the M-Bus device
  2. Address type: select which M-Bus address will be used
  3. Primary/Secondary address: specify M-Bus address

Test if the M-Bus device is reachable by a specified primary/secondary address. To do so click on . You might get on of two outputs:

  • If you have specified correct primary/secondary address, you will receive:

  • If you have specified incorrect primary/secondary address, you will receive (if you do not know what address should be used, refer to the Scanning for available M-Bus devices (PRIDET URL) secion:

Once finished, save the configuration by clicking Savenapply button.png.

Scanning for available M-Bus devices

If you are not sure what address your M-Bus devices have, you can try scanning for the available M-Bus devices. To do so click on button.

Scan settings

You will be granted to a new window. Configure scan settings accordingly:

  1. Scan type: select which M-Bus address will be scanned
  2. Scan range: From what M-Bus address scanning will start and M-Bus address until scanning will be performed.

To start the scan click on button.

Found devices

Once the scan is finished you should see the list of M-Bus devices that TRB143 were able to find:

You can either (1) M-Bus devices primary address or (2) to the M-Bus devices list.

Gathering M-Bus data

If the device successfully added to the list, under the General settings you should see that the Status changes to Active.

Data collecting groups

To reach data collecting groups configuration press button. button lets you to create a new instance.

Data collecting group instance

Each data collection group contains the following information. Configure device accordingly:

  1. Enabled: on
  2. Name: desired name of the instance
  3. Period: desired time duration between data retrievals
  4. Data type: desired data type to process the received data. Depending on your needs you can select between 5 different data types: JSON, XML, ASCII, Hexadecimal and Binary.

You can check if your configuration works accordingly by pressing the button. You should see the data in a pop-up field:

Group values

To reach group values configuration press button:

There you can adjust additional settings:

  1. Enable: Enable/disable data group value.
  2. FCB toggle: FCB (Frame Count-Bit), one-bit counter for reliable server-client communication.
  3. Manufacturer information: Select to include manufacturer information in the payload.
  4. Selected parameters: Select to include the all parameters saved from device, or a custom subset of them. If the custom is selected you can specify frame, record numbers and also a paramater


Sending data to the server

The Data to Server feature provides you with the possibility to set up data senders that collect data from various sources and periodically send it to remote servers. This section will walk you through configuring the Data to Server to send M-Bus data to the desired HTTP or MQTT server.

Data to Server configuration

To set up Data to Server, navigate to Services → Data to Server. Enter desired name of the instnace and hit button which is shown below.

Data configuration

Each data collection group contains the following information. Configure device accordingly:

  1. Name: desired name of the instance
  2. Type: M-Bus data
  3. Format: custom or JSON depending on a need.


Once finished configuring Data configuration tab click on button.

Collection configuration

Once finished configuring Collection configuration tab click on button.

Server configuration

This section contains information on how to configure MQTT and HTTP servers information.

HTTP configuration

  1. Type: HTTP
  2. Server address: desired server address

Note: not specified fields are optional.

MQTT configuration

  1. Type: MQTT
  2. Server address: desired server address
  3. Topic: MQTT topic to be used for publishing the data.

Note: not specified fields are optional.

Once finished configuring Server configuration tab click on Savenapply button.png button.

Results

Note: received data formating depends on the settings you apply under Data to Server and M-Bus configurations.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Domnev&oldid=134858"