Jump to content
  • EN

Ironwifi.com Hotspot Configuration on RutOS firmware: Difference between revisions

← Older edit
VisualWikitext
No edit summary
 
(9 intermediate revisions by 2 users not shown)
Line 2: Line 2:


This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices.
This chapter is a guide on configuring ironwifi.com provider '''hotspot''' instance on RUTX routers. This setup is also applicable to RUT series devices.
==Step 1: cobot.me configuration ==
==Step 1: ironwifi.com configuration ==
===Login===
===Login===
----
----
First, go to '''console.ironwifi.com/login''' and log into your account. If you don't have a registered account then you will need to create one - click '''Open Account.'''
First, go to '''console.ironwifi.com/login''' and log into your account. If you don't have a registered account then you will need to create one - click '''Open Account.'''
[[File:Ironwifilogin2.png|border|center]]
[[File:Ironwifilogin2.png|border|center|class=tlt-border]]
====Sign Up====
====Sign Up====
 
----
After clicking '''Open Account''' you will be redirected to register page. Enter you account information and click '''Submit'''. To complete registration go to your email inbox.
After clicking '''Open Account''' you will be redirected to register page. Enter you account information and click '''Submit'''. To complete registration go to your email inbox.
 
[[File:IronWiFi create acc.png|border|center|class=tlt-border|550×499px]]
[[File:Ironregister56.png|border|center]]
 
 
 


===Set Up new radius server===
===Set Up new radius server===
----
----
In the opened window click '''Networks.'''
In the opened window click '''Networks.'''
[[File:Ironuser5.png|border|center|1220x1220px]]
[[File:Ironuser.png|border|center|class=tlt-border|800x800px]]
 


Then - '''New Network''' and you will be prompted to create a new network.
Then - '''New Network''' and you will be prompted to create a new network.
[[File:Ironguest6.png|border|center|1306x1306px]]
[[File:Ironwifi newnetwork.png|border|center|class=tlt-border|931×292px|800x800px]]
Enter your desired network name can click '''Create'''.
Enter your desired network name can click '''Create'''.
[[File:Ironradius1.png|border|center]]
[[File:Ironradius1.png|border|center|class=tlt-border]]
===Network details===
===Network details===
 
----
Click on your '''created network.'''
Click on your '''created network.'''
[[File:Irondata1.png|border|center|1142x1142px]]
[[File:IronWiFi created networkV2.png|border|center|class=tlt-border|664x664px]]
You will be taken to a window where all detailed Radius server information will be displayed.
You will be taken to a window where all detailed Radius server information will be displayed.
[[File:Ironnetwork details.png|border|center|1152x1152px]]
[[File:IronWiFi network detailsV2.png|border|center|class=tlt-border|800x800px]]
===Add Wifi Guest Accounts===
===Add Wifi Guest Accounts===
 
----
Open '''Users''' tab and create N'''ew User''' for your WiFi.
Open the '''Users''' tab and press the '''New''' '''User''' to create a new user for your WiFi.
[[File:Ironguest.png|border|center|1388x1388px]]
[[File:IronWiFi add guest.png|border|center|class=tlt-border|800x800px]]
Type '''Username''' and click '''Create User.'''
Type '''Username''' and click '''Create User.'''
[[File:Iron guest1.png|border|center]]
[[File:Iron guest1.png|border|center|class=tlt-border]]
Click on your user.
Click on your user.
[[File:Irongust6.png|border|center]]
[[File:Irongust6.png|border|center|class=tlt-border]]
To set a password click on the '''Password.'''
To set a password click on the '''Password.'''
[[File:Ironpassowrd.png|border|center|776x776px]]
[[File:Ironpassowrd.png|border|center|class=tlt-border|800x800px]]
 


All created users are displayed under '''Users''' tab.
[[File:IronWiFi created users.png|border|center|class=tlt-border|800x800px]]


All created users is displayed under '''Users''' tab.
[[File:Ironguestg.png|border|center|1266x1266px]]
==Step 2: Router configuration ==
==Step 2: Router configuration ==
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should '''turn on "Advanced WebUI" mode'''. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
[[File:Networking rutx manual webui basic advanced mode.gif|border|center]]
===Creating wireless access point===
===Creating wireless access point===
 
----
If you have already set up your wireless access point - skip this step.
If you have already set up your wireless access point - skip this step.


* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
* Go to the '''Network → Wireless''' page.
* Go to the '''Network → Wireless''' page.
* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.
* '''Click 'Add'''' to create a new Wireless Access Point.


[[File:Wifirut.png|border|center]]
[[File:WiFi interfacesV2.png|border|center|class=tlt-border|1101x1101px]]


Edit your new Access Point as below:
Edit your new Access Point as below:
<table class="nd-othertables_2">
    <tr>
        <th width=440; style="border-bottom: 1px solid white;></th>
        <th width=800; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Cobot WiFi interfaceV2.png|border|center|class=tlt-border|805x373px]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 4px solid white>
# Check '''Enable''';
# Radios - Select desired radio;
# SSID - Your desired Extended Service Set Identifier name;
# Network - Choose '''--No network--'''.
        </td>
    </tr>
</table>


# Check '''Enable;'''
Navigate to '''Wireless Security''' tab and choose your  
# Mode - '''Access Point''';
# Encryption - '''No encryption'''.
# ESSID - Your desired Extended Service Set Identifier name;
[[File:Cobot WiFi interface securityV2.png|border|center|class=tlt-border|799x799px]]
# Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
[[File:APconfig1.png|border|center]]
 
Navigate to '''Wireless Security''' tab and choose your '''Encryption''' method '''(1)'''. When you are done, click '''Save & Apply (2)'''.
 
[[File:APsecu.png|border|center]]
===Set up hotspot===
===Set up hotspot===
 
----
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.


[[File:Hotspota.png|border|center]]
[[File:Add hotspotV2.png|border|center|class=tlt-border|1100x1100px]]


'''Hotspot configuration'''
'''Hotspot configuration'''


In the '''General tab''' do the following steps:
In the '''General tab,''' do the following steps:


# Check '''Enable;'''
<table class="nd-othertables_2">
# Authentication mode - '''Radius'''.
    <tr>
[[File:Hotspotgentab.png|border|center]]
        <th width=440; style="border-bottom: 1px solid white;></th>
        <th width=800; style="border-bottom: 1px solid white;" rowspan=2>
[[File:Hotspot configV2.png|border|center|class=tlt-border|827x445px]]</th>
    </tr>
    <tr>
        <td style="border-bottom: 4px solid white>
# Authentication mode - '''Radius''';
# Check '''Enable'''.
        </td>
    </tr>
</table>


 
Then go to the '''Radius''' tab and enter the Radius server configuration details from ironwifi:
Then go to '''Radius''' tab and enter the Radius server configuration details from cobot:
<table class="nd-othertables_2">
 
    <tr>
# '''RADIUS Servers''' - 35.189.111.2, 35.189.127.125;
        <th width=440; style="border-bottom: 1px solid white;></th>
# '''Authentication port''' - 22035;
        <th width=800; style="border-bottom: 1px solid white;" rowspan=2>
# '''Accounting port''' - 22036;
[[File:IrohotspotV3.png|border|center|751x751px]]</th>
# '''NAS Identifie'''r - 22035;
    </tr>
#'''Radius secret key''' - aG7ilh2QgAHR6exu;
    <tr>
        <td style="border-bottom: 4px solid white>
# '''Require Message-Authenticator''' - Off;
# '''RADIUS server #1''' - 35.195.229.202;
# '''RADIUS server #2''' - 35.205.163.75;
# '''Authentication port''' - 27169;
# '''Accounting port''' - 27170;
#'''Radius secret key''' - fQgwlMcJAENeOyVR;
# '''Save & Apply'''.
# '''Save & Apply'''.
[[File:Irohotspot.png|border|center]]
        </td>
 
    </tr>
</table>
==Test your Hotspot==
==Test your Hotspot==


Retrieved from "https://wiki.teltonika-networks.com/view/Ironwifi.com_Hotspot_Configuration_on_RutOS_firmware"