TRB141 1-Wire Setup/Configuration: Difference between revisions
(Created page with "<p style="color:red">The information on this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.04'''] firmware version....") |
|||
| Line 9: | Line 9: | ||
* TRB141 | * TRB141 | ||
* 1-Wire sensor | * 1-Wire sensor | ||
* | * If 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141 | ||
==Connecting 1-Wire Sensor with TRB141== | ==Connecting 1-Wire Sensor with TRB141== | ||
Revision as of 10:27, 8 March 2023
The information on this page is updated in accordance with 00.07.04 firmware version.
Introduction
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with TRB141.
Prerequisites
- TRB141
- 1-Wire sensor
- If 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141