Ironwifi.com Hotspot Configuration on RutOS firmware: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 24: Line 24:
----
----
Click on your '''created network.'''
Click on your '''created network.'''
[[File:IronWiFi created network.png|border|center|class=tlt-border|904x337px]]
[[File:IronWiFi created networkV2.png|border|center|class=tlt-border|904x337px]]
You will be taken to a window where all detailed Radius server information will be displayed.
You will be taken to a window where all detailed Radius server information will be displayed.
[[File:IronWiFi network details.png|border|center|class=tlt-border|1138x800px]]
[[File:IronWiFi network detailsV2.png|border|center|class=tlt-border|1138x800px]]
===Add Wifi Guest Accounts===
===Add Wifi Guest Accounts===
----
----
Line 52: Line 52:
* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
* Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
* Go to the '''Network → Wireless''' page.
* Go to the '''Network → Wireless''' page.
* '''Click 'Add'''' to create a new Wireless Access Point. Depending on your needs, choose a 2.4 GHz ('''1''') or 5 GHz ('''2''') Access Point.
* '''Click 'Add'''' to create a new Wireless Access Point.


[[File:WiFi interfaces.png|border|center|class=tlt-border|808x563px]]
[[File:WiFi interfacesV2.png|border|center|class=tlt-border|808x563px]]


Edit your new Access Point as below:
Edit your new Access Point as below:


# Check '''Enable;'''
# Check '''Enable''';
# Mode - '''Access Point''';
# Radios - Select desired radio;
# ESSID - Your desired Extended Service Set Identifier name;
# SSID - Your desired Extended Service Set Identifier name;
# Network - Choose the network you want to attach to this wireless interface or fill out the create field to define a new network.
# Network - Select --No network--
[[File:Cobot WiFi interface.png|border|center|class=tlt-border|805x373px]]
[[File:Cobot WiFi interfaceV2.png|border|center|class=tlt-border|805x373px]]


Navigate to '''Wireless Security''' tab and choose your  
Navigate to '''Wireless Security''' tab and choose your  
# '''Encryption method'''
# Encryption - '''No encryption'''
# '''Cipher'''
[[File:Cobot WiFi interface securityV2.png|border|center|class=tlt-border|808x269px]]
# '''Password'''
[[File:Cobot WiFi interface security.png|border|center|class=tlt-border|808x269px]]
===Set up hotspot===
===Set up hotspot===
----
----
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.
Navigate to '''''Services''' → '''Hotspot''''' and add a new Hotspot Instance. To do so, find the '''Add New Instance''' section and select your Wireless AP in the interface list, then press '''Add'''.


[[File:Add hotspot.png||border|center|class=tlt-border|783x167px]]
[[File:Add hotspotV2.png||border|center|class=tlt-border|783x167px]]


'''Hotspot configuration'''
'''Hotspot configuration'''
Line 79: Line 77:
In the '''General tab''' do the following steps:
In the '''General tab''' do the following steps:


# Check '''Enable;'''
# Authentication mode - '''Radius''';
# Authentication mode - '''Radius'''.
# Check '''Enable'''.
[[File:Hotspot config.png|border|center|class=tlt-border|827x445px]]
[[File:Hotspot configV2.png|border|center|class=tlt-border|827x445px]]




Then go to '''Radius''' tab and enter the Radius server configuration details from ironwifi:
Then go to '''Radius''' tab and enter the Radius server configuration details from ironwifi:


# '''RADIUS Servers''' - 35.189.111.2, 35.189.127.125;
# '''RADIUS server #1''' - 35.195.229.202;
# '''Authentication port''' - 22035;
# '''RADIUS server #2''' - 35.205.163.75;
# '''Accounting port''' - 22036;
# '''Authentication port''' - 27169;
# '''NAS Identifie'''r - 22035;
# '''Accounting port''' - 27170;
#'''Radius secret key''' - aG7ilh2QgAHR6exu;
#'''Radius secret key''' - fQgwlMcJAENeOyVR;
# '''Save & Apply'''.
# '''Save & Apply'''.
[[File:Irohotspot.png|border|center]]
[[File:IrohotspotV2.png|border|center]]


==Test your Hotspot==
==Test your Hotspot==

Revision as of 11:16, 26 November 2024

Main Page > IoT Platforms > IoT > Ironwifi.com Hotspot Configuration on RutOS firmware

Summary

This chapter is a guide on configuring ironwifi.com provider hotspot instance on RUTX routers. This setup is also applicable to RUT series devices.

Step 1: ironwifi.com configuration

Login

First, go to console.ironwifi.com/login and log into your account. If you don't have a registered account then you will need to create one - click Open Account.

Sign Up

After clicking Open Account you will be redirected to register page. Enter you account information and click Submit. To complete registration go to your email inbox.

550×499px
550×499px

Set Up new radius server

In the opened window click Networks.

Then - New Network and you will be prompted to create a new network.

931×292px
931×292px

Enter your desired network name can click Create.

Network details

Click on your created network.

You will be taken to a window where all detailed Radius server information will be displayed.

Add Wifi Guest Accounts

Open Users tab and create New User for your WiFi.

Type Username and click Create User.

Click on your user.

To set a password click on the Password.


All created users is displayed under Users tab.

Step 2: Router configuration

If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI.

Creating wireless access point

If you have already set up your wireless access point - skip this step.

  • Login to your router's WebUI. You can do this by entering the router's LAN IP address (192.168.1.1 by default) into the URL field of your web browser.
  • Go to the Network → Wireless page.
  • Click 'Add' to create a new Wireless Access Point.

Edit your new Access Point as below:

  1. Check Enable;
  2. Radios - Select desired radio;
  3. SSID - Your desired Extended Service Set Identifier name;
  4. Network - Select --No network--

Navigate to Wireless Security tab and choose your

  1. Encryption - No encryption

Set up hotspot

Navigate to Services → Hotspot and add a new Hotspot Instance. To do so, find the Add New Instance section and select your Wireless AP in the interface list, then press Add.

Hotspot configuration

In the General tab do the following steps:

  1. Authentication mode - Radius;
  2. Check Enable.


Then go to Radius tab and enter the Radius server configuration details from ironwifi:

  1. RADIUS server #1 - 35.195.229.202;
  2. RADIUS server #2 - 35.205.163.75;
  3. Authentication port - 27169;
  4. Accounting port - 27170;
  5. Radius secret key - fQgwlMcJAENeOyVR;
  6. Save & Apply.
File:IrohotspotV2.png

Test your Hotspot

Try connecting to your router using computer or mobile phone.

  • Select the newly created hotspot;
  • After successful connection visit any website and you will be redirected to hotspot login page. Type your username and password;
  • Click Login;
  • You should see a message Authorization Successful;


See also

https://www.ironwifi.com/

Ironwifi.com Hotspot Configuration on Legacy firmware

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Ironwifi.com_Hotspot_Configuration_on_RutOS_firmware&oldid=137628"