TAP100 Powering Options: Difference between revisions
m (Vainius.l moved page TAP100 Powering Options to Draft:TAP100 Powering Options) |
m (Vainius.l moved page Draft:TAP100 Powering Options to TAP100 Powering Options over redirect) |
(No difference)
| |
Latest revision as of 07:57, 25 May 2023
Main Page > TAP Access Points > TAP100 > TAP100 Manual > TAP100 Powering OptionsThis chapter contains information on powering options supported by TAP100 access points.
Active PoE
The device can be powered by an ethernet cable via the ethernet port .
- TAP100 devices support active PoE standard: 802.3af PoE Class 1
- Working voltage levels: 44.0–57.0 V
| Pin | 10/100 mode B, DC on spares | T568A Color | T568B Color | Pins on plug face (socket is reversed) | |
| 1 | TX+ |  white/green stripe |
 white/orange stripe |
| |
| 2 | TX- |  green solid |
 orange solid | ||
| 3 | RX+ | white/orange stripe |
white/green stripe | ||
| 4 | DC+ | 44–57 V |  blue solid |
blue solid | |
| 5 | DC+ | 44–57 V |  white/blue stripe |
white/blue stripe | |
| 6 | RX- | orange solid |
green solid | ||
| 7 | DC- |  white/brown stripe |
white/brown stripe | ||
| 8 | DC- |  brown solid |
brown solid | ||