TAP100 Powering Options

From Teltonika Networks Wiki
Main Page > TAP Access Points > TAP100 > TAP100 Manual > TAP100 Powering Options

This chapter contains information on powering options supported by TAP100 access points.

Active PoE

The device can be powered by an ethernet cable via the ethernet port .

Networking TAP100 lower manual powering options lan1 v1.png

  • TAP100 devices support active PoE standard: 802.3af PoE Class 1
  • Working voltage levels: 44.0–57.0 V

RJ45 pinout:
Pin 10/100 mode B, DC on spares T568A Color T568B Color Pins on plug face (socket is reversed)
1 TX+ Poe white green stripe.png
white/green stripe 		Poe white orange stripe.png
white/orange stripe 		Poe rj45 connector.png
2 TX- Poe solid green.png
green solid 		Poe solid orange.png
orange solid
3 RX+ Poe white orange stripe.png
white/orange stripe 		Poe white green stripe.png
white/green stripe
4 DC+ 44–57 V Poe solid blue.png
blue solid 		Poe solid blue.png
blue solid
5 DC+ 44–57 V Poe white blue stripe.png
white/blue stripe 		Poe white blue stripe.png
white/blue stripe
6 RX- Poe solid orange.png
orange solid 		Poe solid green.png
green solid
7 DC- Poe white brown stripe.png
white/brown stripe 		Poe white brown stripe.png
white/brown stripe
8 DC- Poe solid brown.png
brown solid 		Poe solid brown.png
brown solid
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=TAP100_Powering_Options&oldid=107821"