TSW202 LLDP: Difference between revisions
(Created page with "{{Template: Networking_tswos_manual_mrp <!------------------------DEVICE-----------------------> | name = TSW202 | series = TSW2 <!----------------------SEPARATORS----...") |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Template: | {{Template: Networking_tswos_manual_lldp | ||
<!------------------------DEVICE-----------------------> | <!------------------------DEVICE-----------------------> | ||
| name = TSW202 | | name = TSW202 | ||
Revision as of 15:46, 11 October 2023
Main Page > TSW Switches > TSW202 > TSW202 Manual > TSW202 WebUI > TSW202 Services section > TSW202 LLDPThe information in this page is updated in accordance with firmware version TSW2_R_00.01.03.1.
Summary
The LLDP (Link Layer Discovery Protocol) is a vendor-neutral link layer protocol used by network devices for advertising their identity, capabilities, and neighbors on a local area network based on IEEE 802 technology, principally wired Ethernet.
LLDP Configuration
The LLDP Configuration section is used to choose the ports you want to send LLDP frames to. This helps in discovering and monitoring network devices connected to those specific ports.
| Field | Value | Description |
|---|---|---|
| Enable | off | on; default: off | Enables LLDP service. Note: SNMP will be enabled when enabling LLDP. |
| Interval | integer [1..65535]; default: 5 | The LLDP interval represents the frequency of network device updates and is measured in seconds. |
| Mark selected ports (0) as | -(interactive) buttons -Enable | Disable | Choose the ports you want to send LLDP frames to. |
LLDP Neighbors
The LLDP Neighbors section displays current LLDP neighbors.
| Field Name | Description |
|---|---|
| Port name | Name of physical port. |
| Station name | Neighbors station name. |
| Chassis ID | Identifier of the chassis. |
| IP address | Neighbors device IP. |
| Port description | Neighbors port description |