802.11r WiFi roaming configuration example: Difference between revisions
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
__TOC__ | |||
==Introduction== | ==Introduction== | ||
This article provides a basic configuration example of WiFi roaming. | This article provides a basic configuration example of WiFi roaming. | ||
==Firmwware== | |||
<p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.09'''] firmware version. .</p> | |||
==Prerequisites== | ==Prerequisites== | ||
* Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example) | * Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example) | ||
* Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example) | * Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example) | ||
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI. | Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI. | ||
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]] | [[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]] | ||
==Configuration== | |||
Revision as of 03:58, 26 September 2024
Introduction
This article provides a basic configuration example of WiFi roaming.
Firmwware
The information in this page is updated in accordance with 00.07.09 firmware version. .
Prerequisites
- Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
- Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)
Before you start configuring the router turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
