L2TP over IPsec: Difference between revisions

Revision as of 08:01, 8 June 2018

Introduction

Layer 2 Tunneling Protocol (L2TP) is a VPN tunneling protocol that allows remote clients to use the public IP network to securely communicate with private corporate network servers. L2TP uses PPP over UDP (port 1701) to tunnel the data.

Configuration overview and prerequisites

Before we begin, let's overview the configuration that we are attempting to achieve and the prerequisites that make it possible.

Prerequisites:

Two RUTxxx routers of any type (excluding RUT850)
At least one router with a Public Static or Public Dynamic IP addresses
At least one end device (PC, Laptop, Tablet, Smartphone) to configure the routers

Configuration scheme:

The figure above depicts the L2TP/IPsec scheme. It is fairly similar to the L2TP and IPsec configuration schemes - the router with the Public IP address (RUT1) acts as the L2TP/IPsec server and the other router (RUT) acts a client. L2TP connects the networks of RUT1 and RUT2 and IPsec provides the encryption for the L2TP tunnel.

Router configuration

If you have familiarized yourself with the configuration scheme and have all of the devices in order, we can start configuring the routers using instructions provided in this section. To summarize, we'll be configuring an L2TP server and an IPsec Transport instance (server) on RUT1; an L2TP client and an IPsec Transport instance (client) on RUT2.

IPsec

First, you must configure a working IPsec Transport connection. This subsection contains instructions on how to do just that. The relevant parameters will be encapsulated in red rectangles. Explanations about these parameters will be provided under each example. Other used parameters will be defaults; you can find explanations for those parameters in the VPN manual page, IPsec section.

@@ Line 16: / Line 16: @@
 [[File:Configuration examples l2tp over ipsec scheme.png]]
-The figure above above depicts two RUTxxx routers (RUT1 and RUT2) connected by an IPsec tunnel via the Internet.
+The figure above depicts the L2TP/IPsec scheme. It is fairly similar to the [[L2TP_configuration_examples#Configuration_overview_and_prerequisites|L2TP]] and [[IPsec_configuration_examples#Configuration_overview_and_prerequisites|IPsec]] configuration schemes - the router with the Public IP address (''RUT1'') acts as the L2TP/IPsec server and the other router (''RUT'') acts a client. L2TP connects the networks of ''RUT1'' and ''RUT2'' and IPsec provides the encryption for the L2TP tunnel.
 ==Router configuration==
+If you have familiarized yourself with the configuration scheme and have all of the devices in order, we can start configuring the routers using instructions provided in this section. To summarize, we'll be configuring an L2TP server and an IPsec Transport instance (server) on ''RUT1''; an L2TP client and an IPsec Transport instance (client) on ''RUT2''.
 ===IPsec===
 ----
+First, you must configure a working IPsec Transport connection. This subsection contains instructions on how to do just that. The relevant parameters will be encapsulated <span style="color:red">'''in red rectangles'''</span>. Explanations about these parameters will be provided under each example. Other used parameters will be defaults; you can find explanations for those parameters in the '''[[VPN#IPsec|VPN manual page, IPsec section]]'''.
-====Server====
+====Server (RUT1)====
 ----
+*
-====Client====
+[[File:L2tp over ipsec ipsec server.png]]
+====Client (RUT2)====
 ----
+*
+[[File:L2tp over ipsec ipsec server.png]]
 ===L2TP===
 ----
+==See also==
+* Other types of VPNs suported by RUTxxx devices:
+** [[L2TP configuration examples]]
+** [[IPsec configuration examples]]
+** [[OpenVPN configuration examples]]
+** [[PPTP configuration examples]]