Difference between revisions of "Template:Networking rut2xx manual modbus modbus tcp table"
From Teltonika Networks Wiki
Line 1: | Line 1: | ||
<table class="nd-mantable"> | <table class="nd-mantable"> | ||
<tr> | <tr> | ||
− | <th> | + | <th>Field</th> |
− | <th> | + | <th>Value</th> |
− | <th> | + | <th>Description</th> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Enable</td> | <td>Enable</td> | ||
− | <td>yes | no; | + | <td>yes | no; default: <b>none</b></td> |
− | <td> | + | <td>Turns Modbus TCP on or off.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Port</td> | <td>Port</td> | ||
− | <td>integer [0..65535]; | + | <td>integer [0..65535]; default: <b>none</b></td> |
− | <td> | + | <td>TCP port used for Modbus communications.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Allow Remote Access</td> | <td>Allow Remote Access</td> | ||
− | <td>yes | no; | + | <td>yes | no; default: <b>no</b></td> |
− | <td>Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above</td> | + | <td>Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above.</td> |
</tr> | </tr> | ||
<tr> | <tr> | ||
<td>Mobile Traffic Usage Logging</td> | <td>Mobile Traffic Usage Logging</td> | ||
− | <td>yes | no; | + | <td>yes | no; default: <b>no</b></td> |
− | <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]</b>). <br> This is required in order to read mobile data usage information from Modbus registers</td> | + | <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]</b>). <br> This is required in order to read mobile data usage information from Modbus registers.</td> |
</tr> | </tr> | ||
</table> | </table> |
Latest revision as of 12:51, 23 July 2019
Field | Value | Description |
---|---|---|
Enable | yes | no; default: none | Turns Modbus TCP on or off. |
Port | integer [0..65535]; default: none | TCP port used for Modbus communications. |
Allow Remote Access | yes | no; default: no | Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above. |
Mobile Traffic Usage Logging | yes | no; default: no | Enables Mobile Traffic Usage Logging (can also be enabled from Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]). This is required in order to read mobile data usage information from Modbus registers. |