|
|
| Line 13: |
Line 13: |
| | file_rms = Networking_rutxxx_manual_setup_wizard_rms_v1.png | | | file_rms = Networking_rutxxx_manual_setup_wizard_rms_v1.png |
| }} | | }} |
| <!--
| |
| ==Summary==
| |
|
| |
| The configuration wizard provides a simple way of quickly configuring the device in order to bring it up to basic functionality. The wizard is comprised out of 5 steps and they are as follows:
| |
|
| |
| ===Step 1===
| |
| ----
| |
| The first window of Setup Wizard prompts you to change the router's '''[[RUT955 Administration#General|default password]]''' and '''[[NTP|time zone]]'''. Both of these steps are not mandatory but it is '''highly recommended that you change the default password''' because if you don't the router becomes highly vulnerable to online attacks.
| |
|
| |
|
| |
| [[Image:System setup wizard step 1.PNG]]
| |
|
| |
| ===Step 2===
| |
| ----
| |
| The second window of Setup Wizard is used to configure your '''[[Mobile]]''' settings. Most SIM cards will work with the default settings, but some features have special requirements. For example, if your operator provides you with the Static Public IP feature, you must enter an Access Point Name (APN) for it to work, if you're planning on using PPP connection type, you must enter a dialing number in order to achieve a mobile data connection and etc.
| |
|
| |
|
| |
| [[Image:System setup wizard step 2.PNG]]
| |
|
| |
| ===Step 3===
| |
| ----
| |
| The third window of Setup Wizard is used to configure your router's '''[[LAN|Local Area Network (LAN)]]''' settings. Like all other steps, Step 3 is optional, meaning that the router will work fine with the default LAN settings. If you have multiple routers in your network it is recommended to change your router's LAN IP address to help differentiate it from other routers in your LAN, if you plan on having more than 150 devices connecting to your router, you should also change the DHCP range, etc.
| |
|
| |
|
| |
| [[Image:System setup wizard step 3.PNG]]
| |
|
| |
| ===Step 4===
| |
| ----
| |
| The fourth window of Setup Wizard is used to configure your router's '''[[Wireless|Wi-Fi settings]]'''. If you have more than one RUT router in you home/office, it is recommended that you change the Wireless SSID, since SSIDs identical RUT routers are identical. Also, the default Wi-Fi configuration uses no encryption. It recommended that you set up a password for your Wireless Access Point to keep out unwanted devices from connecting to your Wi-Fi network.
| |
|
| |
|
| |
| [[Image:System setup wizard step 4.PNG]]
| |
|
| |
| [[Category:RUT955 WebUI]]
| |
|
| |
| ===Step 5===
| |
| ----
| |
| The fifth and the final window of Setup Wizard is used to connect router to Remote Management System (RMS). Find out more information about RMS '''[[RMS|here]]'''.
| |
|
| |
| [[Image:Networking rutxxx manual setup wizard step 5 v1.png]]
| |
|
| |
| [[Category:RUT955 WebUI]]
| |
| -->
| |
