AnyViz

The AnyViz is now compatible with Teltonika TRB gateways.

Description

AnyViz is a modern cloud service for the automation industry. With the AnyViz Cloud Adapter you are able to connect your facilities, plants or machines to the AnyViz Cloud. Completely without complicated engineering tools you can immediately start with the online configuration of your Cloud HMI.

Disclaimer: this page describes installation of a third party (AnyViz) platform package, which was not developed by Teltonika. Teltonika is under no circumstances responsible for, including but not limited to, package's compatibility with the rest of Teltonika's functionality, interoperability with other services, security or general stability. The user of this package acknowledges and agrees that the Teltonika shall not be responsible or liable, whether directly or indirectly, for any damages or loss caused or sustained by the user, in connection with any use or reliance usage of said package.

Creating an account

First of all, you need to have an AnyViz account. After registration, you can test AnyViz with the range of the evaluation package.

The registration form can be found at: https://portal.anyviz.de/?register=true.

Below you can see registration form:

After successful registration and email confirmation, a project with a unique project ID is created automatically. The id is displayed after login on the left side of the portal. In this example, the ID is 982.

Installing AnyViz cloud adapter

AnyViz IoT platform is not included in the standard software package, so in order to use the feature we recommend installing AnyViz with the simple installation script. The script is executed via a single command and can be executed via SSH as well as via the device web interface.

1. Use Web browser to go to address http://192.168.2.1

2. Navigate to SERVICES → CLI

3. Type in “root” to login

4. Type in the same password as used for web interface

5. Type in the following command to start installation:

  wget -qO - http://install.anyviz.io/trb/ | sh

After a refresh of the web interface, a new element in the navigation named ANYVIZ occurs. Click on the AnyViz icon and start configuring your AnyViz Cloud Adapter.

Registering device

After AnyViz cloud adapter installation, in order to register device go to ANYVIZ → CONFIG and enter your project ID, define a secure password and click submit.

The cloud adapter should now appear in the AnyViz portal. In the configuration dialog of the Cloud Adapter the password from the last step must be confirmed.

Collect data of sensors and PLCs

The Universal Cloud Adapter supports many different protocols to connect data from control systems or devices such as meters and sensors to AnyViz.

The following protocols are available:

• OPC UA
• Modbus
• Siemens TCP
• M-Bus
• BACnet

Browse and process data

After successful confirmation the cloud adapter appears connected and all data can be comfortably browsed. All tags can be recorded, visualized or otherwise processed. For visualization, the data point is conveniently dragged and dropped into the view, where a selection with different visualization elements appears.

Supported devices

At the moment AnyViz cloud services are compatible with TRB140, TRB141, TRB142 and TRB145 gateways.

Readable parameters for TRB140, TRB141, TRB142, TRB145: Device status (online/offline), Operator, Connection type, Signal Quality, Signal dBm.

Readable parameters for TRB141: Analog Input voltage, Digital Input0, Digital Input1, Isolated Input, Relay.

External Links

https://www.anyviz.io/

https://www.anyviz.io/connectivity/

https://www.anyviz.io/features/

https://www.anyviz.io/getting-started/

https://www.youtube.com/channel/UCszDP0QuX_ZJxOMty1SrR9w