AnyViz

From Wiki Knowledge Base | Teltonika Networks
This is the approved revision of this page, as well as being the most recent.
Main Page > IoT Platforms > AnyViz
AnyViz-Logo.jpg

The AnyViz is now compatible with Teltonika TRB gateways.

Description[edit | edit source]

AnyViz is a modern cloud service for the automation industry. With the AnyViz Cloud Adapter you are able to connect your facilities, plants or machines to the AnyViz Cloud. Completely without complicated engineering tools you can immediately start with the online configuration of your Cloud HMI.

Disclaimer: this page describes installation of a third party (AnyViz) platform package, which was not developed by Teltonika. Teltonika is under no circumstances responsible for, including but not limited to, package's compatibility with the rest of Teltonika's functionality, interoperability with other services, security or general stability. The user of this package acknowledges and agrees that the Teltonika shall not be responsible or liable, whether directly or indirectly, for any damages or loss caused or sustained by the user, in connection with any use or reliance usage of said package.

Creating an account[edit | edit source]

First of all, you need to have an AnyViz account. After registration, you can test AnyViz with the range of the evaluation package.

The registration form can be found at: https://portal.anyviz.de/?register=true.

Below you can see registration form:

RegForm.png

After successful registration and email confirmation, a project with a unique project ID is created automatically. The id is displayed after login on the left side of the portal. In this example, the ID is 982.


FormGPB.png

Installing AnyViz cloud adapter[edit | edit source]

AnyViz IoT platform is not included in the standard software package, so in order to use the feature we recommend installing AnyViz with the simple installation script. The script is executed via a single command and can be executed via SSH as well as via the device web interface.

1. Use Web browser to go to address http://192.168.2.1

2. Navigate to SERVICES → CLI

3. Type in “root” to login

4. Type in the same password as used for web interface


Clii.png


5. Type in the following command to start installation:

  wget -qO - http://install.anyviz.io/trb/ | sh

After a refresh of the web interface, a new element in the navigation named ANYVIZ occurs. Click on the AnyViz icon and start configuring your AnyViz Cloud Adapter.


Web1.png

Registering device[edit | edit source]

After AnyViz cloud adapter installation, in order to register device go to ANYVIZ → CONFIG and enter your project ID, define a secure password and click submit.


AnyVizConfigPAss.png


The cloud adapter should now appear in the AnyViz portal. In the configuration dialog of the Cloud Adapter the password from the last step must be confirmed.

Confirmation.png

Collect data of sensors and PLCs[edit | edit source]

The Universal Cloud Adapter supports many different protocols to connect data from control systems or devices such as meters and sensors to AnyViz.

The following protocols are available:

  • OPC UA
  • Modbus
  • Siemens TCP
  • M-Bus
  • BACnet

Browse and process data[edit | edit source]

After successful confirmation the cloud adapter appears connected and all data can be comfortably browsed. All tags can be recorded, visualized or otherwise processed. For visualization, the data point is conveniently dragged and dropped into the view, where a selection with different visualization elements appears.


Networking Thirdparty platforms IoTplatforms Anyviz projectv1.png

Supported devices[edit | edit source]

At the moment AnyViz cloud services are compatible with TRB140, TRB141, TRB142 and TRB145 gateways.

Readable parameters for TRB140, TRB141, TRB142, TRB145: Device status (online/offline), Operator, Connection type, Signal Quality, Signal dBm.

Readable parameters for TRB141: Analog Input voltage, Digital Input0, Digital Input1, Isolated Input, Relay.

Disclaimer: this page describes installation of a third party (AnyViz) platform package, which was not developed by Teltonika. Teltonika is under no circumstances responsible for, including but not limited to, package's compatibility with the rest of Teltonika's functionality, interoperability with other services, security or general stability. The user of this package acknowledges and agrees that the Teltonika shall not be responsible or liable, whether directly or indirectly, for any damages or loss caused or sustained by the user, in connection with any use or reliance usage of said package.

External Links[edit | edit source]

https://www.anyviz.io/

https://www.anyviz.io/connectivity/

https://www.anyviz.io/features/

https://www.anyviz.io/getting-started/

https://www.youtube.com/channel/UCszDP0QuX_ZJxOMty1SrR9w