Template:Networking device manual powering options passive poe: Difference between revisions
| Line 12: | Line 12: | ||
</font> | </font> | ||
{{Template: networking_rutx_device_manual_powering_options_passive_poe_table}} | {{#ifeq:{{{series}}}|RUTX| | ||
{{Template: networking_rutx_device_manual_powering_options_passive_poe_table}}| | |||
{{Template: networking_device_manual_powering_options_passive_poe_table}} | |||
}} | |||
Revision as of 11:20, 25 March 2020
Passive PoE
The device may also be powered by an Ethernet cable via the LAN1 port:
[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]
- The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
- The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.
| Pin | 10/100 mode B, DC on spares | T568A Color | T568B Color | Pins on plug face (socket is reversed) | |
| 1 | TX+ |  white/green stripe |
 white/orange stripe |
| |
| 2 | TX- |  green solid |
 orange solid | ||
| 3 | RX+ | white/orange stripe |
white/green stripe | ||
| 4 | DC+ | 9-30 VDC |  blue solid |
blue solid | |
| 5 | DC+ | 9-30 VDC |  white/blue stripe |
white/blue stripe | |
| 6 | RX- | orange solid |
green solid | ||
| 7 | DC- |  white/brown stripe |
white/brown stripe | ||
| 8 | DC- |  brown solid |
brown solid | ||