Template:Networking device manual powering options passive poe

From Teltonika Networks Wiki
This is the approved revision of this page, as well as being the most recent.

Passive PoE

The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use in other ports!)

[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]

  • The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
  • The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.

RJ45 pinout:
Pin 10/100 mode B, DC on spares T568A Color T568B Color Pins on plug face (socket is reversed)
1 TX+ Poe white green stripe.png
white/green stripe
Poe white orange stripe.png
white/orange stripe
Poe rj45 connector.png
2 TX- Poe solid green.png
green solid
Poe solid orange.png
orange solid
3 RX+ Poe white orange stripe.png
white/orange stripe
Poe white green stripe.png
white/green stripe
4 DC+ 9-30 VDC Poe solid blue.png
blue solid
Poe solid blue.png
blue solid
5 DC+ 9-30 VDC Poe white blue stripe.png
white/blue stripe
Poe white blue stripe.png
white/blue stripe
6 RX- Poe solid orange.png
orange solid
Poe solid green.png
green solid
7 DC- Poe white brown stripe.png
white/brown stripe
Poe white brown stripe.png
white/brown stripe
8 DC- Poe solid brown.png
brown solid
Poe solid brown.png
brown solid