Difference between revisions of "TRB255 Routes"
(Created page with "{{Template:Networking_rutos_manual_routes | name = TRB255 | series = TRB2XX }}") |
|||
Line 1: | Line 1: | ||
{{Template:Networking_rutos_manual_routes | {{Template:Networking_rutos_manual_routes | ||
− | | name | + | <!------------------------DEVICE-----------------------> |
− | | series | + | | name = TRB255 |
+ | | series = TRB2 | ||
}} | }} |
Latest revision as of 11:00, 8 December 2020
Main Page > TRB Gateways > TRB255 > TRB255 Manual > TRB255 WebUI > TRB255 Status section > TRB255 RoutesThe information in this page is updated in accordance with firmware version TRB2_R_00.07.08.2.
Summary
The Routes page displays the router's ARP table and active IPv4 and IPv6 routes. This chapter is an overview of the Routes page of TRB255 routers.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
General Routes
ARP
The Address Resolution Protocol (ARP) is a communication protocol used for mapping an Internet Protocol address (IP address) to a physical machine's link layer address (MAC address) belonging to the local network.
The ARP section displays the router's ARP cache (also known as ARP table) data. The ARP cache contains information on each known MAC address and its corresponding IP address. When the router receives a packet destined for a local host, the ARP program attempts to find a physical host or MAC address in the ARP cache that matches the IP address. If the ARP cache doesn't contain the needed IP address, ARP broadcasts a request packet to all LAN machines in order to find the device with the IP address in question.
The figure below is an example of the ARP cache section:
Field name | Value | Description |
---|---|---|
IP address | ip; Default: none | IP address of a local host. |
MAC address | mac; Default: none | MAC address of a local host. |
Interface | string; Default: none | Interface through which the router is associated with the host. |
You can also view the ARP cache via shell using the arp or ip neigh commands, depending on which output your prefer:
root@Teltonika-TRB255:~# arp IP address HW type Flags HW address Mask Device 192.168.1.151 0x1 0x2 18:d6:c7:00:00:00 * br-lan
root@Teltonika-TRB255:~# ip neigh 192.168.1.151 dev br-lan lladdr 18:d6:c7:00:00:00 REACHABLE
IPv4 Routes
The IPv4 Routes section displays the router's routing table. A routing table contains a list of routes to network destinations associated with and known by the router.
The figure below is an example of the Active IP routes section:
Field name | Value | Description |
---|---|---|
Network | string; Default: none | Associated network interface name. |
Target | ip | ip/netmask; Default: none | Destination network address. |
IPv4 gateway | ip; Default: none | Indicates the IP address of the gateway through which the target network can be reached. |
Metric | integer [0..4,294,967,295]; Default: none | Metrics help the router choose the best route among multiple feasible routes to a destination. The route will go in the direction of the gateway with the lowest metric value. |
Table | string | integer; Default: none | Name or number of the associated routing table. |
You can also view the routing table via shell using the route or ip route commands, depending on which output your prefer:
root@Teltonika-TRB255:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.2.1 0.0.0.0 UG 0 0 0 eth1 192.168.1.0 * 255.255.255.0 U 0 0 0 br-lan
root@Teltonika-TRB255:~# ip route default via 192.168.2.1 dev eth1 192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1
IPv6 routes
The IPv6 Routes section displays the router's IPv6 routing table.
The figure below is an example of the IPv6 routes section:
Field name | Value | Description |
---|---|---|
Network | string; Default: none | Associated network interface name. |
Target | ip6 | ip6/netmask; Default: none | Destination network address. |
IPv6-Gateway | ip6 | ip6/netmask; Default: none | Source of the network address. |
Metric | integer [0..4,294,967,295]; Default: none | Metrics help the router choose the best route among multiple feasible routes to a destination. The route will go in the direction of the gateway with the lowest metric value. |
Table | string | integer; Default: none | Name or number of the associated routing table. |
You can also view the routing table via shell using the route -A inet6 or ip -6 route show commands, depending on which output your prefer:
root@Teltonika-TRB255:~# ip -6 route fdb2:7fc0:b88f::/64 dev br-lan proto static metric 1024 ff00::/8 dev eth1 proto kernel metric 256 ff00::/8 dev br-lan proto kernel metric 256 ff00::/8 dev ath1 proto kernel metric 256
IPv6 Neighbours
The IPv6 Neighbours section displays IPv6 associated neighbours.
The figure below is an example of the Active IPv6 Neighbours section:
Field name | Value | Description |
---|---|---|
IPv6 Address | ip6; Default: none | IPv6 address of the associated neighbour. |
MAC Address | ip6; Default: none | MAC address of the associated neighbour. |
Interface | string; Default: none | Name of the associated network interface. |
Dynamic routes
The Dynamic routes page contains multiple sections, each of which displays the routing data of a Dynamic Routing protocol supported by the device. Data is only displayed once a protocol is configured and enabled. Else, each section is empty.