Template:Networking rutos manual mobile utilities: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 1: Line 1:
==Summary==
==Summary==


{{{name}}} routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get
{{{name}}} routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.
configurations, monitor and issue commands to the router.


==SMS Utilities==
==SMS Utilities==
Line 8: Line 7:
===Default Rules===
===Default Rules===
----
----
The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.
The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.  


[[Image:Networking_rutx_manual_mobile_utilities_sms_rules_v1.png|border|class=tlt-border | 1102x1102px]]
[[Image:Networking_rutx_manual_mobile_utilities_sms_rules_v1.png|border|1047x1047px]]


The entire list contains 17 rules but you are also be provided with the possibility to configure custom ones or edit the
The entire list contains 17 rules but you are also be provided with the possibility to configure custom ones or edit the existing rules.
existing rules.


All default configuration options are listed below:
All default configuration options are listed below:
 
*Reboot          
*Reboot
*Send_status  
*Send_status
     
*Mobile (on)
*Ioset
*Mobile (off)
{{#ifeq:
*Iostatus
{{#ifeq:{{{wifi}}}| 1|         
*Wifi(on)         
*Wif (off)       
}}
{{#ifeq:{{{mobile}}}| 1|   
*Mobile (on)      
*Mobile (off)    
}}
*VPN (on)         
*VPN (off)       
*VPN status
{{#ifeq:{{{mobile}}}| 1|           
*Change mobile settings
}}
*List of profile
*SSH_access (on)
*SSH_access (on)
*SSH_access (off)
*SSH_access (off)
Line 43: Line 24:
*Web_access (off)
*Web_access (off)
*Firstboot
*Firstboot
{{#ifeq:{{{mobile}}}| 1|   
*Switch SIM
*Switch SIM
}}
{{#ifeq:{{{series}}}| RUTX|{{#ifeq:{{{mobile}}}| 1 |   
*GPS coordinates
*GPS coordinates
*GPS (off)
*GPS (on)
*GPS (on)
*GPS (off)
}}
}}
*Fw_upgrade
*Fw_upgrade
*RMS status
*Monitoring (on)
*Rms connect
*Monitoring (off)
*Rms action (on)
*Uci
*Rms action (off)
*Monitoring status
*More


===Execution===
===Execution===
----
----
To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send
To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text '''“reboot”''', the router will reboot if the selected Authorization method is '''“No authorization”'''. However, if there is an Authorization method present you will need to include the '''“Authorization key”''' in the text message. This '''“Authorization key”''' depends on the chosen '''Authorization method''', i.e., if the method is '''“By serial”''', the '''“Authorization key”''' is the router’s serial number, if the method is '''“By router admin password”''', the '''“Authorization key”''' is the router’s admin password.
a message with the text '''“reboot”''', the router will reboot if the selected Authorization method is '''“No
authorization”'''. However, if there is an Authorization method present you will need to include the '''“Authorization
key”''' in the text message. This '''“Authorization key”''' depends on the chosen '''Authorization method''', i.e., if
the method is '''“By serial”''', the '''“Authorization key”''' is the router’s serial number, if the method is '''“By
router admin password”''', the '''“Authorization key”''' is the router’s admin password.


The '''"Authorization key”''' must precede the activation text and they must be separated by a space symbol. For
The '''"Authorization key”''' must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is '''“By router admin password”''' and the password is '''“admin01”''', the entire message should look like this: '''“admin01 reboot”'''. The same applies to '''“By serial”''' authorization. By default authorization for SMS utilities are set "'''By router admin password".'''
example, if the chosen Authorization method is '''“By router admin password”''' and the password is '''“admin01”''', the
entire message should look like this: '''“admin01 reboot”'''. The same applies to '''“By serial”''' authorization. By
default authorization for SMS utilities are set "'''By router admin password".'''


===Rule Overview and editing===
===Rule Overview and editing===
----
----
Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the '''Edit'''
Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the '''Edit''' button next to any SMS Utilities rules. This guide will contain information on editing every single SMS Utilities rule.
button next to any SMS Utilities rules. This guide will contain information on editing every single SMS Utilities rule.
===SMS rule General settings===
===SMS rule General settings===
----
----
Line 86: Line 50:
[[Image:Networking trb manual mobile utilities reboot Authorization settings v1.png|border]]
[[Image:Networking trb manual mobile utilities reboot Authorization settings v1.png|border]]


Above is an example of what '''SMS Configuration''' '''General''' and '''Authorization''' settings windows looks like,
Above is an example of what '''SMS Configuration''' '''General''' and '''Authorization''' settings windows looks like, specifically, '''SMS Configuration''' for the '''Reboot''' rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.  
specifically, '''SMS Configuration''' for the '''Reboot''' rule. Below is a table with detailed explanations on how to
 
configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be
provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar.
Instead, only tables containing information on how to edit each rule will be provided.
====Reboot====
====Reboot====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable SMS reboot function</td><td>Allows router to restart via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Reboots the router</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td></tr><tr><td>Get status via SMS after reboot</td><td>Check this to receive connection status via SMS after the reboot</td><td>If enabled, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Gateway modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available
<tr>
</td><td>You can select which status elements to display</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use</td><td>Possible values:
      <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
  <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
    <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable SMS reboot function</td>
        <td>Allows router to restart via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Reboots the router</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td>
</tr>
<tr>
        <td>Get status via SMS after reboot</td>
        <td>Check this to receive connection status via SMS after the reboot</td>
        <td>If enabled, the router will send a status message once it has rebooted and is operational again. This is
            both a separate SMS Rule and an option under the SMS Reboot rule</td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Gateway modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Message text</td>
        <td>Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available
        </td>
        <td>You can select which status elements to display</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
====Send status====
====Send status====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable SMS status function</td><td>Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Gateway modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available
<tr>
</td><td>You can select which status elements to display</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
    <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
    <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
    <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable SMS status function</td>
        <td>Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS
            Reboot rule</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Returns an SMS message containing information about the status of the router. The type of information
            contained within the message can be specified in the '''Message text''' field</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Gateway modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Message text</td>
        <td>Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available
        </td>
        <td>You can select which status elements to display</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
====Switch mobile data ON/OFF====
====Switch mobile data ON/OFF====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the Switch mobile data function</td><td>Allows mobile control via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Turn mobile data ON or OFF</td></tr><tr><td>State</td><td>The state to which mobile data will be set when this rule is met.</td><td>If you set it as ON it will turn on mobile data if OFF it will turn it off.</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
  <tr>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>FIELD NAME</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
        <th>DESCRIPTION</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
        <th>EXPLANATION, NOTES</th>
</td></table>
</tr>
  <tr>
        <td>Enable</td>
        <td>This will enable or disable the Switch mobile data function</td>
        <td>Allows mobile control via SMS</td>
</tr>
  <tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Turn mobile data ON or OFF</td>
</tr>
  <tr>
        <td>State</td>
        <td>The state to which mobile data will be set when this rule is met.</td>
        <td>If you set it as ON it will turn on mobile data if OFF it will turn it off.</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====SSH access control====
====SSH access control====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the SSH access control function</td><td>Allows SSH access control via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Turns SSH access ON or OFF</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
<tr>
</td></tr><tr><td>Enable SSH access</td><td>Enables or Disables SSH access from LAN</td><td>If this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN</td></tr><tr><td>Enable remote SSH access</td><td>Enables or Disables SSH access from WAN</td><td>If this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
        <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable the SSH access control function</td>
        <td>Allows SSH access control via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Turns SSH access ON or OFF</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Enable SSH access</td>
        <td>Enables or Disables SSH access from LAN</td>
        <td>If this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN</td>
</tr>
<tr>
        <td>Enable remote SSH access</td>
        <td>Enables or Disables SSH access from WAN</td>
        <td>If this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Web access Control====
====Web access Control====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the Web access control function</td><td>Allows Web access control via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Turns access to WebUI ON or OFF</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
<tr>
</td></tr><tr><td>Enable HTTP access</td><td>Enables or Disables HTTP access from LAN</td><td>If this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN</td></tr><tr><td>Enable HTTPS access</td><td>Enables or Disables HTTPS access from LAN</td><td>If this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN</td></tr><tr><td>Enable remote HTTP access</td><td>Enables or Disables HTTP access from WAN</td><td>If this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN</td></tr><tr><td>Enable remote HTTPS access</td><td>Enables or Disables HTTPs access from WAN</td><td>If this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
        <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable the Web access control function</td>
        <td>Allows Web access control via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Turns access to WebUI ON or OFF</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Enable HTTP access</td>
        <td>Enables or Disables HTTP access from LAN</td>
        <td>If this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN</td>
</tr>
<tr>
        <td>Enable HTTPS access</td>
        <td>Enables or Disables HTTPS access from LAN</td>
        <td>If this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN</td>
</tr>
<tr>
        <td>Enable remote HTTP access</td>
        <td>Enables or Disables HTTP access from WAN</td>
        <td>If this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN</td>
</tr>
<tr>
        <td>Enable remote HTTPS access</td>
        <td>Enables or Disables HTTPs access from WAN</td>
        <td>If this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
====Restore to default====
====Restore to default====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the Restore to default function</td><td>Allows you to restore the router to it's default settings via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Executes a router reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
<tr>
</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
        <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable the Restore to default function</td>
        <td>Allows you to restore the router to it's default settings via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Executes a router reset, which means the router will reboot after this rule is executed and all custom
            configurations will be deleted and restored to default</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====FW upgrade from server====
====FW upgrade from server====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the FW upgrade from server function</td><td>Allows you to upgrade the router‘s FW via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
<tr>
</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
        <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable the FW upgrade from server function</td>
        <td>Allows you to upgrade the router‘s FW via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router
            will reboot and be unreachable for a couple of minutes after this rule is executed</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Digital output control====
====Digital output control====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the possibility to change output state</td><td>Allows you to change output state via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Changes output state</td></tr><tr><td>State</td><td>The state to which output will be set when this rule is met</td><td>If you set it as ON it will turn on output if OFF it will turn it off</td></tr><tr><td>Active timeout</td><td>Rule active for a specified time</td><td>If enabled, you can set specific time for how long you want to change output state</td></tr><tr><td>Seconds</td><td>Rule active for a specified time, format seconds</td><td>Write time, for how long you want to change output state</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
<tr>
</td></tr><tr><td>Output type</td><td>Type of output which will be activated</td><td>Select which output you want to use</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>FIELD NAME</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>DESCRIPTION</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
        <th>EXPLANATION, NOTES</th>
From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
</td></table>
<tr>
        <td>Enable</td>
        <td>This will enable or disable the possibility to change output state</td>
        <td>Allows you to change output state via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Changes output state</td>
</tr>
<tr>
        <td>State</td>
        <td>The state to which output will be set when this rule is met</td>
        <td>If you set it as ON it will turn on output if OFF it will turn it off</td>
</tr>
<tr>
        <td>Active timeout</td>
        <td>Rule active for a specified time</td>
        <td>If enabled, you can set specific time for how long you want to change output state</td>
</tr>
<tr>
        <td>Seconds</td>
        <td>Rule active for a specified time, format seconds</td>
        <td>Write time, for how long you want to change output state</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Output type</td>
        <td>Type of output which will be activated</td>
        <td>Select which output you want to use</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Force SIM switch====
====Force SIM switch====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the Force SIM switch function</td><td>Allows SIM switch via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Forces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the message)
<tr>
</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <th>FIELD NAME</th>
</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>DESCRIPTION</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>EXPLANATION, NOTES</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
</tr>
From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
</td></table>
        <td>Enable</td>
        <td>This will enable or disable the Force SIM switch function</td>
        <td>Allows SIM switch via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Forces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the
            message)
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====GPS control====
====GPS control====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This check box will enable or disable the GPS ON/OFF function</td><td>Allows you to control GPS via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Turns GPS ON or OFF
<tr>
</td></tr><tr><td>State</td><td>The state to which GPS will be set when this rule is met</td><td>If you set it as ON it will turn on GPS if OFF it will turn it off</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <th>FIELD NAME</th>
</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>DESCRIPTION</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>EXPLANATION, NOTES</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
</tr>
From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
</td></table>
        <td>Enable</td>
        <td>This check box will enable or disable the GPS ON/OFF function</td>
        <td>Allows you to control GPS via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Turns GPS ON or OFF
        </td>
</tr>
<tr>
        <td>State</td>
        <td>The state to which GPS will be set when this rule is met</td>
        <td>If you set it as ON it will turn on GPS if OFF it will turn it off</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====GPS coordinates====
====GPS coordinates====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the GPS coordinates function</td><td>Allows you to get GPS coordinates via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Sends you GPS coordinates of the router
<tr>
</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <th>FIELD NAME</th>
</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>DESCRIPTION</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>EXPLANATION, NOTES</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
</tr>
From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
</td></table>
        <td>Enable</td>
        <td>This will enable or disable the GPS coordinates function</td>
        <td>Allows you to get GPS coordinates via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Sends you GPS coordinates of the router
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Monitoring control====
====Monitoring control====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the Monitoring control function</td><td>Allows you to control RMS monitoring status via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Turns RMS monitoring ON or OFF
<tr>
</td></tr><tr><td>State</td><td>The state to which RMS monitoring will be set when this rule is met</td><td>If you set is as ON it will turn on RMS monitoring if OFF it will turn it off</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <th>FIELD NAME</th>
</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>DESCRIPTION</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>EXPLANATION, NOTES</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
</tr>
From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
</td></table>
        <td>Enable</td>
        <td>This will enable or disable the Monitoring control function</td>
        <td>Allows you to control RMS monitoring status via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Turns RMS monitoring ON or OFF
        </td>
</tr>
<tr>
        <td>State</td>
        <td>The state to which RMS monitoring will be set when this rule is met</td>
        <td>If you set is as ON it will turn on RMS monitoring if OFF it will turn it off</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Wake on LAN====
====Wake on LAN====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the Wake on LAN function</td><td>Provides the possibility to wake computers from sleep mode</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Wakes the specified computer from sleep mode
<tr>
</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <th>FIELD NAME</th>
</td></tr><tr><td>MAC address</td><td>Computer's MAC Address</td><td>A MAC address of a device you want to wake up</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>DESCRIPTION</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>EXPLANATION, NOTES</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
</tr>
From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
</td></table>
        <td>Enable</td>
        <td>This will enable or disable the Wake on LAN function</td>
        <td>Provides the possibility to wake computers from sleep mode</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Wakes the specified computer from sleep mode
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>MAC address</td>
        <td>Computer's MAC Address</td>
        <td>A MAC address of a device you want to wake up</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Mobile data limit status====
====Mobile data limit status====
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the mobile data limit status function</td><td>Allows you to get mobile data limit status via SMS</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Sends you mobile data limit status
<tr>
</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <th>FIELD NAME</th>
</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
        <th>DESCRIPTION</th>
No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <th>EXPLANATION, NOTES</th>
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
</tr>
From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
</td></table>
        <td>Enable</td>
        <td>This will enable or disable the mobile data limit status function</td>
        <td>Allows you to get mobile data limit status via SMS</td>
</tr>
<tr>
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Sends you mobile data limit status
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
 
===UCI API rule===
===UCI API rule===
----
----
The UCI rule lets you set or get any parameter from the router's configuration files.
The UCI rule lets you set or get any parameter from the router's configuration files.<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable the UCI API function</td><td>Allows you to set or get any configurations from the router</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met.</td><td>Sets or sends you any specified configurations of the router</td></tr><tr><td>SMS text</td><td>SMS text that will trigger the rule</td><td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
{| class="mw-collapsible mw-collapsed nd-mantable"      
'''Detailed explanations on how to use this function are presented in the table below'''
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Authorization method</td><td>What kind of authorization to use for SIM management</td><td>Possible values:
|-
No authorization | By serial | By router admin password; Default: '''By router admin password'''
| Enable || This will enable or disable the UCI API function || Allows you to set or get any configurations from the router
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
|-
From all numbers | From group | From single number; Default: '''From all numbers'''
| Action || The action to be performed when this rule is met. || Sets or sends you any specified configurations of the router
</td></table>The following are syntax examples for the UCI API rule:<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>uci get config.section.option"</td><td>Returns config option value</td><td>'''uci get network.wan.ipaddr''' - returns the router's WAN IP address</td></tr><tr><td>uci set config.section.option="value"</td><td>Sets config option</td><td>'''"uci set network.mobile.apn=example"''' - Changes mobile APN to example</td></tr><tr><td>uci show config</td><td>Returns the contents of a config file</td><td>'''uci show openvpn''' - returns the contents of the openvpn config file</td></tr><tr><td>uci show config.section</td><td>Returns the exact part of a config file (either section or the exact option value)</td><td>'''uci show network.ppp''' - returns the contents of the ppp interface section from the network config file</td></tr></table>As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our '''[[UCI command usage]]''' article.
|-
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter '''Detailed explanations on how to use this function are presented in the table below'''  
|-
| Modem || Select which modem you want to use || Which modem is configured
|-
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
|-
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
|}
 
The following are syntax examples for the UCI API rule:
{| class="nd-mantable"      
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
|-
| uci get config.section.option" || Returns config option value || '''uci get network.wan.ipaddr''' - returns the router's WAN IP address
|-
| uci set config.section.option="value" || Sets config option || '''"uci set network.mobile.apn=example"''' - Changes mobile APN to example
|-
| uci show config || Returns the contents of a config file || '''uci show openvpn''' - returns the contents of the openvpn config file
|-
| uci show config.section || Returns the exact part of a config file (either section or the exact option value) || '''uci show network.ppp''' - returns the contents of the ppp interface section from the network config file
|}
 
As you can see, the UCI rule requires that you know the names of the configuration files and the names of the
sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in
our '''[[UCI command usage]]''' article.


===Custom Rules===
===Custom Rules===
----
----
If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the
If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the '''Add Rule''' tab. Write SMS text, select an Action and press the '''Add''' button located next to it.
SMS Utilities page, where you will find the '''Add Rule''' tab. Write SMS text, select an Action and press the '''Add'''
button located next to it.


[[Image:Networking trb manual mobile utilities add rule v1.png|border]]
[[Image:Networking trb manual mobile utilities add rule v1.png|border]]


Configuring a new rule is very similar to editing default rules: you are provided with a list of '''Actions''', other
Configuring a new rule is very similar to editing default rules: you are provided with a list of '''Actions''', other fields are generated in accordance with which '''Action''' you choose.
fields are generated in accordance with which '''Action''' you choose.


==SMS Gateway==
==SMS Gateway==
Line 784: Line 192:
[[File:Networking rutx manual mobile utilities post get v1.png|border|1143x1143px]]
[[File:Networking rutx manual mobile utilities post get v1.png|border|1143x1143px]]


{| class="nd-mantable"      
<table class="nd-mantable"><tr><th>Field</th><th>Value</th><th>Description</th></tr><tr><td>Enable</td><td>off | on; default: '''off'''</td><td>Enable SMS management functionality through POST/GET
! Field !! Value !! Description
</td></tr><tr><td>Modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Gateway modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>User name</td><td>Default: '''user1'''</td><td>User name used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</td></tr><tr><td>Password</td><td>Default: '''user_pass'''</td><td>Password used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</td></tr></table>
|-
| Enable || off | on; default: '''off''' || Enable SMS management functionality through POST/GET  
|-
| Modem || Default: '''Modem 1''' || Which modem is used
|-
| Gateway modem || Default: '''Modem 1''' || Which modem is used
|-
| User name || Default: '''user1''' || User name used for authorization (5 characters minimum). Allowed characters <nowiki>(a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</nowiki>    
|-
| Password || Default: '''user_pass''' || Password used for authorization (5 characters minimum). Allowed characters <nowiki>(a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</nowiki>    
|}


Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be
Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:  
connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and
examples on how to use them:


<table class="nd-othertables_2">
<table class="nd-othertables_2">
     <tr>
     <tr>
         <th width=300">Action</th>
         <th width=300">Action</th>
        <th width=852">Post/get URL examples</th>
      <th width=852">Post/get URL examples</th>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>View mobile messages list</td>
      <td>View mobile messages list</td>
        <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_list?username=user1&password=user_pass
      <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_list?username=user1&password=user_pass</td>
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Read mobile message</td>
      <td>Read mobile message</td>
        <td>http://<span
      <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_read?username=user1&password=user_pass&number=1</td>
                style="color: black;">192.168.1.1</span>/cgi-bin/sms_read?username=user1&password=user_pass&number=1
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Send mobile message</td>
    <td>Send mobile message</td>
         <td>http://<span
         <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage</td>
                style="color: black;">192.168.1.1</span>/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>View mobile messages total</td>
    <td>View mobile messages total</td>
         <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_total?username=user1&password=user_pass
         <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_total?username=user1&password=user_pass</td>
        </td>
     </tr>
     </tr>
     <tr>
     <tr>
        <td>Delete mobile message</td>
    <td>Delete mobile message</td>
         <td>http://<span
         <td>http://<span style="color: black;">192.168.1.1</span>/cgi-bin/sms_delete?username=user1&password=user_pass&number=1</td>
                style="color: black;">192.168.1.1</span>/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
        </td>
     </tr>
     </tr>
</table>
</table>


<ul>
<ul>
     <li><b>192.168.1.1</b> - router's IP address. (Replace it with your [[{{{name}}}_LAN#General_Setup|LAN IP]] or
     <li><b>192.168.1.1</b> - router's IP address. (Replace it with your [[{{{name}}}_LAN#General_Setup|LAN IP]] or [[{{{name}}}_WAN#Operation_Modes|WAN IP]] (when connecting remotely))</li>
        [[{{{name}}}_WAN#Operation_Modes|WAN IP]] (when connecting remotely))</li>
     <li>SMS related post/get commands. Possible values are:
     <li>SMS related post/get commands. Possible values are:
         <ul>
         <ul>
Line 849: Line 235:
         </ul>
         </ul>
     </li>
     </li>
     <li><b>&</b> - separation symbol. After specifying the SMS command, other parameters must be separated by an
     <li><b>&</b> - separation symbol. After specifying the SMS command, other parameters must be separated by an <i>ampersand</i> (<i>&</i>) symbol</li>
        <i>ampersand</i> (<i>&</i>) symbol</li>
     <li><b>username</b> - SMS post/get configuration user name</li>
     <li><b>username</b> - SMS post/get configuration user name</li>
     <li><b>password</b> - SMS post/get configuration password</li>
     <li><b>password</b> - SMS post/get configuration password</li>
     <li><b>number</b> - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be
     <li><b>number</b> - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be viewed with the <i>sms_list</i> command.<br>Correct phone number format is:
        viewed with the <i>sms_list</i> command.<br>Correct phone number format is:
         <ul>
         <ul>
             <li><i>00</i> - number must be preceded by two zeros</li>
             <li><i>00</i> - number must be preceded by two zeros</li>
             <li><i>
             <li><i><country_code></i> - the next following element is the number holder's country code</li>
                    <country_code>
             <li><i><receivers_number></i> - phone number of the recipient</li>
                </i> - the next following element is the number holder's country code</li>
             <li><i>
                    <receivers_number>
                </i> - phone number of the recipient</li>
         </ul>
         </ul>
        For example, a valid number would be <b>0037012345678</b> (370 is country code and 12345678 is the receiver's
For example, a valid number would be <b>0037012345678</b> (370 is country code and 12345678 is the receiver's phone number, all preceded by 00)
        phone number, all preceded by 00)
     </li>
     </li>
     <li><b>text</b> - SMS message text</li>
     <li><b>text</b> - SMS message text</li>
Line 876: Line 255:
[[File:Networking rutx manual mobile utilities auto reply v1.png|border|1134x1134px]]
[[File:Networking rutx manual mobile utilities auto reply v1.png|border|1134x1134px]]


<table class="nd-mantable">
<table class="nd-mantable"><tr><th>Field</th><th>Value</th><th>Description</th></tr><tr><td>Enable</td><td>off | on; default: '''off'''</td><td>Toggles Auto Reply ON or OFF
    <tr>
</td></tr><tr><td>Reply SMS-Utilities rules</td><td>off | on; default: '''off'''</td><td>It will reply to sms rules, from SMS-Utilities</td></tr><tr><td>Don't save received messages</td><td>off | on; default: '''off'''</td><td>If enabled, the router will delete received SMS messages</td></tr><tr><td>Modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Gateway modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Mode</td><td>Default: '''Everyone'''</td><td>Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
        <th>Field</th>
 
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off | on; default: '''off'''</td>
        <td>Toggles Auto Reply ON or OFF
        </td>
    </tr>
    <tr>
        <td>Reply SMS-Utilities rules</td>
        <td>off | on; default: '''off'''</td>
        <td>It will reply to sms rules, from SMS-Utilities</td>
    </tr>
    <tr>
        <td>Don't save received messages</td>
        <td>off | on; default: '''off'''</td>
        <td>If enabled, the router will delete received SMS messages</td>
    </tr>
    <tr>
        <td>Modem</td>
        <td>Default: '''Modem 1'''</td>
        <td>Which modem is used</td>
    </tr>
    <tr>
        <td>Gateway modem</td>
        <td>Default: '''Modem 1'''</td>
        <td>Which modem is used</td>
    </tr>
    <tr>
        <td>Mode</td>
        <td>Default: '''Everyone'''</td>
        <td>Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
*'''Everyone'''
*'''Everyone'''
*'''Listed numbers'''
*'''Listed numbers'''
*'''From user group'''</td>
*'''From user group'''
    </tr>
</td></tr><tr><td>Message text</td><td>Default: " "</td><td>The message that will be sent in reply
    <tr>
</td></tr></table>
        <td>Message text</td>
        <td>Default: " "</td>
        <td>The message that will be sent in reply
        </td>
    </tr>
</table>


===SMS Forwarding===
===SMS Forwarding===
Line 934: Line 274:
[[Image:Networking trb manual mobile utilities sms to http v1.png|border]]
[[Image:Networking trb manual mobile utilities sms to http v1.png|border]]


<table class="nd-mantable">
<table class="nd-mantable"><tr><th>Field</th><th>Value</th><th>Description</th></tr><tr><td>Enable</td><td>off | on; default: '''off'''</td><td>Enable/disable SMS forwarding to HTTP</td></tr><tr><td>Forward SMS-Utilities rules</td><td>off | on; default: '''off'''</td><td>Enable/disable sms-utilities rules forwarding</td></tr><tr><td>Don't save received message</td><td>off | on; default: '''off'''</td><td>Select whether you want to save forwarded messages or not</td></tr><tr><td>Include sender's number</td><td>off | on; default: '''off'''</td><td>Enable/disable adding original message sender phone number at the end of message text</td></tr><tr><td>HTTPS certificate verification</td><td>Default: '''Ignore'''</td><td>Select whether to ignore or verify server certificate. Available options:
    <tr>
 
        <th>Field</th>
*'''Ignore'''
        <th>Value</th>
*'''Verify'''
        <th>Description</th>
</td></tr><tr><td>Method</td><td>Default: '''Get'''</td><td>Choose witch HTTP request method will be used. Available options:
    </tr>
 
    <tr>
*'''Get'''
        <td>Enable</td>
*'''Post'''
        <td>off | on; default: '''off'''</td>
</td></tr><tr><td>URL</td><td>Default: " "</td><td>URL to which message is going to be forwarded</td></tr><tr><td>Number value name</td><td>Default: " "</td><td>Sender phone number code name for query string name/value pair</td></tr><tr><td>Message value name</td><td>Default: " "</td><td>Message code name for query string name/value pair</td></tr><tr><td>Extra data pair 1</td><td>Default: " "</td><td>Extra html query name/value pair. Enter name to the left field and value to right</td></tr><tr><td>Extra data pair 2</td><td>Default: " "</td><td>Extra html query name/value pair. Enter name to the left field and value to right</td></tr><tr><td>Modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Mode</td><td>Default: '''All messages'''</td><td>Choose which messages are going to be forwarded. Available options:  
        <td>Enable/disable SMS forwarding to HTTP</td>
 
    </tr>
    <tr>
        <td>Forward SMS-Utilities rules</td>
        <td>off | on; default: '''off'''</td>
        <td>Enable/disable sms-utilities rules forwarding</td>
    </tr>
    <tr>
        <td>Don't save received message</td>
        <td>off | on; default: '''off'''</td>
        <td>Select whether you want to save forwarded messages or not</td>
    </tr>
    <tr>
        <td>Include sender's number</td>
        <td>off | on; default: '''off'''</td>
        <td>Enable/disable adding original message sender phone number at the end of message text</td>
    </tr>
    <tr>
        <td>HTTPS certificate verification</td>
        <td>Default: '''Ignore'''</td>
        <td>Select whether to ignore or verify server certificate. Available options:*'''Ignore'''*'''Verify'''
        </td>
    </tr>
    <tr>
        <td>Method</td>
        <td>Default: '''Get'''</td>
        <td>Choose witch HTTP request method will be used. Available options:*'''Get'''*'''Post'''
        </td>
    </tr>
    <tr>
        <td>URL</td>
        <td>Default: " "</td>
        <td>URL to which message is going to be forwarded</td>
    </tr>
    <tr>
        <td>Number value name</td>
        <td>Default: " "</td>
        <td>Sender phone number code name for query string name/value pair</td>
    </tr>
    <tr>
        <td>Message value name</td>
        <td>Default: " "</td>
        <td>Message code name for query string name/value pair</td>
    </tr>
    <tr>
        <td>Extra data pair 1</td>
        <td>Default: " "</td>
        <td>Extra html query name/value pair. Enter name to the left field and value to right</td>
    </tr>
    <tr>
        <td>Extra data pair 2</td>
        <td>Default: " "</td>
        <td>Extra html query name/value pair. Enter name to the left field and value to right</td>
    </tr>
    <tr>
        <td>Modem</td>
        <td>Default: '''Modem 1'''</td>
        <td>Which modem is used</td>
    </tr>
    <tr>
        <td>Mode</td>
        <td>Default: '''All messages'''</td>
        <td>Choose which messages are going to be forwarded. Available options:
*'''All messages'''
*'''All messages'''
*'''From listed numbers'''
*'''From listed numbers'''
*'''From user group'''
*'''From user group'''
        </td>
</td></tr></table>
    </tr>
</table>


====SMS Forwarding To SMS====
====SMS Forwarding To SMS====
Line 1,018: Line 294:
[[Image:Networking rutx manual mobile utilities sms to sms v1.png|border]]
[[Image:Networking rutx manual mobile utilities sms to sms v1.png|border]]


<table class="nd-mantable">
<table class="nd-mantable"><tr><th>Field</th><th>Value</th><th>Description</th></tr><tr><td>Enable</td><td>off | on; default: '''off'''</td><td>Enables/disables SMS forwarding to SMS
    <tr>
</td></tr><tr><td>Forward SMS-Utilities rules</td><td>off | on; default: '''off'''</td><td>Enable/disable sms-utilities rules forwarding</td></tr><tr><td>Don't save received message</td><td>off | on; default: '''off'''</td><td>Select whether you want to save forwarded messages or not</td></tr><tr><td>Add sender's number</td><td>off | on; default: '''off'''</td><td>Enable/disable adding original message sender phone number at the end of message text. Only added if total message length is up to 480 characters</td></tr><tr><td>Modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Gateway modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Mode</td><td>Default: '''All messages'''</td><td>Choose which messages are going to be forwarded. Available options:  
        <th>Field</th>
 
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off | on; default: '''off'''</td>
        <td>Enables/disables SMS forwarding to SMS
        </td>
    </tr>
    <tr>
        <td>Forward SMS-Utilities rules</td>
        <td>off | on; default: '''off'''</td>
        <td>Enable/disable sms-utilities rules forwarding</td>
    </tr>
    <tr>
        <td>Don't save received message</td>
        <td>off | on; default: '''off'''</td>
        <td>Select whether you want to save forwarded messages or not</td>
    </tr>
    <tr>
        <td>Add sender's number</td>
        <td>off | on; default: '''off'''</td>
        <td>Enable/disable adding original message sender phone number at the end of message text. Only added if total
            message length is up to 480 characters</td>
    </tr>
    <tr>
        <td>Modem</td>
        <td>Default: '''Modem 1'''</td>
        <td>Which modem is used</td>
    </tr>
    <tr>
        <td>Gateway modem</td>
        <td>Default: '''Modem 1'''</td>
        <td>Which modem is used</td>
    </tr>
    <tr>
        <td>Mode</td>
        <td>Default: '''All messages'''</td>
        <td>Choose which messages are going to be forwarded. Available options:
*'''All messages'''
*'''All messages'''
*'''From listed numbers'''
*'''From listed numbers'''
*'''From user group'''
*'''From user group'''
        </td>
</td></tr><tr><td>Recipients phone numbers</td><td>Default: " "</td><td>Number(s) to which received messages will be forwarded to</td></tr></table>
    </tr>
    <tr>
        <td>Recipients phone numbers</td>
        <td>Default: " "</td>
        <td>Number(s) to which received messages will be forwarded to</td>
    </tr>
</table>


====SMS Forwarding To Email====
====SMS Forwarding To Email====
Line 1,078: Line 308:
[[Image:Networking rutx manual mobile utilities sms to email v1.png|border]]
[[Image:Networking rutx manual mobile utilities sms to email v1.png|border]]


<table class="nd-mantable">
<table class="nd-mantable"><tr><th>Field</th><th>Value</th><th>Description</th></tr><tr><td>Enable</td><td>off | on; default: '''off'''</td><td>Enables/disables SMS forwarding to Email
    <tr>
</td></tr><tr><td>Forward SMS-Utilities rules</td><td>off | on; default: '''off'''</td><td>Enables/disables sms-utilities rules forwarding</td></tr><tr><td>Don't save received message</td><td>off | on; default: '''off'''</td><td>Select whether you want to save forwarded messages or not</td></tr><tr><td>Add sender's number</td><td>off | on; default: '''off'''</td><td>Enable/disable adding sender phone number at the end of email text body</td></tr><tr><td>Subject</td><td>Default: " "</td><td>Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</td></tr><tr><td>Email group</td><td>Default: " "</td><td>Sender's email configuration</td></tr><tr><td>Recipient's email address</td><td>Default: " "</td><td>For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-)</td></tr><tr><td>Modem</td><td>Default: '''Modem 1'''</td><td>Which modem is used</td></tr><tr><td>Mode</td><td>Default: '''All messages'''</td><td>Choose which messages are going to be forwarded. Available options:  
        <th>Field</th>
 
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Enable</td>
        <td>off | on; default: '''off'''</td>
        <td>Enables/disables SMS forwarding to Email
        </td>
    </tr>
    <tr>
        <td>Forward SMS-Utilities rules</td>
        <td>off | on; default: '''off'''</td>
        <td>Enables/disables sms-utilities rules forwarding</td>
    </tr>
    <tr>
        <td>Don't save received message</td>
        <td>off | on; default: '''off'''</td>
        <td>Select whether you want to save forwarded messages or not</td>
    </tr>
    <tr>
        <td>Add sender's number</td>
        <td>off | on; default: '''off'''</td>
        <td>Enable/disable adding sender phone number at the end of email text body</td>
    </tr>
    <tr>
        <td>Subject</td>
        <td>Default: " "</td>
        <td>Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )</td>
    </tr>
    <tr>
        <td>Email group</td>
        <td>Default: " "</td>
        <td>Sender's email configuration</td>
    </tr>
    <tr>
        <td>Recipient's email address</td>
        <td>Default: " "</td>
        <td>For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-)</td>
    </tr>
    <tr>
        <td>Modem</td>
        <td>Default: '''Modem 1'''</td>
        <td>Which modem is used</td>
    </tr>
    <tr>
        <td>Mode</td>
        <td>Default: '''All messages'''</td>
        <td>Choose which messages are going to be forwarded. Available options:
*'''All messages'''
*'''All messages'''
*'''From listed numbers'''
*'''From listed numbers'''
*'''From user group'''
*'''From user group'''
        </td>
</td></tr></table>
    </tr>
</table>


==Call Utilities==
==Call Utilities==


Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from
Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.  
your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that
in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.


===Call Configuration===
===Call Configuration===
----
----
To make a new rule, select what '''Action''' you want to make and press '''Add''' button.
To make a new rule, select what '''Action''' you want to make and press '''Add''' button.  


[[File:Networking trb manual mobile utilities new call rule.png|border]]
[[File:Networking trb manual mobile utilities new call rule.png|border]]


Every Call rule can be edited to your liking, just click the '''Edit''' button. This guide will contain information on
Every Call rule can be edited to your liking, just click the '''Edit''' button. This guide will contain information on editing every single Call Utilities rule.
editing every single Call Utilities rule.
 
[[File:Networking trb manual mobile utilities edit call rule 1.png|border]]


'''Call Configuration''' window is similar to '''SMS Configuration''', but less complex.
[[File:Networking trb manual mobile utilities edit call rule 1.png|border]]


'''Call Configuration''' window is similar to '''SMS Configuration''', but less complex.
[[File:Networking rutx manual mobile utilities edit call rule v1.png|border|1106x1106px]]
[[File:Networking rutx manual mobile utilities edit call rule v1.png|border|1106x1106px]]


Line 1,162: Line 339:


====Reboot====
====Reboot====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable call Reboot function</td><td>Allows router to restart after receiving a call</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Reboots the router</td></tr><tr><td>Get status via SMS after reboot</td><td>Check this to receive connection status via SMS after the reboot</td><td>If enabled, the router will send a status message once it has rebooted and is operational again. This is an option under the Call Reboot rule
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Gateway modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS</td><td>You can select which status elements to display</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
|-
From all numbers | From group | From single number; Default: '''From all numbers'''
| Enable || This will enable or disable call Reboot function || Allows router to restart after receiving a call
</td></table>
|-
| Action || The action to be performed when this rule is met || Reboots the router
|-
| Get status via SMS after reboot || Check this to receive connection status via SMS after the reboot || If enabled, the router will send a status message once it has rebooted and is operational again. This is an option under the Call Reboot rule
|-
| Modem || Select which modem you want to use || Which modem is configured
|-
| Gateway modem || Select which modem you want to use || Which modem is configured
|-
| Message text || Which status information should be included in SMS || You can select which status elements to display
|-
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
|}


====Send status====
====Send status====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable call to receive status function</td><td>Allows you to get the router‘s status via SMS after calling it. This is both a separate Call Rule and an option under the Call Reboot rule</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Sends an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Gateway modem</td><td>Select which modem you want to use</td><td>Which modem is configured</td></tr><tr><td>Message text</td><td>Which status information should be included in SMS</td><td>You can select which status elements to display</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
From all numbers | From group | From single number; Default: '''From all numbers'''
|-
</td></table>
| Enable || This will enable or disable call to receive status function || Allows you to get the router‘s status via SMS after calling it. This is both a separate Call Rule and an option under the Call Reboot rule
|-
| Action || The action to be performed when this rule is met || Sends an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
|-
| Modem || Select which modem you want to use || Which modem is configured
|-
| Gateway modem || Select which modem you want to use || Which modem is configured
|-
| Message text || Which status information should be included in SMS || You can select which status elements to display
|-
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
|}


====Switch mobile data====
====Switch mobile data====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable call to switch mobile data ON/OFF</td><td>Allows mobile data control via call</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Turn mobile data ON/OFF</td></tr><tr><td>State</td><td>The state to which mobile data will be set when this rule is met.</td><td>If you set is as ON it will turn on mobile data if OFF it will turn it off.</td></tr><tr><td>Modem</td><td>Select which modem you want to use</td><td>Which modem is configured
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
|-
From all numbers | From group | From single number; Default: '''From all numbers'''
| Enable || This will enable or disable call to switch mobile data ON/OFF || Allows mobile data control via call
</td></table>
|-
| Action || The action to be performed when this rule is met || Turn mobile data ON/OFF
|-
| State || The state to which mobile data will be set when this rule is met. || If you set is as ON it will turn on mobile data if OFF it will turn it off.
|-
| Modem || Select which modem you want to use || Which modem is configured      
|-
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
|}


====Switch output====
====Switch output====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<table class="nd-mantable"><tr><th>FIELD NAME</th><th>DESCRIPTION</th><th>EXPLANATION, NOTES</th></tr><tr><td>Enable</td><td>This will enable or disable call to switch output ON/OFF</td><td>Allows output state control via call</td></tr><tr><td>Action</td><td>The action to be performed when this rule is met</td><td>Change output state</td></tr><tr><td>State</td><td>The state to which output will be set when this rule is met</td><td>If you set it as ON it will turn on output if OFF it will turn it off</td></tr><tr><td>Active timeout</td><td>Rule active for a specified time</td><td>If enabled, you can set specific time for how long you want to change output state
|-
</td></tr><tr><td>Seconds</td><td>Rule active for a specified time, format seconds</td><td>Write time, for how long you want to change output state
| Enable || This will enable or disable call to switch output ON/OFF || Allows output state control via call
</td></tr><tr><td>Output type</td><td>Type of output which will be activated</td><td>Select which output you want to use</td></tr><tr><td>Allowed users</td><td>White list of allowed users</td><td>Possible values:
|-
From all numbers | From group | From single number; Default: '''From all numbers'''
| Action || The action to be performed when this rule is met || Change output state
</td></table>
|-
| State || The state to which output will be set when this rule is met || If you set it as ON it will turn on output if OFF it will turn it off
|-
| Active timeout || Rule active for a specified time || If enabled, you can set specific time for how long you want to change output state    
|-
| Seconds || Rule active for a specified time, format seconds || Write time, for how long you want to change output state      
|-
| Output type || Type of output which will be activated || Select which output you want to use
|-
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
|}


==Messages==
==Messages==
Line 1,237: Line 369:
===Read SMS===
===Read SMS===
----
----
In the '''Read SMS''' tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of
In the '''Read SMS''' tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should be visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.
received SMS messages and you can choose how many entries of that list should be visible at one time with SMS per page
drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through
the list of messages in the top right corner of the page.


[[Image:Networking trb manual mobile utilities read sms v1.png|border]]
[[Image:Networking trb manual mobile utilities read sms v1.png|border]]
Line 1,252: Line 381:
All you have to do is enter the recipient’s phone number, type in your message and hit the '''Send''' button.
All you have to do is enter the recipient’s phone number, type in your message and hit the '''Send''' button.


 
<br />
===Storage===
===Storage===
----
----
Line 1,258: Line 387:
In the Storage tab you can find settings associated with message storage.
In the Storage tab you can find settings associated with message storage.


[[Image:Networking rutx manual mobile utilities storage v1.png|border|1136x1136px]]
[[Image:Networking rutx manual mobile utilities storage v1.png|border|1136x1136px]]<br /><table class="nd-mantable"><tr><th>Field</th><th>Value</th><th>Description</th></tr><tr><td>Save messages on SIM</td><td>off | on; default: '''on'''</td><td>If this is enabled, messages from SIM card will not be removed after they have been read</td></tr><tr><td>Delete forwarded messages</td><td>off | on; default: '''off'''</td><td>If enabled, all forwarded messages will be automatically deleted</td></tr><tr><td>Modem</td><td>Default: " "</td><td>Which modem is configured</td></tr><tr><td>Sim card memory</td><td> -</td><td>Information about used/available SIM card memory</td></tr><tr><td>Leave free space</td><td>Default: '''5'''</td><td>How much memory (number of messages) should be left free</td></tr></table>
 
<table class="nd-mantable">
    <tr>
        <th>Field</th>
        <th>Value</th>
        <th>Description</th>
    </tr>
    <tr>
        <td>Save messages on SIM</td>
        <td>off | on; default: '''on'''</td>
        <td>If this is enabled, messages from SIM card will not be removed after they have been read</td>
    </tr>
    <tr>
        <td>Delete forwarded messages</td>
        <td>off | on; default: '''off'''</td>
        <td>If enabled, all forwarded messages will be automatically deleted</td>
    </tr>
    <tr>
        <td>Modem</td>
        <td>Default: " "</td>
        <td>Which modem is configured</td>
    </tr>
    <tr>
        <td>Sim card memory</td>
        <td> -</td>
        <td>Information about used/available SIM card memory</td>
    </tr>
    <tr>
        <td>Leave free space</td>
        <td>Default: '''5'''</td>
        <td>How much memory (number of messages) should be left free</td>
    </tr>
</table>




[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]

Revision as of 11:00, 15 May 2020

Summary

{{{name}}} routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.

SMS Utilities

Default Rules

The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.

The entire list contains 17 rules but you are also be provided with the possibility to configure custom ones or edit the existing rules.

All default configuration options are listed below:

  • Reboot
  • Send_status
  • Mobile (on)
  • Mobile (off)
  • SSH_access (on)
  • SSH_access (off)
  • Web_access (on)
  • Web_access (off)
  • Firstboot
  • Switch SIM
  • GPS coordinates
  • GPS (off)
  • GPS (on)
  • Fw_upgrade
  • Monitoring (on)
  • Monitoring (off)
  • Uci

Execution

To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text “reboot”, the router will reboot if the selected Authorization method is “No authorization”. However, if there is an Authorization method present you will need to include the “Authorization key” in the text message. This “Authorization key” depends on the chosen Authorization method, i.e., if the method is “By serial”, the “Authorization key” is the router’s serial number, if the method is “By router admin password”, the “Authorization key” is the router’s admin password.

The "Authorization key” must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is “By router admin password” and the password is “admin01”, the entire message should look like this: “admin01 reboot”. The same applies to “By serial” authorization. By default authorization for SMS utilities are set "By router admin password".

Rule Overview and editing

Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the Edit button next to any SMS Utilities rules. This guide will contain information on editing every single SMS Utilities rule.

SMS rule General settings

SMS rule Authorization settings

File:Networking trb manual mobile utilities reboot Authorization settings v1.png

Above is an example of what SMS Configuration General and Authorization settings windows looks like, specifically, SMS Configuration for the Reboot rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

Reboot

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable SMS reboot functionAllows router to restart via SMS
ActionThe action to be performed when this rule is metReboots the router
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Get status via SMS after rebootCheck this to receive connection status via SMS after the rebootIf enabled, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule
ModemSelect which modem you want to useWhich modem is configured
Gateway modemSelect which modem you want to useWhich modem is configured
Message textWhich status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available You can select which status elements to display
Authorization methodWhat kind of authorization to usePossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Send status

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable SMS status functionAllows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
ActionThe action to be performed when this rule is metReturns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
ModemSelect which modem you want to useWhich modem is configured
Gateway modemSelect which modem you want to useWhich modem is configured
Message textWhich status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available You can select which status elements to display
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Switch mobile data ON/OFF

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the Switch mobile data functionAllows mobile control via SMS
ActionThe action to be performed when this rule is metTurn mobile data ON or OFF
StateThe state to which mobile data will be set when this rule is met.If you set it as ON it will turn on mobile data if OFF it will turn it off.
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
ModemSelect which modem you want to useWhich modem is configured
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

SSH access control

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the SSH access control functionAllows SSH access control via SMS
ActionThe action to be performed when this rule is metTurns SSH access ON or OFF
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Enable SSH accessEnables or Disables SSH access from LANIf this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
Enable remote SSH accessEnables or Disables SSH access from WANIf this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Web access Control

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the Web access control functionAllows Web access control via SMS
ActionThe action to be performed when this rule is metTurns access to WebUI ON or OFF
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Enable HTTP accessEnables or Disables HTTP access from LANIf this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
Enable HTTPS accessEnables or Disables HTTPS access from LANIf this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN
Enable remote HTTP accessEnables or Disables HTTP access from WANIf this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
Enable remote HTTPS accessEnables or Disables HTTPs access from WANIf this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Restore to default

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the Restore to default functionAllows you to restore the router to it's default settings via SMS
ActionThe action to be performed when this rule is metExecutes a router reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

FW upgrade from server

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the FW upgrade from server functionAllows you to upgrade the router‘s FW via SMS
ActionThe action to be performed when this rule is metUpgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Digital output control

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the possibility to change output stateAllows you to change output state via SMS
ActionThe action to be performed when this rule is metChanges output state
StateThe state to which output will be set when this rule is metIf you set it as ON it will turn on output if OFF it will turn it off
Active timeoutRule active for a specified timeIf enabled, you can set specific time for how long you want to change output state
SecondsRule active for a specified time, format secondsWrite time, for how long you want to change output state
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Output typeType of output which will be activatedSelect which output you want to use
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Force SIM switch

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the Force SIM switch functionAllows SIM switch via SMS
ActionThe action to be performed when this rule is metForces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the message)
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
ModemSelect which modem you want to useWhich modem is configured
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

GPS control

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis check box will enable or disable the GPS ON/OFF functionAllows you to control GPS via SMS
ActionThe action to be performed when this rule is metTurns GPS ON or OFF
StateThe state to which GPS will be set when this rule is metIf you set it as ON it will turn on GPS if OFF it will turn it off
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

GPS coordinates

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the GPS coordinates functionAllows you to get GPS coordinates via SMS
ActionThe action to be performed when this rule is metSends you GPS coordinates of the router
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
ModemSelect which modem you want to useWhich modem is configured
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Monitoring control

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the Monitoring control functionAllows you to control RMS monitoring status via SMS
ActionThe action to be performed when this rule is metTurns RMS monitoring ON or OFF
StateThe state to which RMS monitoring will be set when this rule is metIf you set is as ON it will turn on RMS monitoring if OFF it will turn it off
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Wake on LAN

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the Wake on LAN functionProvides the possibility to wake computers from sleep mode
ActionThe action to be performed when this rule is metWakes the specified computer from sleep mode
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
MAC addressComputer's MAC AddressA MAC address of a device you want to wake up
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Mobile data limit status

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the mobile data limit status functionAllows you to get mobile data limit status via SMS
ActionThe action to be performed when this rule is metSends you mobile data limit status
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
ModemSelect which modem you want to useWhich modem is configured
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

UCI API rule

The UCI rule lets you set or get any parameter from the router's configuration files.

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable the UCI API functionAllows you to set or get any configurations from the router
ActionThe action to be performed when this rule is met.Sets or sends you any specified configurations of the router
SMS textSMS text that will trigger the ruleSMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

Detailed explanations on how to use this function are presented in the table below

ModemSelect which modem you want to useWhich modem is configured
Authorization methodWhat kind of authorization to use for SIM managementPossible values:

No authorization | By serial | By router admin password; Default: By router admin password

Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

The following are syntax examples for the UCI API rule:

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
uci get config.section.option"Returns config option valueuci get network.wan.ipaddr - returns the router's WAN IP address
uci set config.section.option="value"Sets config option"uci set network.mobile.apn=example" - Changes mobile APN to example
uci show configReturns the contents of a config fileuci show openvpn - returns the contents of the openvpn config file
uci show config.sectionReturns the exact part of a config file (either section or the exact option value)uci show network.ppp - returns the contents of the ppp interface section from the network config file

As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our UCI command usage article.

Custom Rules

If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the Add Rule tab. Write SMS text, select an Action and press the Add button located next to it.

File:Networking trb manual mobile utilities add rule v1.png

Configuring a new rule is very similar to editing default rules: you are provided with a list of Actions, other fields are generated in accordance with which Action you choose.

SMS Gateway

This section is a summary of the SMS Gateway function in {{{name}}} routers.

Post/Get

Post/Get allows you to perform action requests by writing them in the URL after your device’s IP address.

FieldValueDescription
Enableoff | on; default: offEnable SMS management functionality through POST/GET
ModemDefault: Modem 1Which modem is used
Gateway modemDefault: Modem 1Which modem is used
User nameDefault: user1User name used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
PasswordDefault: user_passPassword used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )

Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:

Action Post/get URL examples
View mobile messages list http://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass
Read mobile message http://192.168.1.1/cgi-bin/sms_read?username=user1&password=user_pass&number=1
Send mobile message http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
View mobile messages total http://192.168.1.1/cgi-bin/sms_total?username=user1&password=user_pass
Delete mobile message http://192.168.1.1/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
  • 192.168.1.1 - router's IP address. (Replace it with your [[{{{name}}}_LAN#General_Setup|LAN IP]] or [[{{{name}}}_WAN#Operation_Modes|WAN IP]] (when connecting remotely))
  • SMS related post/get commands. Possible values are:
    • sms_list - view all SMS messages in storage
    • sms_read - read a single SMS message by specified SMS index (number)
    • sms_send - send an SMS message to specified recipient
    • sms_total - display SMS storage statistics
    • sms_delete - delete a single SMS message by specified SMS index (number)
  • & - separation symbol. After specifying the SMS command, other parameters must be separated by an ampersand (&) symbol
  • username - SMS post/get configuration user name
  • password - SMS post/get configuration password
  • number - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be viewed with the sms_list command.
    Correct phone number format is:
    • 00 - number must be preceded by two zeros
    • <country_code> - the next following element is the number holder's country code
    • <receivers_number> - phone number of the recipient

    For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's phone number, all preceded by 00)

  • text - SMS message text

Auto Reply

Auto reply allows you to configure automatic replying to SMS messages that the router receives.

FieldValueDescription
Enableoff | on; default: offToggles Auto Reply ON or OFF
Reply SMS-Utilities rulesoff | on; default: offIt will reply to sms rules, from SMS-Utilities
Don't save received messagesoff | on; default: offIf enabled, the router will delete received SMS messages
ModemDefault: Modem 1Which modem is used
Gateway modemDefault: Modem 1Which modem is used
ModeDefault: EveryoneSpecifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From user group
Message textDefault: " "The message that will be sent in reply

SMS Forwarding

This section is a summary of the SMS Forwarding function in {{{name}}} routers.

SMS Forwarding To HTTP

The SMS Forwarding To HTTP functionality forwards SMS messages to HTTP, using either POST or GET methods.

FieldValueDescription
Enableoff | on; default: offEnable/disable SMS forwarding to HTTP
Forward SMS-Utilities rulesoff | on; default: offEnable/disable sms-utilities rules forwarding
Don't save received messageoff | on; default: offSelect whether you want to save forwarded messages or not
Include sender's numberoff | on; default: offEnable/disable adding original message sender phone number at the end of message text
HTTPS certificate verificationDefault: IgnoreSelect whether to ignore or verify server certificate. Available options:
  • Ignore
  • Verify
MethodDefault: GetChoose witch HTTP request method will be used. Available options:
  • Get
  • Post
URLDefault: " "URL to which message is going to be forwarded
Number value nameDefault: " "Sender phone number code name for query string name/value pair
Message value nameDefault: " "Message code name for query string name/value pair
Extra data pair 1Default: " "Extra html query name/value pair. Enter name to the left field and value to right
Extra data pair 2Default: " "Extra html query name/value pair. Enter name to the left field and value to right
ModemDefault: Modem 1Which modem is used
ModeDefault: All messagesChoose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group

SMS Forwarding To SMS

The SMS Forwarding To SMS function forwards SMS messages to one or several recipients.

FieldValueDescription
Enableoff | on; default: offEnables/disables SMS forwarding to SMS
Forward SMS-Utilities rulesoff | on; default: offEnable/disable sms-utilities rules forwarding
Don't save received messageoff | on; default: offSelect whether you want to save forwarded messages or not
Add sender's numberoff | on; default: offEnable/disable adding original message sender phone number at the end of message text. Only added if total message length is up to 480 characters
ModemDefault: Modem 1Which modem is used
Gateway modemDefault: Modem 1Which modem is used
ModeDefault: All messagesChoose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group
Recipients phone numbersDefault: " "Number(s) to which received messages will be forwarded to

SMS Forwarding To Email

The SMS Forwarding To Email function forwards SMS messages to email.

FieldValueDescription
Enableoff | on; default: offEnables/disables SMS forwarding to Email
Forward SMS-Utilities rulesoff | on; default: offEnables/disables sms-utilities rules forwarding
Don't save received messageoff | on; default: offSelect whether you want to save forwarded messages or not
Add sender's numberoff | on; default: offEnable/disable adding sender phone number at the end of email text body
SubjectDefault: " "Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
Email groupDefault: " "Sender's email configuration
Recipient's email addressDefault: " "For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-)
ModemDefault: Modem 1Which modem is used
ModeDefault: All messagesChoose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group

Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

Call Configuration

To make a new rule, select what Action you want to make and press Add button.

Every Call rule can be edited to your liking, just click the Edit button. This guide will contain information on editing every single Call Utilities rule.

File:Networking trb manual mobile utilities edit call rule 1.png

Call Configuration window is similar to SMS Configuration, but less complex.

Call Configuration also has similar Authorization settings.

File:Networking trb manual mobile utilities edit call rule auth.png

Reboot

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable call Reboot functionAllows router to restart after receiving a call
ActionThe action to be performed when this rule is metReboots the router
Get status via SMS after rebootCheck this to receive connection status via SMS after the rebootIf enabled, the router will send a status message once it has rebooted and is operational again. This is an option under the Call Reboot rule
ModemSelect which modem you want to useWhich modem is configured
Gateway modemSelect which modem you want to useWhich modem is configured
Message textWhich status information should be included in SMSYou can select which status elements to display
Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Send status

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable call to receive status functionAllows you to get the router‘s status via SMS after calling it. This is both a separate Call Rule and an option under the Call Reboot rule
ActionThe action to be performed when this rule is metSends an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
ModemSelect which modem you want to useWhich modem is configured
Gateway modemSelect which modem you want to useWhich modem is configured
Message textWhich status information should be included in SMSYou can select which status elements to display
Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Switch mobile data

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable call to switch mobile data ON/OFFAllows mobile data control via call
ActionThe action to be performed when this rule is metTurn mobile data ON/OFF
StateThe state to which mobile data will be set when this rule is met.If you set is as ON it will turn on mobile data if OFF it will turn it off.
ModemSelect which modem you want to useWhich modem is configured
Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Switch output

FIELD NAMEDESCRIPTIONEXPLANATION, NOTES
EnableThis will enable or disable call to switch output ON/OFFAllows output state control via call
ActionThe action to be performed when this rule is metChange output state
StateThe state to which output will be set when this rule is metIf you set it as ON it will turn on output if OFF it will turn it off
Active timeoutRule active for a specified timeIf enabled, you can set specific time for how long you want to change output state
SecondsRule active for a specified time, format secondsWrite time, for how long you want to change output state
Output typeType of output which will be activatedSelect which output you want to use
Allowed usersWhite list of allowed usersPossible values:

From all numbers | From group | From single number; Default: From all numbers

Messages

With the help of the Messages window you can read and send SMS messages.

Read SMS

In the Read SMS tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should be visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.

File:Networking trb manual mobile utilities read sms v1.png

Send Messages

The Send Messages tab let's you send SMS messages from the router‘s SIM card.

File:Networking trb manual mobile utilities send sms v1.png

All you have to do is enter the recipient’s phone number, type in your message and hit the Send button.


Storage

In the Storage tab you can find settings associated with message storage.


FieldValueDescription
Save messages on SIMoff | on; default: onIf this is enabled, messages from SIM card will not be removed after they have been read
Delete forwarded messagesoff | on; default: offIf enabled, all forwarded messages will be automatically deleted
ModemDefault: " "Which modem is configured
Sim card memory -Information about used/available SIM card memory
Leave free spaceDefault: 5How much memory (number of messages) should be left free


[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_mobile_utilities&oldid=62536"