RUT300 Remote Monitoring & Administration

RUT300 supports multiple monitoring and administration possibilities.

Remote control options

The RUT300 router supports the following remote control capabilities:

Remote control method	Can get parameters	Can set parameters
RMS
SSH
HTTP
VPN
TR-069

RMS

---

The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the System → Administration → RMS page.

Public IP

---

If your device has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access

---

Remote HTTP access can be set up via the System → Administration → Access Control page.

SSH access

---

Remote SSH access can be set up via the System → Administration → Access Control page.

VPN

---

Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by RUT300, visit the VPN manual page.

TR-069

---

Technical Report 069 (TR-069) is a technical specification of the Broadband Forum that defines an application layer protocol for remote management of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. For more information on TR-069 in RUT300, visit the TR-069 manual page