Ironwifi.com Hotspot Configuration on Legacy firmware

Summary

This chapter is a guide on configuring ironwifi.com provider hotspot instance on RUT routers.

Step 1: ironwifi.com configuration

Login screen

---

We need to login into console.ironwifi.com/login system using our credentials. If you don't have a registered account then you need to create one. You can do that by clicking Create Account.

Create new network

---

In the opened browser window click Networks

Click New Network

Type name of new network and select region

Click Create network

Click on your created network

Network details

Here are the data that we will need in the next step:

Radius ip Address : 130.211.107.8

Authentication Port : 6375

Accounting Port  : 6376

Shared Secret  : goDkt2Abuv74PQ0

! Replace all these (4) values from the ones in your IronWifi account. These values are user-specific. !

Create new user

Click Users

Click New User

Type Username and click Create User

Click on your user

Set new password and click ENTER

Step 2: Router configuration

Now we need to open our RUT homepage. You can access the website by entering 192.168.1.1 in your internet browser's URL bar.

Open the hotspot configuration panel by clicking Services → Hotspot

Click Edit

Use configuration details from Step 1.

Check enable and Terms of service box

Select External radius from Authentication mode dropbox

Type configuration details RADIUS Server, Authentication port, Accounting port and Radius secret key

Click save

Wait up to 5 minutes from the time you saved the changes.

Test your hotspot

Try connecting to your router using computer or mobile phone.

Select your router.

Type your username and password.

Click Login

You should see a message Authorization Successful

See also

ironwifi.com

Ironwifi.com Hotspot Configuration on RutOS firmware