Line 129: |
Line 129: |
| In order to setup the following configuration SIM card is required. | | In order to setup the following configuration SIM card is required. |
| | | |
− | Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Slave alarms'''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''. | + | Go back to '''Services > Modbus > Modbus Serial Master''' and press edit the same Slave configuration or create a new one. There will be section called '''Alarms Configuration''. Create a name, then press '''Add''' button. When it appears like in the example, press '''Edit'''. |
| | | |
− | [[File:Networking_rut955_configuration_modbus_serial_14_v1.png|border|class=tlt-border]] | + | [[File:Modbus serial rut955 12.png|border|class=tlt-border|1100x700px]] |
| | | |
| Then apply the following configuration: | | Then apply the following configuration: |
| | | |
− | [[File:Networking_rut955_configuration_modbus_serial_15_v1.png|border|class=tlt-border]] | + | [[File:Modbus serial rut955 13.png|border|class=tlt-border|1100x700px]] |
| | | |
| # '''Enable''' instance. | | # '''Enable''' instance. |
Line 141: |
Line 141: |
| # Write '''Register''' (1). | | # Write '''Register''' (1). |
| # Select '''Condition''' (More than). | | # Select '''Condition''' (More than). |
− | # Write '''Value''' (5). | + | # Write '''Value''' (10). |
| + | # Select '''Action frequency''' (First trigger) |
| # Select '''Action''' (SMS). | | # Select '''Action''' (SMS). |
| + | # Create '''Message''' (type anything you want to receive). |
| # Write '''Phone number''' (the number you want to receive the messages to). | | # Write '''Phone number''' (the number you want to receive the messages to). |
− | # Create '''Message''' (type anything you want to receive).
| |
| # Press '''Save'''. | | # Press '''Save'''. |
| | | |
| Now go back to '''Modbus slave simulator''' and edit this window: | | Now go back to '''Modbus slave simulator''' and edit this window: |
| | | |
− | [[File:Networking_rut955_configuration_modbus_serial_16_v1.png|border|class=tlt-border]] | + | [[File:Modbus serial rut955 14.png|border|class=tlt-border|1100x700px]] |
| | | |
− | Change the value to anything below 5, you should not receive messages. Then change the value to anything above 5, you should start receiving messages. | + | Change the value to anything below 10, you should not receive messages. Then change the value to anything above 10, you should start receiving messages. |