TRB141 1-Wire Setup/Configuration: Difference between revisions
| Line 3: | Line 3: | ||
==Introduction== | ==Introduction== | ||
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with '''TRB141'''. | Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. | ||
In this chapter, we will set up and configure the 1-Wire sensor with '''TRB141'''. | |||
== Prerequisites == | == Prerequisites == | ||
Revision as of 10:27, 8 March 2023
The information on this page is updated in accordance with 00.07.04 firmware version.
Introduction
Inputs and outputs are used for monitoring and controlling a connected device or receiving signals from that device in order to trigger certain events. In this chapter, we will set up and configure the 1-Wire sensor with TRB141.
Prerequisites
- TRB141
- 1-Wire sensor
- If 1-Wire doesn't have it's own Wires(Like Dallas DS1820 used in this example) you will need additional wires to connect sensor to TRB141