Domnev: Difference between revisions
No edit summary |
No edit summary |
||
| Line 174: | Line 174: | ||
==Testing configuration== | ==Testing configuration== | ||
After we establish the tunnel, we may observe the following information: | After we establish the tunnel, we may observe the following information: | ||
===RUT1 ( | ===RUT1 (Hub) side=== | ||
---- | ---- | ||
<pre>ipsec status all</pre> | |||
<pre> | <pre> | ||
| Line 236: | Line 236: | ||
</pre> | </pre> | ||
===RUT2 ( | ===RUT2 (Spoke) side=== | ||
---- | ---- | ||
Revision as of 13:21, 21 March 2023
The information in this page is updated in accordance with 00.07.4 firmware version .
Introduction
Configuration overview and prerequisites
Before we begin, let's take a look at the configuration that we are attempting to achieve and the prerequisites that make it possible.
Prerequisites:
- Two RUT/RUTX series routers with RUTOS firmware;
- An end device (PC, Laptop) for configuration;
If you're having trouble finding any page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode," which is located at the top-right corner of the WebUI.
Topology
RUT1 - RUTX11 as a hub. It will be our "default gateway" for spoke device. RUTX11 has a LAN subnet of 192.168.11.0/24 configured on it, which should be reachable by the spoke.
RUT2 - RUT955 as a spoke. It will be connecting to a hub for basic internet access. RUT955 has a lan subnet of 192.168.9.0/24 configured on it, which should be reachable by the hub.
RUT1 (Hub) configuration
Start by configuring HUB (RUT1) device. Login to the WebUI, navigate to Services → VPN → IPsec and add a new IPsec instance. Configure everything as follows.
Note: Not specified fields can be left as-is or changed according to your needs.
Instance configuration
 |
|
|---|---|
|
Connection configuration
 |
|
|---|---|
|
 |
|
|---|---|
|
Proposal configuration
 |
|
|---|---|
|
 |
|
|---|---|
|
RUT2 (Spoke) configuration
Login to the RUT2 WebUI, navigate to Services → VPN → IPsec and add a new IPsec instance. Configure everything as follows.
Instance configuration
 |
|
|---|---|
|
Connection configuration
 |
|
|---|---|
|
Proposalconfiguration
|
|
|---|---|
|
|
|
|---|---|
|
Testing configuration
After we establish the tunnel, we may observe the following information:
RUT1 (Hub) side
ipsec status all
root@Teltonika-RUTX12:~# ipsec statusall
Status of IKE charon daemon (strongSwan 5.9.2, Linux 5.4.231, armv7l):
uptime: 74 minutes, since Mar 21 08:52:39 2023
worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 2
loaded plugins: charon aes des sha2 sha1 md4 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp pem openssl gmp xcbc hmac kernel-netlink socket-default stroke vici updown eap-identity eap-mschapv2 xauth-generic
Virtual IP pools (size/online/offline):
10.20.30.0/24: 254/1/0
Listening IP addresses:
84.xxx.xxx.xxx
192.168.11.1
fd93:51e6:6fe8::1
Connections:
HUB-HUB_c: %any...%any IKEv2
HUB-HUB_c: local: uses pre-shared key authentication
HUB-HUB_c: remote: uses pre-shared key authentication
HUB-HUB_c: child: 0.0.0.0/0 === dynamic TUNNEL
Security Associations (1 up, 0 connecting):
HUB-HUB_c[2]: ESTABLISHED 74 minutes ago, 84.xxx.xxx.xxx[84.xxx.xxx.xxx]...88.xxx.xxx.xxx[192.168.86.197]
HUB-HUB_c[2]: IKEv2 SPIs: ded11f31c20352dc_i 58ebc8d96264c21e_r*, pre-shared key reauthentication in 89 minutes
HUB-HUB_c[2]: IKE proposal: AES_CBC_256/HMAC_SHA2_512_256/PRF_HMAC_SHA2_512/ECP_521
HUB-HUB_c{3}: INSTALLED, TUNNEL, reqid 1, ESP in UDP SPIs: c27cb140_i c7382615_o
HUB-HUB_c{3}: AES_CBC_128/HMAC_SHA2_256_128/ECP_521, 215536 bytes_i (1981 pkts, 1s ago), 126021 bytes_o (499 pkts, 1s ago), rekeying in 14 minutes
HUB-HUB_c{3}: 0.0.0.0/0 === 10.20.30.1/32
/tmp/ipsec/ipsec.conf
command output:
root@Teltonika-RUTX12:~# cat /tmp/ipsec/ipsec.conf # generated by /etc/init.d/ipsec version 2 conn HUB-HUB_c left=%any right=%any leftfirewall=yes rightfirewall=no ikelifetime=3h lifetime=1h margintime=9m keyingtries=3 dpdaction=none dpddelay=30s dpdtimeout=90s leftauth=psk rightauth=psk rightsourceip=10.20.30.0/24 auto=start leftsubnet=0.0.0.0/0 rightdns=9.9.9.9 aggressive=no forceencaps=no type=tunnel keyexchange=ikev2 esp=aes128-sha256-ecp521! ike=aes256-sha512-ecp521!
RUT2 (Spoke) side
root@Teltonika-RUT955:~# ipsec statusall
Status of IKE charon daemon (strongSwan 5.9.2, Linux 5.4.229, mips):
uptime: 23 hours, since Mar 20 12:21:06 2023
worker threads: 11 of 16 idle, 5/0/0/0 working, job queue: 0/0/0/0, scheduled: 9
loaded plugins: charon aes des sha2 sha1 md4 md5 random nonce x509 revocation constraints pubkey pkcs1 pkcs8 pgp pem openssl gmp xcbc hmac kernel-netlink socket-default stroke vici updown eap-identity eap-mschapv2 xauth-generic
Listening IP addresses:
192.168.86.197
192.168.9.1
fd35:98cd:61f0::1
Connections:
passth_SPOKE_ph2_1_lan: %any...%any IKEv1/2
passth_SPOKE_ph2_1_lan: local: uses public key authentication
passth_SPOKE_ph2_1_lan: remote: uses public key authentication
passth_SPOKE_ph2_1_lan: child: 192.168.9.0/24 === 192.168.9.0/24 PASS
SPOKE-SPOKE_c: %any...84.15.162.30 IKEv2
SPOKE-SPOKE_c: local: uses pre-shared key authentication
SPOKE-SPOKE_c: remote: [84.15.162.30] uses pre-shared key authentication
SPOKE-SPOKE_c: child: dynamic === 0.0.0.0/0 TUNNEL
Shunted Connections:
passth_SPOKE_ph2_1_lan: 192.168.9.0/24 === 192.168.9.0/24 PASS
Security Associations (1 up, 0 connecting):
SPOKE-SPOKE_c[431]: ESTABLISHED 77 minutes ago, 192.168.86.197[192.168.86.197]...84.15.162.30[84.15.162.30]
SPOKE-SPOKE_c[431]: IKEv2 SPIs: ded11f31c20352dc_i* 58ebc8d96264c21e_r, pre-shared key reauthentication in 77 minutes
SPOKE-SPOKE_c[431]: IKE proposal: AES_CBC_256/HMAC_SHA2_512_256/PRF_HMAC_SHA2_512/ECP_521
SPOKE-SPOKE_c{14}: INSTALLED, TUNNEL, reqid 1, ESP in UDP SPIs: c7382615_i c27cb140_o
SPOKE-SPOKE_c{14}: AES_CBC_128/HMAC_SHA2_256_128/ECP_521, 136768 bytes_i (536 pkts, 6s ago), 235975 bytes_o (2169 pkts, 1s ago), rekeying in 13 minutes
SPOKE-SPOKE_c{14}: 10.20.30.1/32 === 0.0.0.0/0
root@Teltonika-RUT955:~# cat /tmp/ipsec/ipsec.conf # generated by /etc/init.d/ipsec version 2 conn passth_SPOKE_ph2_1_lan type=passthrough leftsubnet=192.168.9.1/24 rightsubnet=192.168.9.1/24 auto=route conn SPOKE-SPOKE_c left=%any right=84.15.162.30 leftsourceip=%config leftfirewall=yes rightfirewall=no ikelifetime=3h lifetime=1h margintime=9m keyingtries=3 dpdaction=none dpddelay=30s dpdtimeout=90s leftauth=psk rightauth=psk rightsubnet=0.0.0.0/0 auto=start aggressive=no forceencaps=no type=tunnel keyexchange=ikev2 esp=aes128-sha256-ecp521! ike=aes256-sha512-ecp521!