If everything was configurated correctly Teltonnika and MikroTik devices will be connected via L2TP+EoIP and the Teltonika device should receive the LAN IP address of the MikroTik.
+
To confirm this on the Teltonika router's WebUI navigate to '''Network → Interfaces → General''' on the LAN interface you should see MikroTik IP(in this example 192.168.88.x):
+
+
[[File:Networking rutxxx configuration examples DHCP LAN v1.png|border|class=tlt-border]]
+
+
Additionally, we can check if we can reach MikroTik router through L2TP IP(10.0.0.1) or a device behind the MikroTik. Once again open your device's CLI/SSH and execute the command ping 10.0.0.1 you should be able to reach the MikroTik virtual IP:
+
+
[[File:Networking rutxxx configuration examples virtual ip ping.png|border|class=tlt-border]]