TSW202 Interfaces: Difference between revisions

From Teltonika Networks Wiki
(Created page with "{{Template: Networking_tswos_manual_interfaces <!------------------------DEVICE-----------------------> | name = TSW202 | series = TSW2 <!----------------------SEPARAT...")
 
m (Vainius.l moved page Draft:TSW202 Interfaces to TSW202 Interfaces without leaving a redirect)
 
(No difference)

Latest revision as of 07:32, 25 October 2023

Main Page > TSW Switches > TSW202 > TSW202 Manual > TSW202 WebUI > TSW202 Network section > TSW202 Interfaces

The information in this page is updated in accordance with firmware version TSW2_R_00.01.03.1.

Summary

The Interfaces page is used to to set up network interfaces.

This manual page provides an overview of the Interfaces page in TSW202 devices.

Network Interfaces

The Network Interfaces section displays interfaces currently existing on this device.

Add Interface

The Add Interface section is used to create additional network interfaces. To create a new interface, simply enter a custom name for it and click the 'Add' button.

Interfaces Setup


Field Value Description
Enable off | on; default: off Toggle interface on or off
Protocol Static | DHCP | DHCPv6; default: Static Operation protocol of a network interface. Possible modes: Static: Manually configured device with a constant IP address that never changes. DHCP: Protocol that automatically provides temporary IP address to the device that could change on a regular basis. DHCPv6: The primary distinction between DHCPv6 and DHCP is that DHCP uses MAC addresses to identify clients, whereas DHCPv6 uses Unique Identifiers.
VLAN vlan1; default: vlan1 Logical overlay network that will be used to isolate the traffic for each group of devices that share a physical LAN
IPv4 address string; default: none Your router's address on the network
IPv4 netmask netmask; default: 255.255.255.0 Netmask defines how 'large' a network is
IPv4 gateway gateway; default: none The IPv4 gateway address used by this interface. An interface's default gateway is the default address through which all outgoing traffic is directed.
IPv6 address IPv6; default: none Assigns an IPv6 address for this interface. CIDR notation: address/prefix
IPv6 gateway gateway; default: none The IPv6 gateway address used by this interface. An interface's default gateway is the default address through which all outgoing traffic is directed.
DNS servers default: none Servers that will be used for matching website hostnames (e.g. example.com) to their corresponding Internet Protocol or IP addresses. Both IPv4 and IPv6 addresses may be used