Difference between revisions of "RUT241 esim dziugas"
(Created page with " <p style="color:red">The information in this page is updated in accordance with [https://wiki.teltonika-networks.com/view/FW_%26_SDK_Downloads'''00.07.09'''] firmware version...") |
|||
| Line 24: | Line 24: | ||
# Enable – '''''Default SIM''''' option; | # Enable – '''''Default SIM''''' option; | ||
# Click '''''Save & Apply''''' button at the bottom of the page; | # Click '''''Save & Apply''''' button at the bottom of the page; | ||
| − | [[File:RutOS_eSim_configuration_example_7.9_1.png|border|class=tlt-border | + | [[File:RutOS_eSim_configuration_example_7.9_1.png|border|class=tlt-border]] |
===Adding eSIM profile=== | ===Adding eSIM profile=== | ||
After enabling the eSIM card as a default SIM, we are able to add eSIM profile, which we would want to load. Navigate to '''1. Network → 2. Mobile → 3. eSIM profiles'''. | After enabling the eSIM card as a default SIM, we are able to add eSIM profile, which we would want to load. Navigate to '''1. Network → 2. Mobile → 3. eSIM profiles'''. | ||
| Line 33: | Line 33: | ||
'''Note:''' - ''You will need an internet source to download the eSIM profile.'' | '''Note:''' - ''You will need an internet source to download the eSIM profile.'' | ||
| − | [[File:RutOS_eSim_configuration_example_7.9_2.png|border|class=tlt-border | + | [[File:RutOS_eSim_configuration_example_7.9_2.png|border|class=tlt-border|1100px]] |
===eSIM profile switch=== | ===eSIM profile switch=== | ||
If you have several eSIM profiles, you can switch between them, to use the desired eSIM at the moment. Navigate to '''1. Network → 2. Mobile → 3. General'''. | If you have several eSIM profiles, you can switch between them, to use the desired eSIM at the moment. Navigate to '''1. Network → 2. Mobile → 3. General'''. | ||
| Line 42: | Line 42: | ||
# Click '''''Save & Apply''''' button at the bottom of the page; | # Click '''''Save & Apply''''' button at the bottom of the page; | ||
| − | [[File:RutOS_eSim_configuration_example_7.9_3.png|border|class=tlt-border | + | [[File:RutOS_eSim_configuration_example_7.9_3.png|border|class=tlt-border]] |
| − | |||
| − | |||
===Changing eSIM profile name=== | ===Changing eSIM profile name=== | ||
If you would like to change the eSIM profile name, you will need to navigate to '''1. Network → 2. Mobile → 3. eSIM profiles → 4. Click [[File:Pencil2.png]] button on the desired profile name'''. | If you would like to change the eSIM profile name, you will need to navigate to '''1. Network → 2. Mobile → 3. eSIM profiles → 4. Click [[File:Pencil2.png]] button on the desired profile name'''. | ||
| Line 52: | Line 50: | ||
# Click '''''Save & Apply''''' button to save the changes; | # Click '''''Save & Apply''''' button to save the changes; | ||
| − | [[File:RutOS_eSim_configuration_example_7.9_4.png|border|class=tlt-border| | + | [[File:RutOS_eSim_configuration_example_7.9_4.png|border|class=tlt-border|1100px]] |
| + | ===Deleting eSIM profile=== | ||
| + | If you would like to delete the eSIM profile, you will need to navigate to '''1. Network → 2. Mobile → 3. eSIM profiles'''. | ||
| + | ---- | ||
| + | '''Disclaimer''': ''Once you will delete the eSIM profile, the process cannot be undone and on some of the eSIM profiles, also it is not possible to activate the eSIM profile using the same activation code, so do so on your own risk.'' | ||
| + | Click on the following buttons: | ||
| + | # Choose which profile you want to delete and click - '''Delete''' button; | ||
| + | # You will be prompted to a popup window, if you are sure to delete the profile click again - '''Delete''' button; | ||
| + | [[File:RutOS_eSim_configuration_example_7.9_6.png|border|class=tlt-border|1100px]] | ||
| + | ===eSIM pending notifications=== | ||
| + | If you have gotten a pending notification about eSIM, you are able to check it out in eSIM profiles. Navigate to '''1. Network → 2. Mobile → 3. eSIM profiles'''. | ||
| + | ---- | ||
| + | There you will find a Status section, where there will be written '''Pending notifications''', click on the '''Show''' button, to check out what notifications were generated about the eSIM. These notifications are generated, when the desired task is failed and to check it out and process it once again. | ||
| + | [[File:RutOS_eSim_configuration_example_7.9_9.png|border|class=tlt-border]]<br> | ||
| + | ---- | ||
| + | If you would like to process the events once again, click on ''' Process notifications''' button. | ||
| + | [[File:RutOS_eSim_configuration_example_7.9_10.png|border|class=tlt-border]]<br> | ||
| + | ---- | ||
| + | Then you will be prompted to a popup window, asking if you want to process the pending notifications once again, click on '''Process''' button to continue. | ||
| + | [[File:RutOS_eSim_configuration_example_7.9_11.png|border|class=tlt-border]] | ||
==Testing the configuration== | ==Testing the configuration== | ||
To check if the eSIM profile was downloaded and is working properly on the device, we can check it via WebUI of the device. Navigate to '''1. Status → 2. Network → 3. Mobile'''. There you should see if the eSIM is connected to the operator. | To check if the eSIM profile was downloaded and is working properly on the device, we can check it via WebUI of the device. Navigate to '''1. Status → 2. Network → 3. Mobile'''. There you should see if the eSIM is connected to the operator. | ||
[[File:RutOS_eSim_configuration_example_7.9_5.png|border|class=tlt-border|center|1100px]] | [[File:RutOS_eSim_configuration_example_7.9_5.png|border|class=tlt-border|center|1100px]] | ||
Revision as of 13:43, 5 September 2024
The information in this page is updated in accordance with 00.07.09 firmware version.
Introduction
Traditionally, we use a SIM card, also known as a Subscriber Identity Module card, which is a small, removable card in cellular devices that stores user identity and authentication information for accessing mobile networks. However there is a new feature, where we do not need to physically have a SIM card, we can have a eSIM card, which stands for embedded Subscriber Identity Module, that is an electronic version of a SIM card! eSIM most of the time comes directly embedded into the device's motherboard, which cannot be removed or replaced by the user of the device.
Configuration overview and prerequisites
Before we begin, let's look at the configuration we are attempting to achieve and the prerequisites that make it possible.
Prerequisites:
- One RUT/RUTX series router or TRB gateway with RUTOS firmware and eSIM feature;
- One eSIM which we would be able to use;
- An end device (PC, Laptop) for configuration;
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.
Device configuration
In this configuration we will enable and activate eSIM card.
Activating eSIM card
Firstly, we will need to enable the eSIM as a default SIM for the device. Start by logging to the WebUI, navigate to 1. Network → 2. Mobile → 3. General.
Make the following changes:
- Move to - SIM2(eSIM1) section;
- Enable – Default SIM option;
- Click Save & Apply button at the bottom of the page;
Adding eSIM profile
After enabling the eSIM card as a default SIM, we are able to add eSIM profile, which we would want to load. Navigate to 1. Network → 2. Mobile → 3. eSIM profiles.
Make the following changes:
- Activation code – Code provided by the eSIM provider;
- Once provided - click on Download button;
Note: - You will need an internet source to download the eSIM profile.
eSIM profile switch
If you have several eSIM profiles, you can switch between them, to use the desired eSIM at the moment. Navigate to 1. Network → 2. Mobile → 3. General.
Make the following changes:
- Move to - SIM2(eSIM2) section or to the one that you would like to switch to;
- Enable – Default SIM option;
- Click Save & Apply button at the bottom of the page;
Changing eSIM profile name
If you would like to change the eSIM profile name, you will need to navigate to 1. Network → 2. Mobile → 3. eSIM profiles → 4. Click 
button on the desired profile name.
Make the following changes:
- Write the desired name for the eSIM in the – Name section;
- Click Save & Apply button to save the changes;
Deleting eSIM profile
If you would like to delete the eSIM profile, you will need to navigate to 1. Network → 2. Mobile → 3. eSIM profiles.
Disclaimer: Once you will delete the eSIM profile, the process cannot be undone and on some of the eSIM profiles, also it is not possible to activate the eSIM profile using the same activation code, so do so on your own risk. Click on the following buttons:
- Choose which profile you want to delete and click - Delete button;
- You will be prompted to a popup window, if you are sure to delete the profile click again - Delete button;
eSIM pending notifications
If you have gotten a pending notification about eSIM, you are able to check it out in eSIM profiles. Navigate to 1. Network → 2. Mobile → 3. eSIM profiles.
There you will find a Status section, where there will be written Pending notifications, click on the Show button, to check out what notifications were generated about the eSIM. These notifications are generated, when the desired task is failed and to check it out and process it once again.
If you would like to process the events once again, click on Process notifications button.
Then you will be prompted to a popup window, asking if you want to process the pending notifications once again, click on Process button to continue.
Testing the configuration
To check if the eSIM profile was downloaded and is working properly on the device, we can check it via WebUI of the device. Navigate to 1. Status → 2. Network → 3. Mobile. There you should see if the eSIM is connected to the operator.
