Template:Rms manual management device submenu add device

To add a new device(s) to RMS, hover your mouse pointer over the Device submenu (Management → Device) and click Add device:

---

In the pop-up box select your company, choose the device's type (RUT or TRB), enter the device's serial number*, LAN MAC Address* (IMEI* for TRB) and a custom name. Click the plus () symbol to add more than one device. Click Add:

* You can find the serial number, LAN MAC address and IMEI on the device's package or in the WebUI, in the System → Administration → RMS page

---

Don't forget to set the Connection type field the Enabled on the device(s) that you are trying to add. You can do that from the System → Administration → RMS:

---

Wait for about a minute for the system to finish adding the device(s). You will know the process is done when the word "Done" appears under the Status field:

---

You can close the box earlier if you wish. You should be able to see the newly added device(s) in the device table. When status circle turns green, the system will have finished adding the device to RMS: