RUT955 Mobile: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
No edit summary
No edit summary
Line 1: Line 1:
==Summary==
{{Template: Networking_rutxxx_manual_mobile
 
<!----------------------------DEVICE DETAILS---------------------------->
{{Template: webui_network_mobile_summary}}
| name                              = RUT955
 
| series                            = RUT9xx
==General==
| fw_version                        = RUT9XX_R_00.06.03.2
 
| 3g                                = 0
The '''General''' tab is used to configure mobile data connection parameters for SIM1 and SIM2, such as Service mode, Connection type, APN and more. All of the examples given below are concerning SIM1. SIM2 configuration is identical to SIM1. To configure SIM2 all you need to do is select the SIM2 tab. This is true for all cases in the Network → Mobile section of the router's WebUI (General, SIM Management, etc.)
<!-------------------------------GENERAL------------------------------->
 
| file_general_configuration      = Networking_rut9xx_manual_mobile_general_mobile_configuration_v1.png
===Mobile Configuration===
| file_general_demand            = Networking_rut9xx_manual_mobile_general_mobile_data_on_demand_v1.png
----
| file_general_bands              = Networking_rut9xx_manual_mobile_general_network_frequency_bands_v1.png
The '''Mobile Configuration''' section is used to configure main SIM card parameters.
| file_general_force_lte          = Networking_rutxxx_manual_mobile_general_force_lte_network_v1.png
 
<!----------------------------SIM MANAGEMENT--------------------------->
[[File:Network mobile general configuration RUT9 v2.PNG]]
| file_primary_sim_card          = Networking_rut9xx_manual_mobile_sim_management_primary_card_v1.png
 
| file_primary_sim_switching      = Networking_rut9xx_manual_mobile_sim_management_sim_switching_v1.png
<table class="nd-mantable">
| file_primary_sim_conditions     = Networking_rut9xx_manual_mobile_sim_management_sim_switch_conditions_v1.png
    <tr>
<!---------------------------NETWORK OPERATORS------------------------->
        <th>Field</th>
| file_network_operators_scan     = Networking_rutxxx_manual_mobile_network_operators_scan_v1.png
      <th>Value</th>
| file_network_operators_settings = Networking_rut9xx_manual_mobile_network_operators_settings_v1.png
      <th>Description</th>
| file_operator_list_settings     = Networking_rutxxx_manual_mobile_network_operators_operator_lists_settings_v1.png
    </tr>
| file_operator_list              = Networking_rutxxx_manual_mobile_network_operators_operator_lists_operator_list_v1.png
    <tr>
<!---------------------------MOBILE DATA LIMIT------------------------->
      <td>Connection type</td>
| file_data_limit_configuration  = Networking_rut9xx_manual_mobile_mobile_data_limit_configuration_v1.png
      <td>QMI | NCM | NDIS | PPP; default: <b>QMI</b></td>
| file_data_limit_warning         = Networking_rutxxx_manual_mobile_mobile_data_limit_sms_warning_configuration_v1.png
      <td>Defines how the router's modem will establish a connection to the ISP (Internet Service Provider)
| file_data_limit_clear          = Networking_rutxxx_manual_mobile_mobile_data_limit_clear_data_limit_v1.png
'''PPP''' uses a dialling number to establish a data connection
<!------------------------------SMS LIMIT------------------------------>
 
| file_sms_limit_config          = Networking_rutxxx_manual_mobile_sms_limit_configuration_v1.png
'''QMI''' does not use dialling or the PPP protocol to establish data connection and it is usually faster than PPP mode
| file_sms_limit_clear            = Networking_rutxxx_manual_mobile_sms_limit_clear_v1.png
 
<!--------------------------SIM IDLE PROTECTION------------------------>
'''NOTE''': PPP connection type exists on all RUT devices, but '''QMI''' does not. If you have a RUT device with a '''Telit''' modem, '''QMI''' will be replaced by '''NCM'''. If your RUT device has a '''Huawei''' modem, you will see '''NDIS''' instead of '''QMI'''. '''QMI''' connection type is available on RUT devices that use a '''Quectel''' modem (which is the standard modem for most RUT devices) </td>
| file_sim_idle_settings          = Networking_rut9xx_manual_mobile_sim_idle_protection_settings_v1.png
    </tr>
| file_sim_idle_test              = Networking_rut9xx_manual_mobile_sim_idle_protection_test_v1.png
    <tr>
}}
      <td>Mode</td>
      <td>NAT | Passthrough'''*''' | Bridge'''**'''; default: <b>NAT</b></td>
      <td>'''NAT''' mode enables network address translation on the router
'''Bridge''' mode bridges the LTE data connection with LAN. In this mode the router does not have an internet connection as the ISP provides an IP address directly to the end device (e.g., computer). Using Bridge mode will disable most of the router’s capabilities and you will only be able to access your router's settings with a static IP address.
 
'''Passthrough''' mode works in a similar fashion to Bridge mode, except in passthrough mode the router will have an internet connection and be reachable from LAN, because the router's DHCP Server will not get disabled</td>
    </tr>
    <tr>
    <td>APN</td>
        <td>string; default: <b>none</b></td>
        <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require to enter the APN just to complete the registration to a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract. <br> '''NOTE''': an APN Network Identifier cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*"</td>
     </tr>
    <tr>
    <td>PIN number</td>
        <td>string; default: <b>none</b></td>
        <td>A personal identification number (PIN) is a numeric password used to authenticate a user to a system (in this case, the user to the SIM card)</td>
     </tr>
    <tr>
      <td>Dialing number</td>
      <td>string; default: <b>none</b></td>
      <td>A Dialling number is used to establish a mobile PPP connection</td>
     </tr>
    <tr>
      <td>MTU</td>
      <td>integer [0..1500]; default: <b>1500</b></td>
      <td>MTU (Maximum Transmission Unit) specifies the largest possible size of a data packet</td>
    </tr>
    <tr>
    <td>Authentication method</td>
        <td>CHAP | PAP | None; default: <b>None</b></td>
         <td>The Authentication method that your GSM carrier uses to authenticate new connections on its network</td>
    </tr>
    <tr>
    <td>Username</td>
        <td>string; default: <b>none</b></td>
        <td>The username used to connect to your carrier’s network. This field becomes available when you select an Auth Mode (i.e., the selected Auth Mode is not “None”)</td>
    </tr>
    <tr>
      <td>Password</td>
      <td>string; default: <b>none</b></td>
      <td>The password used to connect to your carrier’s network</td>
    </tr>
    <tr>
      <td>Service mode</td>
      <td>2G only | 3G only | 4G (LTE) only | Automatic; default: <b>Automatic</b></td>
      <td>Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE) you can specify to which type of network you wish to connect to, e.g., if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity</td>
    </tr>
    <tr>
    <td>Deny data roaming</td>
        <td>yes | no; default: <b>no</b></td>
        <td>When enabled this function prevents the device from establishing mobile data connection while not in your home network</td>
    </tr>
    <tr>
    <td>Use IPv4 only</td>
        <td>yes | no; default: <b>yes</b></td>
        <td>When enabled this function makes the device use only IPv4 settings when connecting to an operator</td>
    </tr>
</table>
'''* More on Passthrough mode in the [[#Passthrough_mode|2.4]] subsection of this chapter'''
 
'''** More on Bridge mode in the [[#Bridge_mode|2.5]] subsection of this chapter'''


===Mobile Data On Demand===
===Mobile Data On Demand===

Revision as of 12:41, 24 July 2019

Main Page > EOL Products > RUT955 > RUT955 Manual > RUT955 WebUI > RUT955 Network section > RUT955 Mobile

Template:Networking rutxxx manual mobile

Mobile Data On Demand

The Mobile Data On Demand function keeps the mobile data connection ON only when it is in use. When the router detects that there is no traffic, it shuts down the mobile data connection and turns it back ON only when there is a "Demand" (a user trying to reach a website, for example).

Field Value Description
Enable yes | no; default: no Toggles Mobile Data On Demand ON or OFF
NOTE: This function is only available whith PPP Connection type
No data timeout (sec) integer [10..3600]; default: 10 Mobile data connection will be terminated if no data is transferred during the timeout period specified in this field

Force LTE network

The Force LTE network function makes the router forcefully connect to an LTE network at a specified period of time.

Field Value Description
Enable yes | no; default: no Toggles Force LTE network ON or OF
Reregister yes | no; default: no When enabled the modem will reregister before trying to connect to an LTE network
Timeout (sec) integer [180..3600]; default: 300 Time in seconds between attempts to connect to an LTE network

Passthrough mode

In Passthrough mode the router assigns its WAN IP address to another device instead of Network Address Translation (NAT). It is similar to Bridge mode, except in Passthrough mode other devices can still connect to the router and get LAN IP addresses and both other clients and the router retain Internet access, while Bridge mode also disables the router's DHCP Server.

Field Value Description
DHCP mode Static | Dynamic | No DHCP; default: Static Specifies DHCP mode used with Passthrough mode

Static mode requires that you enter your computer’s MAC address (xx:xx:xx:xx:xx:xx) and select a lease time (expiration time for the leased address). The device will get an IP address from your GSM operator. Other devices that are connected to the router will get IP addresses from the router’s DHCP server, but they will not have internet access.

In Dynamic mode the GSM operator will connect to the router first and give out an IP address to one of your connected devices. The device will be selected at random, therefore, you should usually use Dynamic mode when you have only one device (e.g., computer) connected to the router. When using Passthrough in Dynamic mode, the router‘s LAN DHCP server will be disabled, but it will enabled again automatically when you switch to a different mode.

In No DHCP mode the IP address, subnet mask, default gateway and DNS from the GSM operator will have to be entered on your computer manually. When using Passthrough in No DHCP mode, the router‘s LAN DHCP server will be disabled, but it will become enabled automatically when you switch to a different mode
MAC address mac; default: none MAC address of the device (e.g., computer)
Lease time time; default: 12h The duration of an IP lease. Leased out addresses will expire after the amount of time specified in this field and the device that was using the lease will have to send a new DHCP request to the router's DHCP server. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes, e.g., if the lease time is 12 hours, then every 6 hours the device will send a request to the router asking to renew its lease.
Lease time can be set in hours or minutes. The minimal amount of time that can be specified is 2min

Note: Using Passthrough mode will disable most of the router’s capabilities.

Bridge mode

In Bridge mode the router assigns its WAN IP address to another device. It is used instead of Network Address Translation (NAT) in order to make the router "transparent" in the communication process. The main difference between Passthrough and Bridge is that in Passthrough, the router's DHCP Server still works and the regular LAN interface is still up, therefore, allowing clients to connect to the router's local network as usual, while Bridge mode disables all of these features and simply gives the a single specified device its WAN IP address. Since Bridge uses less of the router's features, it is a bit faster than Passthrough.

Field Value Description
Bind to MAC mac; default: none Specifies the MAC address of the device that will work with the router in Bridge mode, i.e., the device whose MAC is specified in this field will be assigned the router's Mobile WAN IP address.

NOTE: using Bridge Mode will disable most of the router's capabilities and you can access your router's settings only through its Static IP address.

If you have configured Bridge mode and can no longer reach your router, you'll need to set up a Static IP address on your PC in order to do so. If you don't know how to set up a Static IP, you can check out our how to guide on this subject:

SIM Management

The SIM Management window provides you with the possibility to specify the primary SIM card and setup SIM switching rules. SIM switching is used as precautionary measure when the user has two working SIM cards. For example, if the user has two SIM cards with limited data, you can setup a rule that switches the SIM card in use to the secondary SIM card when the data limit is reached. You can setup similar rules for SMS limit, signal strength and more.

SIM Switching

The SIM Switching section is used to enable SIM switching and set the SIM switching check interval. Above it is a small section that provides you with possibility to change router's primary SIM card.

Field Value Description
Primary SIM card SIM1 | SIM2; default: SIM1 Specifies which SIM card is the primary one. The primary SIM card is the one the router uses by default, which means that after a reboot or a modem restart, the router will start using the primary SIM card even if secondary SIM cad was in use before
Enable automatic switching* yes | no; default: no Enables SIM Switching rules
Check interval integer; default: 30 A time interval after which the router checks for condition changes corresponding to SIM switch rules. If such condition exist, the router will perform a SIM switch, if not - it will check for the same conditions again after the amount of time specified in this field

*Remember to check the Enable automatic switching field in order to make you SIM switching rules work

SIM switching scenarios

This section is used to configure SIM switching scenarios, i.e., setting up circumstances under which the router will perform a switch from using one SIM card to the other.

Field Value Description
On weak signal yes | no; default: no Performs a SIM switch when signal strength falls below the specified threshold (next field)
Signal strength (dBm) integer; default: none Specifies the signal strength threshold. If signal strength fall below this threshold, the router will perform a SIM switch
On data limit yes | no; default: no Performs a SIM switch when the SIM card reaches the specified data limit for the designated period. Mobile Data Limit can be configured in the Services → Mobile → Mobile Data Limit section
On SMS limit yes | no; default: no Performs a SIM switch when the SIM card reaches the specified SMS limit for the designated period (next three fields)
Period Month | Week | Day; default: Month SMS limit period
Start day | Start hour day [1..31] | day [Monday..Sunday] | hour [1..24]; default: day 1 SMS limit counting start time. For example, if the selected Period is Month and Start day is 5, every month on the fifth day the SMS limit counter will reset and start counting the SMS limit over again
SMS limit*</ integer; default: none Specifies the SMS limit after which the router will perform a SIM switch
On roaming yes | no; default: no Performs a SIM switch when roaming is detected (when the SIM card connects to foreign operators)
No network yes | no; default: no Performs a SIM switch when no operator is detected
On network denied yes | no; default: no Performs a SIM switch when access to a network is denied (usually by an operator)
On data connection fail yes | no; default: no Performs a SIM switch when access to a network is denied (usually by an operator)
Method LCP echo | ICMP echo; default: LCP echo The method used to identify a connection failure
Health monitor ICMP host(s) ip | hostname; default: 8.8.8.8 A remote host to ping (send an ICMP (Internet Control Message Protocol) packet to) and determine when the connection goes down. Choose a host that is always reachable through WAN (Wide Area Network) and is rarely down, for example, Google's DNS (8.8.8.8)
Health monitor ICMP timeout 1 sec. | 2 sec. | 3 sec. | 4 sec. | 5 sec. | 10 sec.; default: 3 sec. The timeout value for ICMP packets, i.e., how frequently ICMP packets will be sent to the specified host
Attempts before SIM failover 1 | 3 | 5 | 10 | 15 | 20; default: 3 Failed ping attempts' count before switching to the secondary SIM card. For example, if 3 is chosen, the router will perform a SIM switch after three unsuccessful ping attempts to the specified host

*Your carrier's data and SMS usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur

Switch back to primary SIM

Switch back to primary SIM card after timeout is a SIM switching rule that can only be configured on the secondary SIM card. It's purpose is to switch the router back to using the primary SIM after a SIM switch rule is triggered for the primary SIM card.

Field Value Description
Switch back to primary SIM card after timeout yes | no; default: no Performs a SIM switch back to the primary SIM card after a specified amount of time
Initial timeout (min) integer; default: 1 The amount of time after which the router will attempt to switch back to using the primary SIM card
Subsequent timeout (min) integer; default: 0 A subsequent timeout value added to Initial timeout if the previous attempt to switch back to primary SIM failed. This value is increased every time an unsuccessful switch-back is made:

new_timeout = old_timeout + subsequent_timeout

Example: Let's say you've configured a rule that dictates the router to switch to Secondary SIM if signal strength falls below -90 dBm and a rule that will switch back to Primary SIM with both the initial and subsequent timeouts of 1 minute (i.e., Initial timeout = Subsequent timeout = 1). If signal strength does indeed fall below this threshold, the router will switch to Secondary SIM card, wait 1 minute (Initial timeout), switch back to Primary SIM card, check the signal strength value and, if signal strength value is still below -90 dBm, switch back again to Secondary SIM card. This time the router will try to switch back to Primary SIM card after 2 minutes, i.e., new_timeout = old_timeout + subsequent_timeout = 1 minute + 1 minute = 2 minutes. The third time the router will 3 minutes, the fourth time - 4 minutes, and so on until the signal strength of the Primary SIM card rises above -90 dBm.

Network Operators

The Network Operators window provides you with the ability to scan, select and enter manual Network Operator codes. This function is a great utility when the router is used in roaming conditions. Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the primary SIM in the Sim Management section.

Scan For Network Operators

Scan For Network Operators is a function that initiates a scan for available network operators in your area. To initiate a scan, press the "Scan for operators button". After you do so you will be prompted with a pop-up asking you if you're really sure, since while the scan is in progress you will lose your data connection for approximately 2 minutes. To proceed click Ok.

After the scan is complete you will be provided with a list of operators similar to the one in the example above (except with the available operators from your area). The list provides such information as operator's name, code and network access type. You can also choose to which operator you would like to connect provided that the operator's status is not Forbidden.

Below the list is the scan button if you should choose to repeat the scan and the Connection mode box containing options on how you want the router to connect to network operators. The box contains three choices: Auto (default), Manual-Auto and Manual.

When set to Auto the router automatically connects to the network operator with the best connectivity.

The Manual choice prompts you to enter an operator's code that the router will then always try to connect to (even if previous attempts have been unsuccessful).

Manual-auto also prompts you to enter an operator's code but if the router can't complete the connection, it will automatically connect to the next available operator.

Most network operators' codes can be found online or you can initiate a scan for operators - if the operator you're looking for can be reached from your current area, the list of available network operators will contain the desired operator's code.

Operators List

The Operators List tab is used for creating a Blacklist or Whitelist for undesired or desired operators.

Field Value Description
Enable yes | no; default: no Toggles Operators List ON or OFF
Mode Blacklist | White list; default: Blacklist The type of list

Blacklist - operators residing in the blacklist will considered forbidden and your router will not attempt to connect to them even if they are available

White list - operators residing in the white list will be the only operators that the router will be trying to connect to. Other operators, that are not in the white list, will be considered forbidden
Name string; default: none Operator's name. Used only for easier management purposes
Operator code integer; default: none Operator's code. You can find network operator codes online or use the router's Scan for operators function described here

Be mindful when using the Operators List function as it very easy to block yourself from the right operators!

Mobile Data Limit

The Mobile Data Limit page provides you with the possibility to set data limits for your SIM cards and data usage warnings via SMS message in order to protect yourself from unwanted data charges.

Data Connection Limit Configuration

The Data Connection Limit Configuration section is used to configure custom mobile data limits for your SIM card(s). When the mobile data limit set for the SIM card(s) is reached, the router will no longer use the mobile connection to establish data until the limit period is over or the limit is reset by the user.

Field Value Description
Enable data connection limit yes | no; default: no Turns mobile data limitations on or off.
Data limit* (MB) integer; default: none The ammount of data that is allowed to be downloaded over the specified period of time. When the limit is reached, the router will no longer be able to establish a data connection until the period is over or data limit is reset.
Note: after the router has reached the data limit it will not switch to using the secondary SIM card. If you wish to configure a SIM switch system based on received data limit, instructions can be found in the SIM Switching rules section of this page.
Period Month | Week | Day; default: Month Data limit period after which the data counter is reset on the specified Start day.
Start day | Start hour day [1..31] | day [Monday..Sunday] | hour [1..24]; default: day 1 Specifies when the period of counting data usage should begin. After the period is over, the limit ir reset and the count begins over again.

*Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.

SMS Warning Configuration

The SMS Warning Configuration section provides you with the possibility to configure a rule that sends you an SMS message after the router's SIM card(s) uses a specified amount of mobile data.

Field Value Description
Enable SMS warning yes | no; default: no Toggles SMS warning On or OFF
Data limit* (MB) integer; default: none The received data limit. After reaching the specified data limit, the router will send out an SMS warning message to the specified phone number
Period Month | Week | Day; default: Month Period for which the data limit applies to
Start day | Start hour day of the month [1..31] | day of the week [Monday..Sunday] | hour of the day [1..24]; default: 1 Specifies when the period of counting data usage should begin. After the period is over, the limit ir reset and the count begins over again.
Phone number phone number; default: none Recipient's phone number

Clear Data Limit

The Clear Data Limit section contains only one button - 'Clear data limit'. When clicked, the button resets the data limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.

Important: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.

SMS Limit

The SMS Limit page provides you with the possibility to set up a limit of SMS messages that each of the router's SIM cards can send in period of one day, week or a month.

SMS Limit Configuration

The SMS Limit Configuration section is used to configure custom SMS limits for your SIM card(s). In order to limit sent SMS messages, select the SIM card (SIM1 or SIM2), enable SMS limit and configure the limit conditions. For related information, refer to the figure and table below.

File:Networking rutxxx manual mobile sms limit configuration v1.png

Field Value Description
Enable SMS limit yes | no; default: no Turns SMS limitations on or off.
Period Month | Week | Day; default: Month SMS limit period after which the sent SMS counter is reset on the specified Start day.
Start day | Start hour day of the month [1..31] | day of the week [Monday..Sunday] | hour of the day [1..24]; default: 1 Specifies when the period of counting SMS messages should begin. After the period is over, the limit ir reset and the count begins over again.
SMS limit* integer; default: none Number of SMS messages that the is allowed to be sent over the specified period of time. When the limit is reached, the router will no longer be able to send SMS messages until the period is over or SMS limit is reset.
Note: after the router has reached the SMS limit it will not switch to using the secondary SIM card. If you wish to configure a SIM switch system based on sent SMS limit, instructions can be found in the SIM Switching rules section of this page.

* Your carrier's SMS usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.

Clear SMS Limit

The Clear SMS Limit section displays the ammount of sent SMS messages and provides the possibility to reset that counter. When the 'Clear SMS button' is clicked, it clears the SMS limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.

File:Networking rutxxx manual mobile sms limit clear v1.png

Important: remember that the 'Clear SMS limit' button doesn't clear the actual sent SMS statistics for the SIM card, only the SMS counters as calculated by the router.

SIM Idle Protection

Some operators block user SIM cards after a period of inactivity. The SIM Idle Protection window provides you with the possibility to configure the router to periodically switch to the secondary SIM card and establish a data connection with a mobile network operator in order to break the idleness and prevent the SIM card from being blocked.

Settings

The Settings tab is used to configure the parameters used by the SIM Idle Protection function.

Field Value Description
Enable yes | no; default: no Toggless SIM Idle Protection ON or OFF
Period Month | Week; default: Month Period after which a SIM switch will occur
Day day [1..31] | day [Monday..Sunday]; default: day 1 Day of the month or week when the SIM switch will occur
Hour hour [1..24]; default: 1 Hour of the day when the SIM switch will occur
Minute minute [0..59]; default: 1 Minute of the hour when the SIM switch will occur
Host to ping ip; default: 127.0.0.1 When the SIM switch occurs, the router will ping a host specified in this field
Ping package size integer [1..100]; default: 56 Size (in bytes) of the package that will be sent
Ping requests integer [1..30]; default: 2 How many ping packets will be sent

Test

Once you have configured your SIM Idle Protection settings, the Test tab will provide you with possibility to test these settings to make sure everything works correctly. Once you click the Test* button, the test will initiate. The test is designed to simulate SIM Idle Protection according to your current SIM Idle Protection settings.

The test takes about 2 minutes, so make sure the router isn't doing anything important before you start the test because during it you will lose connectivity. Once you have started the test you will see this warning appear:

It is very important to heed this advice since if you commit any action during test phase (apply new configurations, reboot the router, etc.) you may cause the router to crash, which could require a Factory Reset to fix

Above is an example of a successful Test. The test results display both SIM cards' IMSI (International Mobile Subscriber Identity), ICCID (Integrated Circuit Card Identifier), host to ping, WAN IP and whether the ping was successful or not.

USB Modem

The USB Modem section is used to configuration the connection settings of a USB modem attached to the router's USB connector. This section only becomes visible when a USB modem is connected to the router.

The configuration is a minimalistic version of the regular SIM card settings page:

Field Value Description
APN string; default: none An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require to enter the APN just to complete the registration to a network. In other cases, APN is used to get special parameters from the operator (e.g., a public IP address) depending on the contract.
NOTE: an APN Network Identifier cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*"
PIN number string; Default: none A personal identification number (PIN) is a numeric password used to authenticate a user to a system (in this case, the user to the SIM card)
Authentication method CHAP | PAP | None; Default: None The Authentication method that your GSM carrier uses to authenticate new connections on its network
Username string; Default: none The username used to connect to your carrier’s network. This field becomes available when you select an Auth Mode (i.e., the selected Auth Mode is not “None”)
Password string; Default: none The password used to connect to your carrier’s network
Service mode 2G only | 3G only | 4G (LTE) only | Automatic; Default: Automatic Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE) you can specify to which type of network you wish to connect to, e.g., if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity

To select the USB modem to act as a WAN connection, go to the Network → WAN page.

For step-by-step instructions, click here.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT955_Mobile&oldid=41112"