Template:Networking device manual powering options passive poe: Difference between revisions

Revision as of 13:44, 6 April 2020

The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use with other ports!)

[[File:{{{file_lan1}}}]]

The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.

**RJ45 pinout**:
Pin	10/100 mode B, DC on spares		T568A Color	T568B Color	Pins on plug face (socket is reversed)
1		TX+	white/green stripe	white/orange stripe
2		TX-	green solid	orange solid
3		RX+	white/orange stripe	white/green stripe
4	DC+	9-30 VDC	blue solid	blue solid
5	DC+	9-30 VDC	white/blue stripe	white/blue stripe
6		RX-	orange solid	green solid
7	DC-		white/brown stripe	white/brown stripe
8	DC-		brown solid	brown solid

@@ Line 2: / Line 2: @@
 The device may also be powered by an Ethernet cable via the <b>{{#ifeq:{{{series}}}|RUT2xx|LAN|LAN1}}</b> port:<br>
-'''(Don't use in other ports)'''
+'''(Do not use with other ports!)'''
-[[File:{{{file_lan1}}}|{{{size_lan1}}}px]]
+[[File:{{{file_lan1}}}]]
 <font size="-1">