Template:Networking rutos manual mobile utilities: Difference between revisions

From Teltonika Networks Wiki
VisualWikitext
(Created page with "==Summary== {{{name}}} routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to t...")
 
No edit summary
Line 91: Line 91:
provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar.
provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar.
Instead, only tables containing information on how to edit each rule will be provided.
Instead, only tables containing information on how to edit each rule will be provided.
====Reboot====
====Reboot====
 
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
<div class="NavFrame">
<tr>
<div class="NavHead">'''Title 2'''</div>
      <th>FIELD NAME</th>
<div class="NavContent" style="display: none;">
  <th>DESCRIPTION</th>
{| class="mw-collapsible mw-collapsed nd-mantable"
    <th>EXPLANATION, NOTES</th>
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
</tr>
|-
<tr>
| Enable || This will enable or disable SMS reboot function || Allows router to restart via SMS
        <td>Enable</td>
|-
        <td>This will enable or disable SMS reboot function</td>
| Action || The action to be performed when this rule is met || Reboots the router
        <td>Allows router to restart via SMS</td>
|-
</tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
<tr>
|-
        <td>Action</td>
| Get status via SMS after reboot || Check this to receive connection status via SMS after the reboot || If enabled, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule
        <td>The action to be performed when this rule is met</td>
|-
        <td>Reboots the router</td>
| Modem || Select which modem you want to use || Which modem is configured
</tr>
|-
<tr>
| Gateway modem || Select which modem you want to use || Which modem is configured
        <td>SMS text</td>
|-
        <td>SMS text that will trigger the rule</td>
| Message text || Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available || You can select which status elements to display
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td>
|-
</tr>
| Authorization method || What kind of authorization to use || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Get status via SMS after reboot</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>Check this to receive connection status via SMS after the reboot</td>
|}
        <td>If enabled, the router will send a status message once it has rebooted and is operational again. This is
 
            both a separate SMS Rule and an option under the SMS Reboot rule</td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Gateway modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Message text</td>
        <td>Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available
        </td>
        <td>You can select which status elements to display</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
====Send status====
====Send status====
{| class="mw-collapsible mw-collapsed nd-mantable"
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
    <th>FIELD NAME</th>
| Enable || This will enable or disable SMS status function || Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
    <th>DESCRIPTION</th>
|-
    <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the '''Message text''' field
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <td>Enable</td>
|-
        <td>This will enable or disable SMS status function</td>
| Modem || Select which modem you want to use || Which modem is configured
        <td>Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS
|-
            Reboot rule</td>
| Gateway modem || Select which modem you want to use || Which modem is configured
</tr>
|-
<tr>
| Message text || Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available|| You can select which status elements to display
        <td>Action</td>
|-
        <td>The action to be performed when this rule is met</td>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>Returns an SMS message containing information about the status of the router. The type of information
|-
            contained within the message can be specified in the '''Message text''' field</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''  
</tr>
|}
<tr>
 
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Gateway modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Message text</td>
        <td>Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available
        </td>
        <td>You can select which status elements to display</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
====Switch mobile data ON/OFF====
====Switch mobile data ON/OFF====
{| class="mw-collapsible mw-collapsed nd-mantable"
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
  <tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the Switch mobile data function || Allows mobile control via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Turn mobile data ON or OFF
</tr>
|-
  <tr>
| State || The state to which mobile data will be set when this rule is met. || If you set it as ON it will turn on mobile data if OFF it will turn it off.
        <td>Enable</td>
|-
        <td>This will enable or disable the Switch mobile data function</td>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <td>Allows mobile control via SMS</td>
|-
</tr>
| Modem || Select which modem you want to use || Which modem is configured
  <tr>
|-
        <td>Action</td>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>The action to be performed when this rule is met</td>
|-
        <td>Turn mobile data ON or OFF</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
|}
  <tr>
        <td>State</td>
        <td>The state to which mobile data will be set when this rule is met.</td>
        <td>If you set it as ON it will turn on mobile data if OFF it will turn it off.</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter</td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====SSH access control====
====SSH access control====
{| class="mw-collapsible mw-collapsed nd-mantable"
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the SSH access control function || Allows SSH access control via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Turns SSH access ON or OFF
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter      
        <td>Enable</td>
|-
        <td>This will enable or disable the SSH access control function</td>
| Enable SSH access || Enables or Disables SSH access from LAN || If this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
        <td>Allows SSH access control via SMS</td>
|-
</tr>
| Enable remote SSH access || Enables or Disables SSH access from WAN || If this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN
<tr>
|-
        <td>Action</td>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>The action to be performed when this rule is met</td>
|-
        <td>Turns SSH access ON or OFF</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
</tr>
|}
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Enable SSH access</td>
        <td>Enables or Disables SSH access from LAN</td>
        <td>If this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN</td>
</tr>
<tr>
        <td>Enable remote SSH access</td>
        <td>Enables or Disables SSH access from WAN</td>
        <td>If this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Web access Control====
====Web access Control====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the Web access control function || Allows Web access control via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Turns access to WebUI ON or OFF
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter      
        <td>Enable</td>
|-
        <td>This will enable or disable the Web access control function</td>
| Enable HTTP access || Enables or Disables HTTP access from LAN || If this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
        <td>Allows Web access control via SMS</td>
|-
</tr>
| Enable HTTPS access || Enables or Disables HTTPS access from LAN || If this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN
<tr>
|-
        <td>Action</td>
| Enable remote HTTP access || Enables or Disables HTTP access from WAN || If this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
        <td>The action to be performed when this rule is met</td>
|-
        <td>Turns access to WebUI ON or OFF</td>
| Enable remote HTTPS access || Enables or Disables HTTPs access from WAN || If this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN
</tr>
|-
<tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>SMS text</td>
|-
        <td>SMS text that will trigger the rule</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
|}
        </td>
 
</tr>
<tr>
        <td>Enable HTTP access</td>
        <td>Enables or Disables HTTP access from LAN</td>
        <td>If this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN</td>
</tr>
<tr>
        <td>Enable HTTPS access</td>
        <td>Enables or Disables HTTPS access from LAN</td>
        <td>If this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN</td>
</tr>
<tr>
        <td>Enable remote HTTP access</td>
        <td>Enables or Disables HTTP access from WAN</td>
        <td>If this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN</td>
</tr>
<tr>
        <td>Enable remote HTTPS access</td>
        <td>Enables or Disables HTTPs access from WAN</td>
        <td>If this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>
====Restore to default====
====Restore to default====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the Restore to default function || Allows you to restore the router to it's default settings via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Executes a router reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <td>Enable</td>
|-
        <td>This will enable or disable the Restore to default function</td>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>Allows you to restore the router to it's default settings via SMS</td>
|-
</tr>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
|}
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Executes a router reset, which means the router will reboot after this rule is executed and all custom
            configurations will be deleted and restored to default</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====FW upgrade from server====
====FW upgrade from server====
{| class="mw-collapsible mw-collapsed nd-mantable"
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the FW upgrade from server function || Allows you to upgrade the router‘s FW via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        <td>Enable</td>
|-
        <td>This will enable or disable the FW upgrade from server function</td>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>Allows you to upgrade the router‘s FW via SMS</td>
|-
</tr>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
<tr>
|}
        <td>Action</td>
        <td>The action to be performed when this rule is met</td>
        <td>Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router
            will reboot and be unreachable for a couple of minutes after this rule is executed</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Digital output control====
====Digital output control====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the possibility to change output state || Allows you to change output state via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Changes output state
</tr>
|-
<tr>
| State || The state to which output will be set when this rule is met || If you set it as ON it will turn on output if OFF it will turn it off
        <td>Enable</td>
|-
        <td>This will enable or disable the possibility to change output state</td>
| Active timeout || Rule active for a specified time || If enabled, you can set specific time for how long you want to change output state
        <td>Allows you to change output state via SMS</td>
|-
</tr>
| Seconds || Rule active for a specified time, format seconds || Write time, for how long you want to change output state
<tr>
|-
        <td>Action</td>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter  
        <td>The action to be performed when this rule is met</td>
|-
        <td>Changes output state</td>
| Output type || Type of output which will be activated || Select which output you want to use
</tr>
|-
<tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
        <td>State</td>
|-
        <td>The state to which output will be set when this rule is met</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>If you set it as ON it will turn on output if OFF it will turn it off</td>
|}
</tr>
<tr>
        <td>Active timeout</td>
        <td>Rule active for a specified time</td>
        <td>If enabled, you can set specific time for how long you want to change output state</td>
</tr>
<tr>
        <td>Seconds</td>
        <td>Rule active for a specified time, format seconds</td>
        <td>Write time, for how long you want to change output state</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Output type</td>
        <td>Type of output which will be activated</td>
        <td>Select which output you want to use</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Force SIM switch====
====Force SIM switch====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the Force SIM switch function || Allows SIM switch via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Forces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the message)
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter    
        <td>Enable</td>
|-
        <td>This will enable or disable the Force SIM switch function</td>
| Modem || Select which modem you want to use || Which modem is configured
        <td>Allows SIM switch via SMS</td>
|-
</tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Action</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>The action to be performed when this rule is met</td>
|}
        <td>Forces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the
            message)
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====GPS control====
====GPS control====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This check box will enable or disable the GPS ON/OFF function || Allows you to control GPS via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Turns GPS ON or OFF      
</tr>
|-
<tr>
| State || The state to which GPS will be set when this rule is met || If you set it as ON it will turn on GPS if OFF it will turn it off
        <td>Enable</td>
|-
        <td>This check box will enable or disable the GPS ON/OFF function</td>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter      
        <td>Allows you to control GPS via SMS</td>
|-
</tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Action</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>The action to be performed when this rule is met</td>
|}
        <td>Turns GPS ON or OFF
        </td>
</tr>
<tr>
        <td>State</td>
        <td>The state to which GPS will be set when this rule is met</td>
        <td>If you set it as ON it will turn on GPS if OFF it will turn it off</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====GPS coordinates====
====GPS coordinates====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the GPS coordinates function || Allows you to get GPS coordinates via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Sends you GPS coordinates of the router  
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter      
        <td>Enable</td>
|-
        <td>This will enable or disable the GPS coordinates function</td>
| Modem || Select which modem you want to use || Which modem is configured
        <td>Allows you to get GPS coordinates via SMS</td>
|-
</tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Action</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>The action to be performed when this rule is met</td>
|}
        <td>Sends you GPS coordinates of the router
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Monitoring control====
====Monitoring control====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the Monitoring control function || Allows you to control RMS monitoring status via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Turns RMS monitoring ON or OFF
</tr>
|-
<tr>
| State || The state to which RMS monitoring will be set when this rule is met || If you set is as ON it will turn on RMS monitoring if OFF it will turn it off
        <td>Enable</td>
|-
        <td>This will enable or disable the Monitoring control function</td>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter  
        <td>Allows you to control RMS monitoring status via SMS</td>
|-
</tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Action</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>The action to be performed when this rule is met</td>
|}
        <td>Turns RMS monitoring ON or OFF
        </td>
</tr>
<tr>
        <td>State</td>
        <td>The state to which RMS monitoring will be set when this rule is met</td>
        <td>If you set is as ON it will turn on RMS monitoring if OFF it will turn it off</td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Wake on LAN====
====Wake on LAN====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the Wake on LAN function || Provides the possibility to wake computers from sleep mode
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Wakes the specified computer from sleep mode
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter  
        <td>Enable</td>
|-
        <td>This will enable or disable the Wake on LAN function</td>
| MAC address || Computer's MAC Address || A MAC address of a device you want to wake up
        <td>Provides the possibility to wake computers from sleep mode</td>
|-
</tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Action</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>The action to be performed when this rule is met</td>
|}
        <td>Wakes the specified computer from sleep mode
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>MAC address</td>
        <td>Computer's MAC Address</td>
        <td>A MAC address of a device you want to wake up</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


====Mobile data limit status====
====Mobile data limit status====
{| class="mw-collapsible mw-collapsed nd-mantable"      
----<table class="mw-collapsible mw-collapsed nd-mantable"style="width: 100%">
! FIELD NAME !! DESCRIPTION !! EXPLANATION, NOTES
<tr>
|-
        <th>FIELD NAME</th>
| Enable || This will enable or disable the mobile data limit status function || Allows you to get mobile data limit status via SMS
        <th>DESCRIPTION</th>
|-
        <th>EXPLANATION, NOTES</th>
| Action || The action to be performed when this rule is met || Sends you mobile data limit status
</tr>
|-
<tr>
| SMS text || SMS text that will trigger the rule || SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter  
        <td>Enable</td>
|-
        <td>This will enable or disable the mobile data limit status function</td>
| Modem || Select which modem you want to use || Which modem is configured
        <td>Allows you to get mobile data limit status via SMS</td>
|-
</tr>
| Authorization method || What kind of authorization to use for SIM management || Possible values:No authorization | By serial | By router admin password; Default: '''By router admin password'''
<tr>
|-
        <td>Action</td>
| Allowed users || White list of allowed users || Possible values:From all numbers | From group | From single number; Default: '''From all numbers'''
        <td>The action to be performed when this rule is met</td>
|}
        <td>Sends you mobile data limit status
        </td>
</tr>
<tr>
        <td>SMS text</td>
        <td>SMS text that will trigger the rule</td>
        <td>SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
        </td>
</tr>
<tr>
        <td>Modem</td>
        <td>Select which modem you want to use</td>
        <td>Which modem is configured</td>
</tr>
<tr>
        <td>Authorization method</td>
        <td>What kind of authorization to use for SIM management</td>
        <td>Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
        </td>
</tr>
<tr>
        <td>Allowed users</td>
        <td>White list of allowed users</td>
        <td>Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''
        </td>
</table>


===UCI API rule===
===UCI API rule===

Revision as of 09:21, 15 May 2020

Summary

{{{name}}} routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.

SMS Utilities

Default Rules

The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.

The entire list contains 17 rules but you are also be provided with the possibility to configure custom ones or edit the existing rules.

All default configuration options are listed below:

  • Reboot
  • Send_status
  • Ioset

{{#ifeq:

  • Iostatus


  • VPN (on)
  • VPN (off)
  • VPN status
  • List of profile
  • SSH_access (on)
  • SSH_access (off)
  • Web_access (on)
  • Web_access (off)
  • Firstboot


  • Fw_upgrade
  • RMS status
  • Rms connect
  • Rms action (on)
  • Rms action (off)
  • Monitoring status
  • More

Execution

To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text “reboot”, the router will reboot if the selected Authorization method is “No authorization”. However, if there is an Authorization method present you will need to include the “Authorization key” in the text message. This “Authorization key” depends on the chosen Authorization method, i.e., if the method is “By serial”, the “Authorization key” is the router’s serial number, if the method is “By router admin password”, the “Authorization key” is the router’s admin password.

The "Authorization key” must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is “By router admin password” and the password is “admin01”, the entire message should look like this: “admin01 reboot”. The same applies to “By serial” authorization. By default authorization for SMS utilities are set "By router admin password".

Rule Overview and editing

Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the Edit button next to any SMS Utilities rules. This guide will contain information on editing every single SMS Utilities rule.

SMS rule General settings

SMS rule Authorization settings

File:Networking trb manual mobile utilities reboot Authorization settings v1.png

Above is an example of what SMS Configuration General and Authorization settings windows looks like, specifically, SMS Configuration for the Reboot rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

Reboot

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable SMS reboot function Allows router to restart via SMS
Action The action to be performed when this rule is met Reboots the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Get status via SMS after reboot Check this to receive connection status via SMS after the reboot If enabled, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule
Modem Select which modem you want to use Which modem is configured
Gateway modem Select which modem you want to use Which modem is configured
Message text Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available You can select which status elements to display
Authorization method What kind of authorization to use Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Send status

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable SMS status function Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
Action The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Modem Select which modem you want to use Which modem is configured
Gateway modem Select which modem you want to use Which modem is configured
Message text Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available You can select which status elements to display
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Switch mobile data ON/OFF

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the Switch mobile data function Allows mobile control via SMS
Action The action to be performed when this rule is met Turn mobile data ON or OFF
State The state to which mobile data will be set when this rule is met. If you set it as ON it will turn on mobile data if OFF it will turn it off.
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Modem Select which modem you want to use Which modem is configured
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

SSH access control

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the SSH access control function Allows SSH access control via SMS
Action The action to be performed when this rule is met Turns SSH access ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Enable SSH access Enables or Disables SSH access from LAN If this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
Enable remote SSH access Enables or Disables SSH access from WAN If this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Web access Control

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the Web access control function Allows Web access control via SMS
Action The action to be performed when this rule is met Turns access to WebUI ON or OFF
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Enable HTTP access Enables or Disables HTTP access from LAN If this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
Enable HTTPS access Enables or Disables HTTPS access from LAN If this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN
Enable remote HTTP access Enables or Disables HTTP access from WAN If this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
Enable remote HTTPS access Enables or Disables HTTPs access from WAN If this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Restore to default

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the Restore to default function Allows you to restore the router to it's default settings via SMS
Action The action to be performed when this rule is met Executes a router reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

FW upgrade from server

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the FW upgrade from server function Allows you to upgrade the router‘s FW via SMS
Action The action to be performed when this rule is met Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Digital output control

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the possibility to change output state Allows you to change output state via SMS
Action The action to be performed when this rule is met Changes output state
State The state to which output will be set when this rule is met If you set it as ON it will turn on output if OFF it will turn it off
Active timeout Rule active for a specified time If enabled, you can set specific time for how long you want to change output state
Seconds Rule active for a specified time, format seconds Write time, for how long you want to change output state
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Output type Type of output which will be activated Select which output you want to use
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Force SIM switch

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the Force SIM switch function Allows SIM switch via SMS
Action The action to be performed when this rule is met Forces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the 
           message)
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Modem Select which modem you want to use Which modem is configured
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

GPS control

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This check box will enable or disable the GPS ON/OFF function Allows you to control GPS via SMS
Action The action to be performed when this rule is met Turns GPS ON or OFF
State The state to which GPS will be set when this rule is met If you set it as ON it will turn on GPS if OFF it will turn it off
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

GPS coordinates

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the GPS coordinates function Allows you to get GPS coordinates via SMS
Action The action to be performed when this rule is met Sends you GPS coordinates of the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Modem Select which modem you want to use Which modem is configured
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Monitoring control

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the Monitoring control function Allows you to control RMS monitoring status via SMS
Action The action to be performed when this rule is met Turns RMS monitoring ON or OFF
State The state to which RMS monitoring will be set when this rule is met If you set is as ON it will turn on RMS monitoring if OFF it will turn it off
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Wake on LAN

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the Wake on LAN function Provides the possibility to wake computers from sleep mode
Action The action to be performed when this rule is met Wakes the specified computer from sleep mode
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
MAC address Computer's MAC Address A MAC address of a device you want to wake up
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

Mobile data limit status

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the mobile data limit status function Allows you to get mobile data limit status via SMS
Action The action to be performed when this rule is met Sends you mobile data limit status
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
Modem Select which modem you want to use Which modem is configured
Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

UCI API rule

The UCI rule lets you set or get any parameter from the router's configuration files.

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable the UCI API function Allows you to set or get any configurations from the router
Action The action to be performed when this rule is met. Sets or sends you any specified configurations of the router
SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Detailed explanations on how to use this function are presented in the table below
Modem Select which modem you want to use Which modem is configured
Authorization method What kind of authorization to use for SIM management By serial | By router admin password; Default: By router admin password
Allowed users White list of allowed users From group | From single number; Default: From all numbers

The following are syntax examples for the UCI API rule:

FIELD NAME DESCRIPTION EXPLANATION, NOTES
uci get config.section.option" Returns config option value uci get network.wan.ipaddr - returns the router's WAN IP address
uci set config.section.option="value" Sets config option "uci set network.mobile.apn=example" - Changes mobile APN to example
uci show config Returns the contents of a config file uci show openvpn - returns the contents of the openvpn config file
uci show config.section Returns the exact part of a config file (either section or the exact option value) uci show network.ppp - returns the contents of the ppp interface section from the network config file

As you can see, the UCI rule requires that you know the names of the configuration files and the names of the sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our UCI command usage article.

Custom Rules

If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the Add Rule tab. Write SMS text, select an Action and press the Add button located next to it.

File:Networking trb manual mobile utilities add rule v1.png

Configuring a new rule is very similar to editing default rules: you are provided with a list of Actions, other fields are generated in accordance with which Action you choose.

SMS Gateway

This section is a summary of the SMS Gateway function in {{{name}}} routers.

Post/Get

Post/Get allows you to perform action requests by writing them in the URL after your device’s IP address.

Field Value Description
Enable on; default: off Enable SMS management functionality through POST/GET
Modem Default: Modem 1 Which modem is used
Gateway modem Default: Modem 1 Which modem is used
User name Default: user1 User name used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
Password Default: user_pass Password used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )

Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:

Action Post/get URL examples
View mobile messages list http://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass
Read mobile message http://192.168.1.1/cgi-bin/sms_read?username=user1&password=user_pass&number=1
Send mobile message http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
View mobile messages total http://192.168.1.1/cgi-bin/sms_total?username=user1&password=user_pass
Delete mobile message http://192.168.1.1/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
  • 192.168.1.1 - router's IP address. (Replace it with your [[{{{name}}}_LAN#General_Setup|LAN IP]] or [[{{{name}}}_WAN#Operation_Modes|WAN IP]] (when connecting remotely))
  • SMS related post/get commands. Possible values are:
    • sms_list - view all SMS messages in storage
    • sms_read - read a single SMS message by specified SMS index (number)
    • sms_send - send an SMS message to specified recipient
    • sms_total - display SMS storage statistics
    • sms_delete - delete a single SMS message by specified SMS index (number)
  • & - separation symbol. After specifying the SMS command, other parameters must be separated by an ampersand (&) symbol
  • username - SMS post/get configuration user name
  • password - SMS post/get configuration password
  • number - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be viewed with the sms_list command.
    Correct phone number format is:
    • 00 - number must be preceded by two zeros
    • <country_code> - the next following element is the number holder's country code
    • <receivers_number> - phone number of the recipient
           For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's
       phone number, all preceded by 00)
  • text - SMS message text

Auto Reply

Auto reply allows you to configure automatic replying to SMS messages that the router receives.

Field Value Description
Enable off | on; default: off Toggles Auto Reply ON or OFF
Reply SMS-Utilities rules off | on; default: off It will reply to sms rules, from SMS-Utilities
Don't save received messages off | on; default: off If enabled, the router will delete received SMS messages
Modem Default: Modem 1 Which modem is used
Gateway modem Default: Modem 1 Which modem is used
Mode Default: Everyone Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From user group
Message text Default: " " The message that will be sent in reply

SMS Forwarding

This section is a summary of the SMS Forwarding function in {{{name}}} routers.

SMS Forwarding To HTTP

The SMS Forwarding To HTTP functionality forwards SMS messages to HTTP, using either POST or GET methods.

Field Value Description
Enable off | on; default: off Enable/disable SMS forwarding to HTTP
Forward SMS-Utilities rules off | on; default: off Enable/disable sms-utilities rules forwarding
Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
Include sender's number off | on; default: off Enable/disable adding original message sender phone number at the end of message text
HTTPS certificate verification Default: Ignore Select whether to ignore or verify server certificate. Available options:*Ignore*Verify
Method Default: Get Choose witch HTTP request method will be used. Available options:*Get*Post
URL Default: " " URL to which message is going to be forwarded
Number value name Default: " " Sender phone number code name for query string name/value pair
Message value name Default: " " Message code name for query string name/value pair
Extra data pair 1 Default: " " Extra html query name/value pair. Enter name to the left field and value to right
Extra data pair 2 Default: " " Extra html query name/value pair. Enter name to the left field and value to right
Modem Default: Modem 1 Which modem is used
Mode Default: All messages Choose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group

SMS Forwarding To SMS

The SMS Forwarding To SMS function forwards SMS messages to one or several recipients.

Field Value Description
Enable off | on; default: off Enables/disables SMS forwarding to SMS
Forward SMS-Utilities rules off | on; default: off Enable/disable sms-utilities rules forwarding
Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
Add sender's number off | on; default: off Enable/disable adding original message sender phone number at the end of message text. Only added if total message length is up to 480 characters
Modem Default: Modem 1 Which modem is used
Gateway modem Default: Modem 1 Which modem is used
Mode Default: All messages Choose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group
Recipients phone numbers Default: " " Number(s) to which received messages will be forwarded to

SMS Forwarding To Email

The SMS Forwarding To Email function forwards SMS messages to email.

Field Value Description
Enable off | on; default: off Enables/disables SMS forwarding to Email
Forward SMS-Utilities rules off | on; default: off Enables/disables sms-utilities rules forwarding
Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
Add sender's number off | on; default: off Enable/disable adding sender phone number at the end of email text body
Subject Default: " " Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
Email group Default: " " Sender's email configuration
Recipient's email address Default: " " For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-)
Modem Default: Modem 1 Which modem is used
Mode Default: All messages Choose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group

Call Utilities

Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

Call Configuration

To make a new rule, select what Action you want to make and press Add button.

Every Call rule can be edited to your liking, just click the Edit button. This guide will contain information on editing every single Call Utilities rule.

File:Networking trb manual mobile utilities edit call rule 1.png

Call Configuration window is similar to SMS Configuration, but less complex.

Call Configuration also has similar Authorization settings.

File:Networking trb manual mobile utilities edit call rule auth.png

Reboot

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable call Reboot function Allows router to restart after receiving a call
Action The action to be performed when this rule is met Reboots the router
Get status via SMS after reboot Check this to receive connection status via SMS after the reboot If enabled, the router will send a status message once it has rebooted and is operational again. This is an option under the Call Reboot rule
Modem Select which modem you want to use Which modem is configured
Gateway modem Select which modem you want to use Which modem is configured
Message text Which status information should be included in SMS You can select which status elements to display
Allowed users White list of allowed users From group | From single number; Default: From all numbers

Send status

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable call to receive status function Allows you to get the router‘s status via SMS after calling it. This is both a separate Call Rule and an option under the Call Reboot rule
Action The action to be performed when this rule is met Sends an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
Modem Select which modem you want to use Which modem is configured
Gateway modem Select which modem you want to use Which modem is configured
Message text Which status information should be included in SMS You can select which status elements to display
Allowed users White list of allowed users From group | From single number; Default: From all numbers

Switch mobile data

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable call to switch mobile data ON/OFF Allows mobile data control via call
Action The action to be performed when this rule is met Turn mobile data ON/OFF
State The state to which mobile data will be set when this rule is met. If you set is as ON it will turn on mobile data if OFF it will turn it off.
Modem Select which modem you want to use Which modem is configured
Allowed users White list of allowed users From group | From single number; Default: From all numbers

Switch output

FIELD NAME DESCRIPTION EXPLANATION, NOTES
Enable This will enable or disable call to switch output ON/OFF Allows output state control via call
Action The action to be performed when this rule is met Change output state
State The state to which output will be set when this rule is met If you set it as ON it will turn on output if OFF it will turn it off
Active timeout Rule active for a specified time If enabled, you can set specific time for how long you want to change output state
Seconds Rule active for a specified time, format seconds Write time, for how long you want to change output state
Output type Type of output which will be activated Select which output you want to use
Allowed users White list of allowed users From group | From single number; Default: From all numbers

Messages

With the help of the Messages window you can read and send SMS messages.

Read SMS

In the Read SMS tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should be visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.

File:Networking trb manual mobile utilities read sms v1.png

Send Messages

The Send Messages tab let's you send SMS messages from the router‘s SIM card.

File:Networking trb manual mobile utilities send sms v1.png

All you have to do is enter the recipient’s phone number, type in your message and hit the Send button.


Storage

In the Storage tab you can find settings associated with message storage.

Field Value Description
Save messages on SIM off | on; default: on If this is enabled, messages from SIM card will not be removed after they have been read
Delete forwarded messages off | on; default: off If enabled, all forwarded messages will be automatically deleted
Modem Default: " " Which modem is configured
Sim card memory - Information about used/available SIM card memory
Leave free space Default: 5 How much memory (number of messages) should be left free


[[Category:{{{name}}} Services section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_mobile_utilities&oldid=62525"