RUT300 Remote Monitoring & Administration: Difference between revisions

From Teltonika Networks Wiki
(Created page with "{{Template: Networking_device_manual_remote_management | name = RUT300 | series = RUT | sms = 0 | json = 0 | vpn = 1 | snmp = 1 | modbus = 1 | mqtt = 1 | tr069...")
 
No edit summary
Line 1: Line 1:
{{Template: Networking_device_manual_remote_management
{{Template: Networking_device_manual_remote_management
| name  = RUT300
| name  = RUT300
| series = RUT
| series = RUT30X
| sms    = 0
| sms    = 0
| json  = 0
| json  = 0
| vpn    = 1
| vpn    = 1
| snmp  = 1
| snmp  = 0
| modbus = 1
| modbus = 0
| mqtt  = 1
| mqtt  = 0
| tr069  = 1
| tr069  = 1
| mobile = 0   
| mobile = 0   
}}
}}

Revision as of 07:29, 12 March 2021

Main Page > EOL Products > RUT300 > RUT300 Manual > RUT300 Remote Monitoring & Administration

RUT300 supports multiple monitoring and administration possibilities.

Remote control options

The RUT300 router supports the following remote control capabilities:

Remote control method Can get parameters Can set parameters
RMS
SSH
HTTP
VPN
TR-069

RMS


The Remote Management System (RMS) is designed to conveniently monitor and manage all your Teltonika networking devices. The system allows to securely gather status information of your devices and to change their configuration even if the devices do not have public IP addresses.

RMS access can be configured from the SystemAdministrationRMS page.

Public IP


If your device has a Public IP address (refer here for more information), you can reach the router via HTTP or SSH via its WAN IP address.

HTTP access


Remote HTTP access can be set up via the SystemAdministrationAccess Control page.

SSH access


Remote SSH access can be set up via the SystemAdministrationAccess Control page.


VPN


Virtual Private Networks (VPNs) provide multiple flexible options on setting up remote access to the router and its LAN network. For more information on different types of VPNs supported by RUT300, visit the VPN manual page.


TR-069


Technical Report 069 (TR-069) is a technical specification of the Broadband Forum that defines an application layer protocol for remote management of customer-premises equipment (CPE) connected to an Internet Protocol (IP) network. For more information on TR-069 in RUT300, visit the TR-069 manual page