Difference between revisions of "RUTX08 Firmware Downloads"
From Teltonika Networks Wiki
Line 17: | Line 17: | ||
===<b>[[Media:RUTX_R_00.02.06.1_WEBUI.bin|RUTX_R_00.02.06.1]]</b> | 2021.02.10=== | ===<b>[[Media:RUTX_R_00.02.06.1_WEBUI.bin|RUTX_R_00.02.06.1]]</b> | 2021.02.10=== | ||
− | * | + | * <b>Fixes</b> |
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687 | ** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687 | ||
** Fixed PPTP server interface naming | ** Fixed PPTP server interface naming | ||
Line 27: | Line 27: | ||
===<b>[[Media:RUTX_R_00.02.06_WEBUI.bin|RUTX_R_00.02.06]]</b> | 2020.12.31=== | ===<b>[[Media:RUTX_R_00.02.06_WEBUI.bin|RUTX_R_00.02.06]]</b> | 2020.12.31=== | ||
− | * | + | * <b>New features</b> |
** External Quectel modem support | ** External Quectel modem support | ||
− | * | + | * <b>Improvements</b>: |
** Updated base to OpenWrt 19.07.4 | ** Updated base to OpenWrt 19.07.4 | ||
** Added Phone Groups as possible SMS recipients to SMS Post/Get | ** Added Phone Groups as possible SMS recipients to SMS Post/Get | ||
Line 59: | Line 59: | ||
** Split VLAN configuration page into two separate ones: 'Port Based' and 'Interface Based' | ** Split VLAN configuration page into two separate ones: 'Port Based' and 'Interface Based' | ||
− | * | + | * <b>Fixes</b> |
** Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet | ** Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet | ||
** Fixed occasions when error messages overlap buttons | ** Fixed occasions when error messages overlap buttons | ||
Line 83: | Line 83: | ||
===<b>[[Media:RUTX_R_00.02.05.2_WEBUI.bin|RUTX_R_00.02.05.2]]</b> | 2020.11.19=== | ===<b>[[Media:RUTX_R_00.02.05.2_WEBUI.bin|RUTX_R_00.02.05.2]]</b> | 2020.11.19=== | ||
− | * | + | * <b>Fixes</b> |
** Randomized the global rate limiter to mitigate "SAD DNS" attack | ** Randomized the global rate limiter to mitigate "SAD DNS" attack | ||
===<b>[[Media:RUTX_R_00.02.05.1_WEBUI.bin|RUTX_R_00.02.05.1]]</b> | 2020.09.30=== | ===<b>[[Media:RUTX_R_00.02.05.1_WEBUI.bin|RUTX_R_00.02.05.1]]</b> | 2020.09.30=== | ||
− | * | + | * <b>New features</b> |
** DLNA media server | ** DLNA media server | ||
** iptables NETMAP extension | ** iptables NETMAP extension | ||
Line 100: | Line 100: | ||
** Storage Memory Expansion | ** Storage Memory Expansion | ||
− | * | + | * <b>Improvements</b> |
** Improved WebUI page loading speed | ** Improved WebUI page loading speed | ||
** Added Basic/Advanced mode selection in Setup Wizard | ** Added Basic/Advanced mode selection in Setup Wizard | ||
Line 140: | Line 140: | ||
** Reworked Q-in-Q configuration page | ** Reworked Q-in-Q configuration page | ||
− | * | + | * <b>Fixes</b> |
** Fixed DDNS freeze issues | ** Fixed DDNS freeze issues | ||
** Fixed Firewall Traffic Rules Source and Destination address field validations | ** Fixed Firewall Traffic Rules Source and Destination address field validations | ||
Line 195: | Line 195: | ||
===<b>[[Media:RUTX_R_00.02.04.3_WEBUI.bin|RUTX_R_00.02.04.3]]</b> | 2020.07.31=== | ===<b>[[Media:RUTX_R_00.02.04.3_WEBUI.bin|RUTX_R_00.02.04.3]]</b> | 2020.07.31=== | ||
− | * | + | * <b>New features</b> |
** Backup archive MD5 & SHA256 checksum calculation to help user identify altered backup archives | ** Backup archive MD5 & SHA256 checksum calculation to help user identify altered backup archives | ||
** Package signature check to verify that a package comes from Teltonika | ** Package signature check to verify that a package comes from Teltonika | ||
− | * | + | * <b>Fixes</b> |
** Fixed CVE-2019-17367 | ** Fixed CVE-2019-17367 | ||
** Fixed hiding of configuration pages that users of a specific group don't have read access to | ** Fixed hiding of configuration pages that users of a specific group don't have read access to | ||
Line 206: | Line 206: | ||
===<b>[[Media:RUTX_R_00.02.04.1_WEBUI.bin|RUTX_R_00.02.04.1]]</b> | 2020.07.02 === | ===<b>[[Media:RUTX_R_00.02.04.1_WEBUI.bin|RUTX_R_00.02.04.1]]</b> | 2020.07.02 === | ||
− | * | + | * <b>New features</b> |
** Added USB Tools page with "USB to Serial" and "Printer Server" sections | ** Added USB Tools page with "USB to Serial" and "Printer Server" sections | ||
** Relay control to Call Utilities | ** Relay control to Call Utilities | ||
Line 217: | Line 217: | ||
** During this release a new package was released - [[RUTX08 Package Manager#Available packages|WireGuard]] | ** During this release a new package was released - [[RUTX08 Package Manager#Available packages|WireGuard]] | ||
− | * | + | * <b>Improvements</b>: |
** Improved L2TPv3 functionality with VLAN | ** Improved L2TPv3 functionality with VLAN | ||
** Improved 'Profile Scheduler' with minute accuracy | ** Improved 'Profile Scheduler' with minute accuracy | ||
Line 232: | Line 232: | ||
** General web responsiveness improvements | ** General web responsiveness improvements | ||
− | * | + | * <b>Fixes</b> |
** Fixed random 'I/O Juggler' crashes | ** Fixed random 'I/O Juggler' crashes | ||
** Fixed symlinking tty devices in one place | ** Fixed symlinking tty devices in one place | ||
Line 257: | Line 257: | ||
===<b>[[Media:RUTX_R_00.02.03.4_WEBUI.bin|RUTX_R_00.02.03.4]]</b> | 2020.06.15 === | ===<b>[[Media:RUTX_R_00.02.03.4_WEBUI.bin|RUTX_R_00.02.03.4]]</b> | 2020.06.15 === | ||
− | * | + | * <b>Fixes</b> |
** LED fixes | ** LED fixes | ||
** Fixed config generation script | ** Fixed config generation script | ||
Line 263: | Line 263: | ||
===<b>[[Media:RUTX_R_00.02.03.1_WEBUI.bin|RUTX_R_00.02.03.1]]</b> | 2020.05.15 === | ===<b>[[Media:RUTX_R_00.02.03.1_WEBUI.bin|RUTX_R_00.02.03.1]]</b> | 2020.05.15 === | ||
− | * | + | * <b>New features</b> |
** Responsive WebUI design | ** Responsive WebUI design | ||
** New Access Control window for managing IP access | ** New Access Control window for managing IP access | ||
Line 280: | Line 280: | ||
** NTPD version 4.2.8p14 | ** NTPD version 4.2.8p14 | ||
− | * | + | * <b>Improvements</b>: |
** Added HMAC configurations for OpenVPN | ** Added HMAC configurations for OpenVPN | ||
** Added AES ciphers support for OpenVPN | ** Added AES ciphers support for OpenVPN | ||
Line 310: | Line 310: | ||
** Reworked NTP page, separating general options from NTP specific ones | ** Reworked NTP page, separating general options from NTP specific ones | ||
− | * | + | * <b>Fixes</b> |
** Added name validation in the Firewall → Port Forward page, fixed custom protocol value selection and display | ** Added name validation in the Firewall → Port Forward page, fixed custom protocol value selection and display | ||
** Added validation for GRE 'Remote subnet IP' option | ** Added validation for GRE 'Remote subnet IP' option |
Revision as of 08:38, 28 June 2021
Main Page > RUTX Routers > RUTX08 > RUTX08 Firmware DownloadsThis page contains firmware files for RUTX08 devices. Look to the table below or the changelog to find download links.
To upgrade firmware using WebUI, follow the instructions in RUTX08 Firmware.
RUTX08
File | Type | Release date | Size | MD5 | Changelog |
---|---|---|---|---|---|
RUTX_R_00.07.08.2_WEBUI.bin | Latest FW | 2024.08.12 | 23.35 MB | 96b8a17a6e41c4de9dba356f3192db1b | Link |
RUTX_R_00.07.07.3_WEBUI.bin | Mass production FW | 2024.06.25 | 24.1 MB | 2a178d88cd1ba39057912292dfe714e1 | Link |
RUTX_R_GPL_00.07.08.2.tar.gz | SDK | 2024.08.12 | 79.7 MB | 0fff44388ff3bbba79e639677c7e5417 |
Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.
FW checksums
Checksums for firmware files can be found here.
Changelog
RUTX_R_00.02.06.1 | 2021.02.10
- Fixes
- Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
- Fixed PPTP server interface naming
- Fixed correct client PPTP interface name selection for route creation
- Fixed adding helper to firewall's wan zone when enabling PPTP configuration
- Added package size checking when manually installing a package
- Fixed 'New Firmware Available' message display after firmware upgrade
RUTX_R_00.02.06 | 2020.12.31
- New features
- External Quectel modem support
- Improvements:
- Updated base to OpenWrt 19.07.4
- Added Phone Groups as possible SMS recipients to SMS Post/Get
- Added PSK support for MQTT Broker/Publisher
- Changed Output Scheduler structure
- Removed limitation of one configuration per Input
- Added multiple modem support for TR-069
- Fixed parsing user uploaded custom OpenVPN configuration files containing carriage returns
- Added iptables conntrack flush on WAN Failover if IPsec is enabled
- Optimized package responsible for sending/receiving GRE Tunnel keepalive packets
- Added extra error checking to Package Manager when downloading packages
- Added data usage info for both SIM cards to RMS
- Added logging to syslog when Ping/Wget Reboot "Action" is set to 'None'
- Improved display of configuration tables when a lot of information is shown
- Renamed MODBUS strings to uppercase
- Added redirect to configuration page after a new configuration is created with the 'Add' button
- Added option to create a Configuration Profile from current configuration
- Added data validation to Profiles Scheduler fields
- Replaced the Firewall 'Helpers' page with conntrack helper configuration for each firewall zone
- Increased dynamic list maximum amount of values to 50
- Added the possibility to save email accounts without entering email username and password
- Unified device access password validations
- Expanded DDNS validation for domain input to accept emails
- Moved all USB related services to the 'Services -> USB Tools' page
- Added 'General' page to 'Services -> USB Tools'; the page contains a list of all USB devices and the option to safely unmount the devices
- Added 'passive-interface' and 'default-information' options to the OSPF configuration page
- Added NHRP dynamic route status page
- Split VLAN configuration page into two separate ones: 'Port Based' and 'Interface Based'
- Fixes
- Fixed IPsec Passthrough subnet/ip value parsing to make it dynamic for leftsubnet
- Fixed occasions when error messages overlap buttons
- Fixed I/O state saving after revert back to original state
- Fixed IPsec connection after reboot
- Fixed bridged interface configuration for L2TPv3
- Removed trailing newlines in returned SNMP strings
- Fixed Events Reporting waiting to send email before rebooting
- Fixed MQTT MODBUS Gateway not working when topics have special characters
- Swapped pin3 and pin4 values in MQTT Publisher
- Added an 'IP4Table' option to advanced interface configuration
- Fixed an issue where User Scripts were being deleted after device reboot
- Fixed various WebUI validation bugs, typos, option hints & alignments
- Fixed a bug that caused an internal sever error after logging in with a username that contained special characters
- Fixed crashes that occur after configuration files are not correctly generated
- Fixed a Firewall Port Forwarding bug which caused an internal sever error when no 'Protocol' was selected
- Fixed changing WebUI mode bug while current page is accessed with POST method
- Fixed password allowed lengths and tooltips
- Fixed mountpoint display
- Fixed erroneous data usage display of external modem after it's been disconnected
RUTX_R_00.02.05.2 | 2020.11.19
- Fixes
- Randomized the global rate limiter to mitigate "SAD DNS" attack
RUTX_R_00.02.05.1 | 2020.09.30
- New features
- DLNA media server
- iptables NETMAP extension
- "Flush connections on" option for WAN Failover
- New firmware notifications
- Updated header logo from 'Teltonika' to 'Teltonika | Networks'
- SQM QoS
- USB Tools
- USB to Serial adapter support
- Auto format USB storage devices to NTFS
- Storage Memory Expansion
- Improvements
- Improved WebUI page loading speed
- Added Basic/Advanced mode selection in Setup Wizard
- Added a dropdown with a search function for time zone selection
- Added "copy to clipboard" button in Cloud Solutions next to MAC and Serial
- Added option to send all Modbus records in one packet
- Disabled IPV6 services on LAN by default
- Added password hashing in Post/Get pages
- Added a warning message about rebooting the device while certificate files are being generated
- Added status option to uploaded custom OpenVPN configuration file
- No longer showing "Enable OpenVPN config from file" option if "Enable external Services" is selected
- Added some missing placeholder values
- Added warning message about unsaved changes when leaving Auto Reboot, Periodic Reboot, Wireless pages
- Added port selection to SSTP configuration
- Changed Periodic Reboot service name to Reboot Scheduler
- Added table row highlights on hover
- Changed section name from 'Email users' to 'Email accounts' in the Recipients page
- Added network interface automatic assignment to firewall zones when interface protocol is switched
- Adjusted Azure validations
- Adjusted Local/Remote subnet field validations
- Adjusted Hotspot field validations
- Unified VPN overview section option names and titles
- Removed mandatory requirements for inter-zone forwarding source & destination options in Firewall zone configuration
- Added placeholder values for drop down options in Routing pages
- Increased maximum package upload size
- Removed mobile interfaces from Hotspot configuration
- Added "Passthrough subnets" option to IPsec configuration page
- Added package size checking when installing packages via Package Manager
- Optimized switching between Basic and Advanced WebUI modes
- Added missing services to Events Reporting page when selected Event is "Config change"
- Improved general web design, ordering and positioning
- Added word wrap in the Unsaved Changes page
- Centered 'Apply' button in the Profiles page
- Hid network interfaces with DHCPv6 protocol in Overview page while in Basic WebUI mode
- Changed tcpdump "Select storage" option value from 'Internal storage' to 'RAM memory' in the System → Administration → Troubleshoot page
- Added more descriptive error messages when connection to FOTA server fails
- Updated "Local address" hint in l2tpv3 page
- Added network selection option in Traffic logging page
- Reworked Q-in-Q configuration page
- Fixes
- Fixed DDNS freeze issues
- Fixed Firewall Traffic Rules Source and Destination address field validations
- Started using more stable, builtin ar82xx switch driver
- Symlinking tty devices in one place
- Fixed period when sending packet curl timeouts in Modbus Data Sender
- Fixed "active SIM" register value retrieval after regression in Modbus TCP Slave
- Fixed Hotspot 'Trial access' function
- Fixed OpenVPN TLS Cipher display and added a limit to number of ciphers
- Fixed various WebUI validation bugs, typos & option hints
- Fixed DHCP lease range validation and value saving in Interfaces page
- Fixed error messages when creating interfaces with incorrect names
- Fixed various section toggling bugs
- Fixed username validation in SNMP page
- Fixed certificate file importing bugs & common name display in Certificates Manager page
- Fixed interface option related to IPv4 and IPv6 in Routing pages
- Fixed OpenVPN multi-line command that adds client specific parameters
- Fixed DHCP lease range validation in Basic mode
- Fixed incorrect sorting in dynamic tables
- Fixed routing table writing and deleting
- Fixed incorrectly displayed type when no protocol is selected
- Removed Wireguard interfaces from the Interfaces page
- Fixed SNMP user access mode display in SNMPV3 Users Overview page
- Fixed SNMP memory leak on chilli module
- Fixed MD5 and SHA256 checksum calculations
- Fixed DHCP-options field validation to allow separating parameters with commas
- Fixed Package Manager side menu entry updates right after package upload
- Fixed Wireguard port selection
- Fixed VPN zone status display
- Fixed lua errors when Start/End time option is empty
- Fixed incorrectly displayed OpenVPN protocol
- Fixed Lua errors in Profile Scheduler and Firewall Zones
- Removed /log folder from Troubleshoot file directories
- Fixed endless spinner when applying profiles
- Fixed nil value in the Traffic Logging page
- Fixed "Units" option dependency on "Enable DHCP" option in the Setup Wizard's LAN page
- Fixed redirecting to login page after factory setting restore (reset)
- Removed Unsaved Changes notification when downloading Troubleshoot/tcpdump files from the System → Administration → Troubleshoot page
- Vulnerability fixes for Package Manager and Certificates Manager pages
- Fixed Firewall zone placeholder (removed "-- Please select --" and left "Unspecified")
- Fixed update from server option in the Firmware page
- Added missing error messages when password is invalid in default password change page
- Fixed "Lease time" option in the Setup Wizard's LAN page
- Fixed error 500 when accessing Advanced pages while in Basic mode
- Increased allowed character lengths for MQTT Broker and Data to Server
- Fixed XSS vulnerabilities in package manager and package file upload pages
- Fixed incorrect OpenVPN configuration saving
- Fixed NHRP lua error
- Removed "Wireguard" from Status → Services display if it is not installed
- Fixed Hotspot login page signup fields and notifications
- Removed Hotspot 2.0 page
- Removed Phone Groups page
RUTX_R_00.02.04.3 | 2020.07.31
- New features
- Backup archive MD5 & SHA256 checksum calculation to help user identify altered backup archives
- Package signature check to verify that a package comes from Teltonika
- Fixes
- Fixed CVE-2019-17367
- Fixed hiding of configuration pages that users of a specific group don't have read access to
- Fixed firmware upload script
RUTX_R_00.02.04.1 | 2020.07.02
- New features
- Added USB Tools page with "USB to Serial" and "Printer Server" sections
- Relay control to Call Utilities
- 'Certificates' page for generating and managing TLS certificates
- 'Drag & Drop' support for Overview page tables
- 'Speed Test' feature
- AVL I/O support
- Added JSON formatting option to Data to Server
- Added timeout and keep-connection options to Modbus TCP Slave
- During this release a new package was released - WireGuard
- Improvements:
- Improved L2TPv3 functionality with VLAN
- Improved 'Profile Scheduler' with minute accuracy
- Reordered VPN configuration options
- Standardized section header styles
- Unified spelling of dropdown values
- Added information about 'Package Manager' packages before updating firmware
- Updated services management to Status → Services page
- Improved performance of firmware upgrades from server
- Improved security features related to file uploading and HTTP headers
- Changed RAM/flash memory units from MiB to MB
- Updated warning message and lease deletion message for static leasing
- Moved 'Country code' option to general tab
- General web responsiveness improvements
- Fixes
- Fixed random 'I/O Juggler' crashes
- Fixed symlinking tty devices in one place
- Fixed validations and option saving in OSPF page
- Fixed various element positioning bugs on smaller screens
- Fixed switching to advanced mode notification when accessing non existing pages
- Fixed validations in Traffic Logging page
- Fixed showing failover section only for interfaces with failover rules
- Fixed static leases redirect after saving
- Fixed empty dropdown values in 'I/O juggler' and 'Network Shares'
- Fixed interface IP address validation in DDNS page
- Fixed various spelling mistakes
- Fixed broken address option in the 'Troubleshoot' page
- Fixed dropdown select element double clicking issue
- Fixed basic/advanced mode switching with Microsoft Edge browser
- Fixed firmware upgrading bug when LAN interface with a changed name exists
- Fixed redirecting to the 'Interfaces' page when mode is changed from basic to advanced and user is in the 'LAN' or 'WAN' pages
- Fixed validation of custom header in 'Data To Server' page
- Fixed "Type" option error in Failover page
- Updated username and password validations
- Fixed profile change action in 'I/O Juggler'
- Fixed bidirectional GPIO change feature
RUTX_R_00.02.03.4 | 2020.06.15
- Fixes
- LED fixes
- Fixed config generation script
RUTX_R_00.02.03.1 | 2020.05.15
- New features
- Responsive WebUI design
- New Access Control window for managing IP access
- Attack Prevention page under Firewall settings
- New IPv6 options in WAN, LAN and VPN pages
- Progressive Web Application support and extra page caching when device is configured with a valid SSL certificate
- OpenVPN configuration file upload functionality
- Unsaved Changes page
- Input inversion buttons
- Dynamic switch port display in side widget
- Input/Output manipulator
- MQTT Publisher: added support to send I/O values
- Ability to install packages stored in backup file
- New Modbus TCP Slave register fields
- New Modbus Alarm redundancy options
- NTPD version 4.2.8p14
- Improvements:
- Added HMAC configurations for OpenVPN
- Added AES ciphers support for OpenVPN
- Added DHCP lease range display in the Network → LAN page
- Added warning messages when deleting interfaces/configurations
- Added available FW on server status messages in FW upgrade page
- Changed UPnP redirect delete button style
- Changed functionality of reset button in the Firewall → Custom Rules page. Now fully resets to default
- Added hints on all value fields about field validation
- Removed modem traps if no modem is present
- Optimized section toggling logic, removing all toggling associated flags required prior optimization
- Standardized section edit page headers in WebUI Services
- Improved the look of error pages and messages
- Updated Wiki links to wiki.teltonika-networks.com
- Disabled 'Clear data limit' button for inactive interfaces
- Reordered menu, moved 'Default configuration' to the Backup page, moved 'Diagnostics' to the Troubleshoot page
- Added credentials input fields to Data to Server
- Changed hint of 'Allow guest" in the Network Shares page
- Updated Periodic Reboot service status in the Services page
- Improved hint for incoming calls option
- Changed OpenVPN LZO option to a dropdown with an extra 'none' option
- Added suggestion to create a profile if there are no profiles created in the Profiles → Scheduler page
- Filtered out unnecessary interfaces ending with _4 _6 in firewall page
- Moved SIM switch to separate page and added check interval and retry count options
- Changed side widget button color to blue to make it more visible
- Added 'Dynamic List' option limit (20 elements)
- Improved stm32 recv message handling
- Modbus TCP test now allows reading more than 125 coils/inputs
- Reworked NTP page, separating general options from NTP specific ones
- Fixes
- Added name validation in the Firewall → Port Forward page, fixed custom protocol value selection and display
- Added validation for GRE 'Remote subnet IP' option
- Fixed Schedulers' cells to be of equal width
- Fixed uploading backup from lower firmware version
- Fixed SSTP certificate upload function
- Fixed IPsec 'Aggressive' setting value saving in config file
- Fixed LAN settings static lease name validation
- Fixed descriptions in Access Control → Security page
- Fixed HTTP login while HTTPS session is still active
- Fixed real time CPU load in the Overview page
- Fixed advanced static routing display for all routes
- Fixed file upload error messages in backup page
- Fixed 'Select' option for Firefox browser
- Fixed RAM usage display in side widget
- Fixed access to non existing pages
- Fixed saving empty message field in Events Reporting rules
- Fixed I/O socket pinout
- Fixed Events Reporting send test email page display when email contains 2 new lines in a row
- Fixed LAN Overview section display
- Fixed early login page load after reboot or backup upload
- Fixed Package Manager notification display
- Fixed PPTP and L2TP client configuration creation with same name
- Fixed static route removal if corresponding interface is removed
- Fixed Realtime Graphs → Traffic tab display
- Fixed OpenVPN username and password writing to file
- Fixed time zone sync between Setup Wizard & NTP pages
- Fixed DHCP lease range validation
- No longer write anything into Events Log when forcing reboot to prevent device hang-up
- Fixed restore settings when upgrading from Yocto base firmware on TRB1 targets
- Fixed launching stm32 autoflash script at early boot to avoid possible keep settings loss
- Removed certain Events Reporting options on devices that don't have the corresponding functionality
- Fixed recovery from lost connection for MQTT publisher, Modbus MQTT gateway
- Resolved using SHA512 bug for versions 02.01 or lower with additional (-b) parameter
RUTX_R_00.02.01.1 | 2020.01.15
- New features:
- Email to SMS
- Static IP lease
- SMS OTP and MAC auth in Hotspot
- Hotspot logs
- TOS in HotSpot
- Custom URL parameters while using external landing page in Hotspot
- Expiration time for Hotspot
- Wireless status page
- USB mount settings
- Site blocking list from file
- Events Reporting via Email
- STunnel
- Multi-User support
- Mobile page
- Operators control
- Bluetooth passive device scanning
- Hotspot 2.0
- Modbus MQTT gateway
- Package manager
- RUT FOTA
- TR-069
- Improvements:
- Deleted OpenVPN forward rule on instance deletion
- Improved "SMS Forwarding to Email" field validations
- Rename IPsec fields from right/left to remote/local
- Bluetooth style improvements
- Applied same style on all scheduler templates
- Renamed "Setup Wizard" steps
- Renamed "IPv4 and IPv6 routes" headings
- Renamed "User groups" to "Users & Recipients"
- Added "Clear data limit" on a specific date
- Enable/Disable all SMS-Utilities rules at once
- Fixes:
- Fixed WAN mobile interfaces reload
- Fixed parsing interface IP address in WAN
- Fixed OSPF "Hello Interval" field hint
- Fixed field validation on "Port Forward" create form
- Fixed display build date
- Removed "Bring up on boot" option
- Fixed Mobile page with additional USB modem
- Fixed creating SNAT rule without port
- Fixed SDK archive name
RUTX_R_00.02.00.2 | 2019.10.11
- Fixes:
- WiFi fix
RUTX_R_00.02.00.1 | 2019.09.27
- New features:
- Auto APN
- MQTT
- Web Filter
- Dynamic Routes
- GRE over IPsec
- Wireless Hotspot
- VRRP
- HTTP POST/GET
- Network Shares
- VLAN multiple tags functionality
- SMS HTTP POST/GET
- SMS Forwarding
- Auto Reply
- SMS storage
- Switch back to primary SIM
- Email groups
- Default VPN firewall zones
- Support for XT25F128B spi-nor memory
- Support for Bluetooth
- Improvements:
- Updated Kernel to version 4.14.131
- Updated Strongswan to version 5.8.0
- Updated curl to version 7.60.0.4 (fixes CVE-2018-14618, CVE-2018-16839, CVE-2018-16840, CVE-2018-16842, CVE-2019-3823, CVE-2019-3822, CVE-2018-16890)
- Updated mosquitto to version 1.5.8
- Updated dnsmasq to version 2.80
- Updated iptables to version 1.6.2
- Updated openssl to version 1.0.2s
- Updated zlib to version 1.2.11
- Updated hostapd to the 2018-05-21 version (fixes CVE-2019-9494, CVE-2019-9495, CVE-2019-9496, CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, CVE-2019-11555)
- Updated fstools to the 2019-03-28 version
- Updated procd to the 2018-03-28 version
- Updated rpcd to the 2018-11-28 version
- Updated ubox to the 2018-02-14 version
- Updated ubus to the 2018-10-06 version
- Updated uci to the 2019-05-17 version
- Updated Firewall to the 2018-08-13 version
- Updated netifd to the 2019-01-31 version
- Updated uhttpd to the 2018-11-28 version
- Switched to mac80211 WiFi driver
- Updated IPsec page
- Updated DMVPN page
- Updated Overview configuration page
- Fixes:
- Fixed operator name parsing
- Fixed serial reading
- Fixed SIM card PIN code setting
- Fixed I/O event handling
- Fixed backup save after device restart
- GPS init script fixes
- IPsec page rework
- Failover/Load Balancing mobile interface fixes
- L2TP/PPTP/SSTP configuration fixes
- TX power save setting fixes
- Refactored profiles functionality
- Added write to config option in Call Utilities
- Wireless config migration fix
- Firmware checksum fix
RUTX_R_00.01.06 | 2019.07.24
- New features:
- Added Wake on LAN feature
- Added SSTP VPN support
- Added mobile bridge feature
- Added Status → Network page
- Added SIM Switch feature
- Added SMS Limit feature
- Added save and restore SIM PIN code from flash
- Added feature to monitor switch port events
- Added Events Reporting send to RMS functionality
- Added FOTA support for RUTX08, RUTX10, RUTX11
- Added Modbus TCP master function
- Improvements
- Added microcontroller version information
- Updated Wireless page design and WiFi widget in overview page
- Updated Overview widget style
- Updated stm32 firmware
- Updated LED logic
- Changed check for new FW logic
- WebUI style updates
- Fixes:
- Fixed multiwan function. Changed firewall traffic control to routing rules control
- NTP time zone display fix
- LED functionality fix
- Changed time function used for rollback timestamps
- Login form updated and other fixes
- Fixed firmware update checksum mismatch
- lua error on map when GPS is disabled fix
- Firmware update percentage and check box fix
- LAN interface creation with short names fix
- WAN state and IP print fixes
- OpenVPN new port save in firewall rule fix
- RUT FOTA bug fixes
RUTX_R_00.01.04.5 | 2019.06.14
- Improvements:
- Revert settings logic updated
- Fix:
- Firmware update checksum mismatch fix
- DHCP dnsmasq fix
- Wireless improvements and bug fixes
- Increased RMS HTTP Proxy resource limit
RUTX_R_00.01.04.1 | 2019.05.17
- New features:
- Add initial wireless support
- Added SNMP support
- Added Advanced Routing functionality
- Added L2TP VPN
- Added PPTP VPN
- Improvements:
- Added signal strength logging and reporting to Events Log
- Added authentic firmware check
- OpenSSL updated to version 1.0.2r
- Fixes:
- Wireless improvements and bug fixes
- Fixed IPSec Phase 1 and Phase 2 keys lifetime not saving bug
- Input Output improvements and bug fixes
- Fixed router values sent from SMS utilities
- WebUI style fixes
- Fixed RMS proxy multiform submits
RUTX_R_00.01.03 | 2019.04.25
- New features:
- Adapted WebUI for RUTX08
- Added DMVPN support
- Added HTTP support
- Added SMS message input field validation and counter
- Added UPnP support
- Added GRE Tunnel support
- Implemented dynamic routing with BGP, OSPF, RIP, EIGRP and NHRP protocols
- Added manual network band lock support
- Added Events Log
- Added Events Reporting
- Improvements
- Updated OpenVPN client count to 20
- WebUI style updates
- Fixes:
- Profile scheduler fixes
- Mobile service crash fix
- Ping Reboot IP field validation fix
- LED functionality related fixes
RUTX_R_00.01.02 | 2019.03.19
- New features:
- Added configuration profiles
- Updated WebUI style
- Added Reboot button
- Improvements:
- curl updated to version 7.64.0
- openssl updated to version 1.0.2q
- dropbear updated to version 2018.76
- busybox updated to version 1.28.3
- ustream-ssl updated to latest version
- OpenVPN updated to version 2.4.6
- OpenVPN-Easy-RSA updated to version 3.0.4
- ubus updated to version 2018-10-06
- uhttpd updated to version 2018-11-28
- NTP updated to version 4.2.8p12
- Fixes:
- Root CA validation and page style fixes
- Hardware compatibility check fix
- DDNS force IP renew fix
- Site Blocking enable column fix
- Don't show rules in Load Balancing mode when in failover page fix
RUTX_R_00.01.01 | 2019.02.05
- New features:
- Initial firmware release