RUT300 Firmware Downloads: Difference between revisions

Revision as of 09:04, 19 July 2021

Main Page > EOL Products > RUT300 > RUT300 Firmware Downloads

This page contains firmware files for RUT300 devices. Look to the table below or the changelog to find download links.

To upgrade firmware using WebUI, follow the instructions in RUT300 Firmware.

RUT300

File	Type	Release date	Size	MD5	Changelog
RUT30X_R_00.07.10.2_WEBUI.bin	Latest FW	2024.11.04	10.31 MB	e99fe5444b368da8f24502870cf87308	Link
RUT30X_R_00.07.09.4_WEBUI.bin	Mass production FW	2024.10.02	10.25 MB	a26920e48ea0a2f0965e3cbe7e0b1e12	Link

RUT30X_R_GPL_00.07.10.2.tar.gz

SDK

2024.11.04

18.7 MB

c0531855c1ea88e4ad518219820ca7d8

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

FW checksums

Checksums for firmware files can be found here.

Changelog

RUT30X_R_00.07.00 | 2021.07.16

New features
- New WebUI based on Vue.js 2.6.12
- RutOS updated to OpenWrt 19.07.7 base
- DNP3 Master and DNP3 Oustation

Improvements
- Updated firewall to release 3
- Updated kernel to version 4.14.221
- Updated uhttpd to version 2020-10-01
- Updated xtables-addons to release 9
- Updated mwan to version 2.8.14
- Updated pcre to version 8.44
- Updated curl to version 7.74
- Updated sqlite to version 3.33
- Updated ncurses to version 6.2
- Updated OpenSSL to version 1.1.1k
- Added full MODBUS register address expansion specifier for Data to Server
- Added full MODBUS register address legend
- Added Client ID option for the MQTT protocol in Data to Server
- Improved Data to Server sleeping accuracy
- Improved Data to Server username validation; now space is allowed
- Added firmware version OID to the SNMP service
- Added IP address family option field to the SNMP page
- Added SNMPv6 section to the SNMP Communities page
- Renamed the 'System -> Users' page to 'System -> System Users'
- Moved password changing option to the 'System -> System Users' page
- Switched to ar8216 driver
- Added IPsec XAUTH support
- Improved OpenVPN updown, init scripts to write info about instance in JSON
- Added AES-256-GCM encryption support to OpenVPN
- Added extra configuration parameters to DMVPN
- Added PSK conversion to DMVPN and single PSK types
- Improved Package Manager package installation, deletion and dependencies
- Improved Package Manager download process over FOTA
- Added new Input/Output values manageable over RMS
- Added IPv6 traffic logging
- Made 'Network -> Failover' and 'Network -> Interfaces' page data draggable on multiple browsers
- Added Input/Output Post/Get URL parameter t_time changing delay and time to seconds or miliseconds
- Added support for multiple USB to Serial adapters
- Added peer groups to BGP access list dropdown
- Added TCP MD5 authentication support for BGP

Fixes
- Added glib2 patch to fix CVE-2019-13012 vulnerability
- Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
- Added WolfSSL patch to fix CVE-2021-3336 vulnerability
- Added Busybox patch to fix CVE-2018-1000500 vulnerability
- Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
- Fixed Android clients IPsec MTU/MSS size
- Fixed wrong IPsec DPD value saving
- Changed IPsec PSK maximum length to 128 symbols
- Fixed SSTP remaining up after package removal
- Fixed DMVPN crypto_proposal write to config
- Fixed I/O Juggler's SMS sending to correct group
- Fixed I/O Scheduler's relay state issue
- Added I/O direction check while changing IOs via I/O Post/Get
- Fixed float endianness mismatch on some devices MODBUS TCP Master, MODBUS Serial Master
- Fixed UPnP issue that caused config changes to apply only after service restart
- Fixed WebUI files caching when upgrading firmware
- Fixed WebUI date display format
- Fixed MODBUS returning incomplete MAC address data
- Fixed 'Over IP' serial type's UDP issue in client mode
- Fixed DLNA connections count total in statistics page

RUT30X_R_00.02.06.1 | 2021.02.10

Fixes
- Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
- Fixed PPTP server interface naming
- Fixed correct client PPTP interface name selection for route creation
- Fixed adding helper to firewall's wan zone when enabling PPTP configuration
- Added package size checking when manually installing a package
- Fixed 'New Firmware Available' message display after firmware upgrade

RUT30X_R_00.02.06 | 2020.12.31

New features
- Initial RUT300 Firmware

@@ Line 33: / Line 33: @@
 ** Updated ncurses to version 6.2
 ** Updated OpenSSL to version 1.1.1k
-** Added glib2 patch to fix CVE-2019-13012 vulnerability
-** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
-** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
-** Added Busybox patch to fix CVE-2018-1000500 vulnerability
-** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
 ** Added full MODBUS register address expansion specifier for Data to Server
 ** Added full MODBUS register address legend
@@ Line 65: / Line 60: @@
 * <b>Fixes</b>
+** Added glib2 patch to fix CVE-2019-13012 vulnerability
+** Added ntfs-3g patch to fix CVE-2019-9755 vulnerability
+** Added WolfSSL patch to fix CVE-2021-3336 vulnerability
+** Added Busybox patch to fix CVE-2018-1000500 vulnerability
+** Added netifd, odhcp6c IPv6 routing loop on point-to-point links patches to fix CVE-2021-22161 vulnerability
 ** Fixed Android clients IPsec MTU/MSS size
 ** Fixed wrong IPsec DPD value saving
 ** Changed IPsec PSK maximum length to 128 symbols
-** Fixed SSTP remainin up after package removal
+** Fixed SSTP remaining up after package removal
 ** Fixed DMVPN crypto_proposal write to config
 ** Fixed I/O Juggler's SMS sending to correct group