RUT230 Firmware Downloads

From Teltonika Networks Wiki
Main Page > EOL Products > RUT230 > RUT230 Firmware Downloads

FW downloads

This page contains various firmware versions for RUT2xx devices.

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.

Firmware Version Changelog
Latest FW RUT2XX_R_00.01.12.2 2020.05.08

FW checksums

A list of firmware checksums for RUT2xx firmwares uploaded in this page: checksum list

Notes



Changelog

RUT2_R_00.07.04.2 | 2023.04.18

  • New
    • nftables support
  • Improvement
    • Network
      • Added PDP profile registry and LTE SMS format functions & management for the Verizon network
      • Improved SIM detection algorithm
      • Improved Multi-APN connection establishment time
    • WebUI
      • Improved Overview page performance
    • System
      • Changed hostname to router name
      • Updated OpenSSL to version 1.1.1t
      • Updated CA certificates to version 20211016
      • Updated libiwinfo to version 2022-08-19
  • Fix
    • Network
      • Fixed IPv4, IPv6 mobile connection restarts
      • Fixed operator scanning when mobile interface is disabled
      • Fixed data limit and tracking when software flow offloading is enabled
      • Added network reload call before bringing the mobile interface up
      • Fixed Port-based VLAN ID calculation issue
      • Fixed PDP context authentication when using special characters
    • Services
      • Fixed event text for configurable inputs/outputs on I/O Juggler
      • Fixed I/O PIN3 value not changing via MODBUS TCP
      • Added I/O status request error handling in various WebUI pages when the I/O service is booting up
      • Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
      • Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
      • Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
      • Fixed OpenVPN keep alive setting migration issue
      • Fixed PPTP server name setting migration issue
      • Fixed missing WebUI issue caused by Email Relay installation
      • Fixed NTP's Operator Station Synchronization memory leak issue
      • Fixed test email validation
    • System
      • Fixed libcares vulnerability CVE-2022-4904
      • Fixed frr vulnerability CVE-2022-37035
      • Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
      • Removed ability for non root users to edit scripts that get executed as root

RUT2_R_00.07.04.1 | 2023.03.24

  • Fix
    • Network
      • Fixed Data Limit issue

RUT2_R_00.07.04 | 2023.03.07

  • Improvements
    • WebUI
      • Improved data persistence between page refreshes
      • Improved page navigation behavior
      • Improved redirect logic to open configuration edit modals
      • Updated the 'Status -> Mobile' page
      • Updated interface card in the Overview page
      • Separated Sent and Received data bars on the chart in the Mobile Usage page
    • Network
      • Added an info message displayed when a faulty SIM card is inserted
      • Added ResIOT operator's APNs to the APN database
      • Improved mobile connection re-establishment after reboot
      • Improved mobile connection recovery in cases where it was lost unexpectedly
      • Improved 'Deny data roaming' operation when switching between operators
      • Changed default WiFi AP cipher to CCMP (AES)
      • Added the logging of MAC addresses rejected by a WiFi AP
    • Services
      • Added MQTT support to I/O Juggler
      • Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
      • Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
      • Added argument support for the 'Execute custom script' SMS rule
      • Added a frequency option 'schedule' Modbus Master
      • Added pagination to Events Reporting overview
      • Added limit to Events Reporting rule list
      • Added email logging for Events reporting
      • 'Sync with browser' button in the NTP page now also synchronizes the time zone
      • Added a limit of 30 for NTP instances
      • Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
      • Added "make before break" option to IPsec configuration
      • Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
      • Improved MODBUS Master connection handling to reduce connection count
      • Updated modbus request error messages
      • Added OpenVPN server ip block support
      • Added MQTT support for MODBUS Master alarms
      • Added the possibility to get the device's Ethernet port data via SNMP
    • System
      • Updated bash to version 5.1.16
      • Added detailed FW update failure error message to Events Log
      • Improved firmware upload/validation error messages
      • Updated Turkish language support
      • Added protocol column to IP block page
      • Added "vpns.log" file to the Troubleshoot package
      • Added Wireguard tunnel information to the Troubleshoot package
      • Updated default admin group access rights
      • Updated DFOTA notification to show "More info" only when the update is forced
  • Fix
    • WebUI
      • Fixed MAC address showing on mobile interfaces
      • Fixed mobile cell ID displaying in hexadecimal
      • Fixed mobile data limit card creation in the Overview page
      • Fixed modem widget disappearing from the Overview page
      • Fixed Services page not displaying data after Thingworx package is installed
    • Network
      • Fixed interface priority change issue
      • Fixed a Custom Firewall Rule editing issue
      • Fixed DMZ configuration saving while it is disabled
      • Fixed Port Scan script execution failure
      • Fixed Firewall zone duplication issue
      • Fixed call function when VoLTE is disabled
      • Fixed VoLTE control when IMS is not enabled
      • Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
      • Fixed APN authentication when using empty credentials
      • Fixed manual APN selection from list
      • Fixed disabled WiFi interface after factory reset
      • Fixed WiFi interface creation with SAE mixed encryption
    • Services
      • Fixed I/O Scheduler overlapping instances issue
      • Fixed Input/Output image pin colors
      • Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
      • Fixed WiFi Hotspot landing page uploaded theme image display
      • Fixed WiFi Hotspot trial user deletion issue
      • Fixed WiFi Hotspot service crash when associated WiFi interface is not up
      • Fixed WiFi Hotspot password request by SMS
      • Fixed WiFi Scanner starting process when the WiFi interface is disabled
      • Added limitations on message size and quantity of email messages in Email to SMS
      • Fixed SMTP HELLO value parsing issue
      • Fixed SMS message window reset button
      • Fixed not being able to save empty 'Message text' field in Auto Reply
      • Fixed multi-part SMS concatenation
      • Fixed multi-part SMS processing
      • Fixed SMS error message on 'Mobile Data Reset' action
      • Fixed Data To Server JSON format %n, %N and %s flag issues
      • Fixed Events Reporting email data clean
      • Fixed Events Reporting missing config selections
      • Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
      • Fixed IPsec instance deletion after removing DMVPN package
      • Fixed IPSec migration via Backup file when DMVPN is configured
      • Fixed IPsec naming issue when the includes an equals sign
      • Fixed L2TP client to use correct interface on failover events
      • Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
      • Fixed MODBUS database size limiting issue
      • Fixed MODBUS MQTT Gateway client ID input
      • Fixed MODBUS TCP Slave RSSI value
      • Fixed MODBUS test button returning errors when several non-connected devices are configured
      • Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
      • Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
      • Fixed OpenVPN Static Key configuration saving by making Static key upload required
      • Fixed OpenVPN TLS client creation issue while LAN is down
      • Fixed Package Manager displaying non-existent packages
      • Fixed Package Manager errors showing up after successful installations
      • Fixed Periodic Reboot entry duplication after a power cycle
      • Fixed PPTP 'Client to client' option not being applied after save
      • Fixed receiving excessive device state emails after a reboot is initialized over RMS
      • Fixed WebUI unavailability after unsuccessful package install
    • System
      • Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
      • Fixed bash vulnerability CVE-2022-3715
      • Fixed CGI-IO file download vulnerability CVE-2022-38333
      • Fixed libxml2 vulnerability CVE-2022-40304
      • Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
      • Fixed LED animation during firmware upgrade
      • Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
      • Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
      • Improved file upload logic
      • Fixed GPL firmware compilation with selected Tinc package
      • Fixed OpenVPN Static Key migration via keep settings issue
      • Fixed NTP time zone name setting migration when the name contains whitespaces
      • Fixed language setting issue
      • Fixed integer validation on industrial services
      • Fixed LED indications when PDP type is IPv6
      • Fixed issues with PDP type and SMS limit period migration via keep settings

RUT2_R_00.07.03.4 | 2023.02.09

  • Fix
    • Network
      • Changed generic modem restart method
      • Fixed mobile page VoLTE switching issues
    • Services
      • Sanitized tcpdump storage location
    • System
      • Fixed legacy backup upload
      • Fixed upgrade from legacy FW issue with keep settings

RUT2_R_00.07.03.3 | 2023.01.25

  • Fix
    • Network
      • Fixed disabled WiFi interface after factory reset

RUT2_R_00.07.03.2 | 2023.01.13

  • New
    • System
      • Japanese language
  • Improvements
    • Network
      • Optimized mobile netifd script installation
  • Fix
    • Network
      • Shortened modem hang monitor timeout
      • Fixed VLAN option setting when changing VLAN ID

RUT2_R_00.07.03.1 | 2023.01.03

  • Improvements
    • System
      • Remove front-end certificate validation
    • Network
      • Optimized mobile netifd script installation
  • Fix
    • Network
      • Fixed modem communication validation
      • Fixed connection establishment in IPv6 only mode
    • Services
      • Fixed libxml2 vulnerability CVE-2022-40303
      • Fixed an IPsec Phase one & two setting migration issue
      • Fixed OpenVPN migration from legacy firmwares
      • Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
    • System
      • Fixed JSON key parsing; keys can now be any printable character sequence
      • Fixed memory leak in 'session' module
    • WebUI
      • Fixed file pretty name parsing

RUT2_R_00.07.03 | 2022.12.16

  • New
    • Network
      • Firewall DMZ page
    • Services
      • Java package
      • SFTP server support
      • OPC UA client
      • Hotspot registered users management page
    • System
      • Portuguese language
      • Spanish language
      • Turkish language
      • Email Relay package
    • WebUI
      • New Web menu design
  • Improvements
    • Network
      • Updated modem handling, attachment, tracking and connection establishment processes
      • Added the possibility to select multiple ports in all firewall port fields
      • Added 'Match' traffic by type option to firewall traffic rules
      • Added DNS servers and routing table fields to the Wireguard page
      • Improved generating network topology
      • Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
      • Update Firewall Traffic Rules page with DSCP and MARK options
      • Added keepalive, holdtime and connect timers to BGP configuration
      • Added 'Use gateway metric' to network protocols web interface
      • Added more DHCPv6 client events to system log
      • Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
      • Added option to select subnet parameters in mobile Passthrough/Bridge modes
      • Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
      • Added mobile connection state for IPv6
      • Added individual WiFi toggle support
      • Added error message when DFS channel is selected during scanning
    • Services
      • Added CSP headers to Hotspot Landing Page
      • Added hotspot user script validation
      • Improved logging of disconnecting client devices
      • Implemented Hotspot 'forget' method, which removes user from DB by MAC
      • Added execute custom script SMS Utilities rule
      • Added receiver and transceiver mode support to SMPP
      • Added timezone synchronization with GSM operator option to NTP Client
      • Updated Zerotier web interface
      • Added IPsec Flush connection option on tunnel initialization
      • Added MODBUS slave regfile validation
      • Added delay, number of timeouts, always reconnect options to MODBUS Master service
      • Added DMVPN Phase 2 and Phase 3 support
      • Added synchronization counting to NTP client
      • Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
      • Added 'Unregister' button to RMS page
      • Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
      • Updated Zerotier package to version 1.10.1
      • Added automatic package removal upon failed installation in Package Manager
      • Added option to describe custom routing table and MTU auto counting to Wireguard VPN
      • Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
      • Updated sqm-scripts to version 1.5.1
      • Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
      • Added monthly reboot option to periodic reboot function
      • Added support for multiple custom option selection to SSTP configuration
      • Added PKCS12 certificate chain support to OpenVPN
      • Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
      • Added QoS selection to MQTT Modbus Gateway
      • Improved RAM usage during upload and installation of packages via Package Manager
      • Updated curl to version 7.86.0
      • Added brute-force prevention measures to Post/Get
      • Added automatic private and public key generation to Wireguard VPN
      • Added multiple Remote source IP support to IPsec
      • Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
      • Added functionality to rotate log file when log is saved to Flash memory
      • Improved performance while fetching packages on repeat visits to the Package Manager page
    • System
      • Added a 'test mail' button to the Administration -> Recipients page
      • Added option to clear blocked IPs in the Access Control page after reboot
      • Updated Web Request-Response core logic
      • Added certificate validation to all services that support certificate upload
      • Updated URL protocol validations
      • Removed profile update requests during Save & apply
      • Optimized profile switching logic
    • WebUI
      • Added an indication to the Interfaces page that displays when data limit is enabled
      • Added bootloader version to the Device section in the System page
      • Added configuration page shortcuts to Overview page widgets
      • Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
      • Updated network interfaces protocols web interface
      • Updated 404 page to include navigation menu
  • Fix
    • Network
      • Fixed jumbo frames MTU issue
      • Added the 'Any' choice to source & destination IP address field in NAT rule edit
      • Fixed NHRP web interface issues
      • Fixed WAN interface configuration interfering with LAN
      • Fixed mdcollect memory leak issue
      • Fixed data limit not resetting properly
      • Fixed incorrect mobile data usage calculations for multiple day periods
      • Fixed an Auto APN 'Keep settings' issue
      • Fixed data counting after mobile data limit has been reached
      • Fixed mobile band not setting correctly on first try
      • Fixed incorrect data limit conditions causing unwanted SIM switches
      • Fixed Passthrough DHCP lease time setting
      • Fixed mobile bridge mode issue when no DNS servers are supplied
      • Added new Operator Lists instance name validations
      • Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
      • Fixed wireless interfaces connections not reestablishing after disabling & enabling again
      • Added wget tracking method to WAN Failover
      • Added interface checks to remove inaccurate Failover events from the Event Log
      • Fixed Wired WAN connectivity issue when Failover interfaces are disabled
      • Fixed Failover fallback issue
    • Services
      • Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
      • Fixed relay state switching
      • Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
      • Added I/O restart on configuration profile change
      • Fixed I/O voltage range display for power socket pins
      • Fixed SMNP OID for I/O state
      • Fixed I/O Juggler SMS text message Save & Apply issue
      • Fixed Hotspot connected user list maximum upload/download value limits
      • Fixed incorrect connected Hotspot user information in RMS JSON
      • Removed unnecessary field from the Port Mirroring page
      • Fixed Hotspot issues related to specific connected phones
      • Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
      • Fixed WiFi Scanner hostname validation issues
      • Fixed UCI SMS Rule return message to display new changes
      • Fixed DNP3 issues when asking for modem temperature
      • Fixed base64 encoding of SMS messages when forwarding to HTTP
      • Fixed SMS sending issues when using multiple APN
      • Added Gateway modem option to IP Block and WoL in SMS Rule edit
      • Fixed unblocking IP addresses with an SMS message
      • Fixed Mobile Utilities page not load properly on some occasions
      • Fixed dbus vulnerability CVE-2020-35512
      • Fixed dnsmasq vulnerability CVE-2022-0934
      • Fixed ext4 vulnerability CVE-2021-3428
      • Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
      • Fixed libxm12 vulnerability CVE-2022-29824
      • Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
      • Fixed MQTT DoS vulnerability CVE-2021-41039
      • Fixed privoxy vulnerability CVE-2021-44542
      • Fixed python3 vulnerability CVE-2022-42919
      • Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
      • Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
      • Fixed switching between RMS connection types while the device is unregistered
      • Fixed reload issues in website blocking feature
      • Fixed IPsec PSK secret required field validation
      • Fixed bandwidth limiting after QoS is enabled for the first time
      • Fixed Dropbear issues when logging in over IPv6
      • Fixed Modbus status in Status -> Services page
      • Fixed Azure IoT Hub application issues when sending large volumes of data
      • Fixed Azure IoT Hub MQTT password validation
      • Fixed DMVPN configuration migration issue
      • Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
      • Fixed DMVPN IPsec connection issue
      • Fixed DMVPN mobile interface 'Keep settings' migration issue
      • Fixed Dynamic DNS long hostname text display issue
      • Fixed Events Reporting memory leak issue
      • Fixed Events Reporting not triggering after flipping an I/O slider
      • Fixed FOTA cron job not starting after factory reset
      • Fixed IPsec local firewall option parsing
      • Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
      • Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
      • Fixed NTP pool hostname validation
      • Fixed OpenVPN certificate remove with Static key and TLS authentication methods
      • Fixed OpenVPN configuration saving issue when using HMAC key authentication
      • Fixed OpenVPN custom dev name transformation to correct format
      • Fixed OpenVPN device name setting logic when uploading config from file
      • Fixed OpenVPN instance status display
      • Fixed OpenVPN TAP (bridged) configuration detection
      • Fixed Qos configuration saving issue occurring after instance deletion
      • Fixed RMS JSON incorrect WAN state and IP information
      • Fixed RMS step access issue in the Setup Wizard page
      • Fixed SNMP issues after reboot while using a Hotspot
      • Fixed SNMP generating MIB files for devices in accordance with to their hardware
      • Fixed SNMP traps not working after SNMP is installed from server
      • Fixed SSTP client route creation issue
      • Fixed UPNP secure mode not turning off issue
      • Fixed Wireguard route to endpoint issue
      • Fixed manual package installation for queued packages
      • Fixed NAT Rules dependency from IPsec web instance
      • Returned usleep utility
      • Updated Australian and South African NordVPN server IP addresses
    • System
      • Fixed certificate signing issues
      • Fixed Telnet, CLI access blocking after max invalid tries
      • Fixed FW upgrade with 'Keep settings' while low free space is available
      • Fixed backup file duplication issue
      • Fixed network device handling in system
    • WebUI
      • Fixed Hotspot interface display
      • Fixed side widget accessibility during first login
      • Fixed file upload issues
      • Fixed drag and drop issue in the Traffic Rules page
      • Fixed protocol display in the overview of the Interfaces page
      • Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
      • Fixed login errors after browser tab restoration
      • Fixed redirect to newly set IP address after Interface configuration
      • Fixed firmware upgrade verify spinner not closing
      • Fixed an issue with file upload via drag and drop

RUT2_R_00.07.02.7 | 2022.09.12

  • Improvements:
    • Improved manual-auto connection mode
  • Fixes
    • Fixed AT command for SMS storage usage
    • Fixed CVE-2022-1012 memory leak vulnerability
    • Fixed CVE-2022-37434 kernel vulnerability
    • Fixed interface option reset after VLAN ID change
    • Removed memory leak on port events
    • Fixed WiFi Scanner out of range crash when iterating collected data

RUT2_R_00.07.02.6 | 2022.08.24

  • Improvements:
    • Added 'home.vodafone.de' APN
    • Improved stability of device information storage
  • Fixes:
    • Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
    • Fixed Serial-symlink dmesg messages
    • Fixed OpenVPN tls-auth and tls-crypt option names

RUT2_R_00.07.02.5 | 2022.08.12

  • Improvements:
    • Updated curl to version 7.83.1
    • Updated firmware validation error messages
    • Added multiple source IP address support to the Port Forwards page
    • Increased custom APN Username & Password field maximum length to 64 symbols
    • Added auto switch to modem's SMS storage when SIM card storage doesn't exist
    • Improved mobile connection status handling
    • Added CSP headers Hotspot WebUI landing page
  • Fixes:
    • Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
    • Fixed CVE-2022-30065 busybox vulnerability
    • Fixed file upload path traversal
    • Removed Data to Server limit to proccess less than 10 instances
    • Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
    • Fixed OpenVPN dev setting logic
    • Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
    • Fixed MAC and leasetime setting for Bridge & Passthrough modes
    • Fixed modal tabs navigation when editing wireless interface with non-english languages

RUT2_R_00.07.02.4 | 2022.07.20

  • Improvements:
    • Added default password change warning message before firmware downgrade
    • Extended time period for device to make connection to operator
    • Reduced the number of modem reboots when changing mobile settings
    • Reduced excessive log output when no SIM card is inserted
    • Added modem restart prevention on modem init
    • Added disable RPLMN option in the SIM section of the SIM card config
  • Fixes:
    • Fixed CVE-2022-2068 vulnerability
    • Disabled autoconnect on stop-network call
    • Fixed Hotspot login via landing page issue

RUT2_R_00.07.02.2 | 2022.06.27

  • Improvements:
    • Added ping to DNS IPv6 support
    • Added modem reset to default state after device FW upgrade
    • Modem init now checks NVRAM sensitive commands before setting
    • GSM output was made consistent
    • Updated FSTools package to version 2022-05-03
    • Added security headers to web requests
  • Fixes:
    • Fixed CVE-2019-12900 libbz2 vulnerability
    • Fixed behavior of some gsmctl commands
    • Fixed CVE-2022-23303 hostapd vulnerability
    • Fixed CVE-2022-29581 Linux kernel vulnerability
    • Fixed CVE-2022-29458 ncurses vulnerability
    • Fixed CVE-2022-1292 c_rehash script command injection vulnerability
    • Fixed band locking issue
    • Fixed race condition for wireless configuration initialization
    • Fixed operator control issue

RUT2_R_00.07.02.1 | 2022.06.06

  • Improvements:
    • Improved GSM related messages in Troubleshoot logs
  • Fixes:
    • Fixed IGMP Proxy menu item not appearing after package installation
    • Fixed default mobile network configuration generation
    • Fixed MODBUS write requests and Mobile Utils option setting

RUT2_R_00.07.02 | 2022.05.23

  • New features
    • Overview side widget
    • IGMP Proxy
    • Privileged Access Management (PAM)
    • AWS Greengrass support
    • HTTPS certificate and key upload feature
    • SSH public keys edit box
    • License page
    • DNP3 data for Data to Server
  • Improvements
    • Updated busybox to version: 1.34.1
    • Updated curl to version 7.79.1
    • Added iptables filter package for string filtering
    • Added CHAP authentication for L2TP VPN
    • Added IPv6 support for L2TPv3 VPN
    • Added EAP-MSCHAPV2 authentication method for IPsec VPN
    • Added IPv6 support to Auto Reboot
    • Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
    • Updated SNMP version 5.9.1
    • Added OpenSSL authentication options to SNMPv3
    • Added support for OSPF redistribution options and OSPF neighbors
    • Added password field to BGP Peers page
    • Extended BGP "AS" field validation to accept integers up to 4294967295
    • Added "DHE+RSA" to OpenVPN cipher selections
    • Increased OpenVPN max password length from 128 bytes to 512 bytes
    • Made HMAC key direction initial value dependent on the role of the instance (client or server)
    • Made HMAC key and HMAC authentication key upload fields required
    • Added DES to IPsec encryption algorithms selections
    • Added special character support for CHAP secrets
    • Added validation requirements for PPTP user list username field
    • Added option to manually enter Public key in Wireguard configuration
    • Made generating Wireguard keys possible only while in auto mode
    • Added Events Log database to troubleshoot archive
    • Added RFC1918 filter field
    • Added the possibility to unblock multiple blocked devices at once
    • Added 'Port' column to blocked login attempts table
    • Added Speedtest server refresh
    • Updated Speedtest server list
    • Added asterisk option to Site Blocking
    • Added MD5 and SHA256 checksums to package validation page
    • Changed certificate requirements to only require client key file if client certificate is used
    • Added pagination and data retention between table pages
    • Added pagination functionality to tables when there are more than 10 records
    • Improved table sorting by saving user provided sort settings in the browser
    • Improved drag and drop functionality
    • Added the possibility to drag and drop files onto upload components
    • Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
    • Added 'Strict-Transport-Security' response header for HTTPS
    • Added 'breadcrumbs' to modal windows
    • Improved initial WebUI loading after login
    • Added mobile bytes sent and bytes received SNMP OIDs
    • Added mobile LED turn off feature ('System -> Administration' page)
    • Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
    • Updated mobile usage data point calculation logic
    • Added the possibility to manually enter operator number
    • Improved obtain mobile cell ID process
    • Added modem restart if SIM card is removed during APN database fetching process
    • Added unauthorized call logging
    • Added space character support in SMS commands
    • Disabled SMS modem storage configuration form when SIM is not inserted
    • Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
    • Added external modem SMS limit Overview card and widget
    • Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
    • Added duplicate value check for list configuration options
    • Changed mobile card instance design
    • Fixed 'Mobile Data usage reset' SMS rule
    • Fixed the default state parameter of SMS list POST/GET command
    • Added Hotspot configuration profiles
    • Added local Hotspot user password hashing
    • Added Hotspot password encoding option
    • Improved Hotspot related firewall rule setting
    • Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
    • Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
    • Added ubus support to Hotspot
    • Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
    • Added I/O SNMP trap
    • Added ISO 8601 time format to I/O Juggler's '%ts' parameter
    • Added device name parameter '%pc' to I/O Juggler
    • Added PPPoE VLAN priority support
    • Made VRRP ping section dependent on main instance
    • Added 'WAN to LAN' switch
  • Fixes
    • Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
    • Fixed CVE-2022-28391 busybox vulnerability
    • Fixed CVE-2018-16789 shellinabox vulnerability
    • Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
    • Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
    • Fixed zlib backport security issue
    • Fixed Wireguard firewall zone assignment
    • Fixed queued packages disappearing from list after FW upgrade with keep settings
    • Fixed error message display for multiple input validation rules
    • Fixed incorrect DHCP validation range for start and limit fields
    • Removed 'Bring up on boot' option from network interface configuration pages
    • Fixed coma-separated DHCP options disappearing after save
    • Fixed exclude and listen interfaces
    • Fixed 'Use broadcast flag' option saving
    • Fixed firewall zone assignment when creating new interfaces
    • Fixed OpenVPN 'Netmask' and 'IP address' field validations
    • Fixed OpenVPN TAP configuration saving issue
    • Fixed OpenVPN switching to TUN mode when uploading a configuration from file
    • Fixed dynamic BGP route state display
    • Fixed BGP peer enable in edit page
    • Fixed issue when no L2TP client instance could be bound to IPsec
    • Fixed firewall rule and zone behavior related to config section creation
    • Added default value for L2TPv3 netmask, which is now written to config after save
    • Fixed passthrough option saving to IPsec file
    • Fixed DMVPN issue where instance configuration could not be saved
    • Fixed Wireguard peer could not be saved issue
    • Fixed NTP client time synchronization after factory reset
    • Fixed device time display with selected time zone
    • Fixed MODBUS TCP indexation missing bracket issue
    • Fixed initial MODBUS TCP request count validation
    • Fixed PIN 3/4 direction switching over MODBUS TCP
    • Fixed MODBUS data to MQTT socket closing issue when connection fails
    • Fixed MODBUS alarm configuration deletion
    • Fixed DNP3 master not working after FW upgrade with 'keep settings'
    • Fixed DNP outstation not returning error messages
    • Added missing SNMP objects: mobile IP, data sent/received today
    • Fixed MQTT Publisher 'Remote address' field validation
    • Fixed long interface name support for Azure IoT Hub
    • Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
    • Fixed missing sent/received data issue
    • Fixed URL input field length validation
    • Fixed admin login issue after upload of backup from a device with older firmware versions
    • Fixed MAC address formatting in Events reporting messages
    • Fixed Events reporting DHCP lease message spam, when no new lease is added
    • Fixed logging crashing after downloading Troubleshoot file
    • Made Wake on LAN visible only on devices with Ethernet ports
    • Fixed Traffic log file transfer to FTP server
    • Fixed Web Filter service reloading after a host list file is uploaded
    • Fixed access denied messages when sending JSON-RPC requests from root user
    • Fixed error message display about duplicated intervals in Profile scheduler
    • Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
    • Corrected OSPF Routing card values, value positions and names
    • Fixed global secret instances not being removed when there are no IPsec instances
    • Fixed uploaded file remove icon not staying in position on hover
    • Fixed Overview card collapse issue that made it unresponsive after too many clicks
    • Removed WAN6 interface from the Overview page
    • Fixed mobile IPv6 display in Events Reporting status messages
    • Fixed Bridge mode when DNS2 is not available
    • Fixed PAP/CHAP username and password fields not saving in interface edit window
    • Fixed sending email without secure connection for providers that support such an option
    • Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
    • Fixed Call Utilities Events Log message for reboot rule
    • Fixed SMS command validation for no-authorization option
    • Fixed MODBUS SMS alarms 'Enable' option saving
    • Fixed running RMS with no SIM card inserted issue
    • Fixed firmware available on server version checking issue
    • Fixed CVE-2020-15078 openvpn vulnerability
    • Fixed storage calculation for packages
    • SMS Utilities: enhanced service security
    • Fixed firmware deletion after leaving the page
    • Fixed setup wizard redirect after LAN IP change
    • Fixed various validation bugs, typos, option hints & alignments
    • Fixed multiple IPv6 configuration field validations
    • Fixed PDP logging for Verizon operator
    • Added multiwan support for Wireguard default route
    • Fixed wireless signal strength display when no clients are connected
    • Fixed loss of connectivity for clients when router is in STA+AP mode
    • Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
    • Fixed Wifi Scanner data not being stored in certain scenarios
    • Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
    • Fixed Hotspot user group limit not resetting on specified time
    • Removed an RMS error message when no Hotspot users were created
    • Fixed Hotspot landing page image upload issue
    • Fixed relay output value display in I/O Juggler condition page
    • Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
    • Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
    • Fixed I/O Juggler's incorrect I/O status messages
    • Fixed APN migration if APN was selected from APN list on legacy firmware
    • Fixed RIP configuration migration from legacy firmware versions
    • Fixed Wireguard interface status setting migration from legacy firmware versions
    • Fixed default config options for SSH and Web access SMS Utilities rules

RUT2_R_00.07.01.4 | 2022.02.25

  • Improvements
    • Increased Port Forwards rule max name length
    • Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
  • Fixes
    • Added missing bracket to the end of MODBUS messages
    • Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
    • Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
    • Fixed firewall extra option validation
    • Fixed Hotspot enable button validation
    • Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
    • Changed the logic of uploading files to the modem
    • Fixed second mobile interface creation issue
    • Fixed usage of custom headers in I/O Juggler HTTP action
    • Fixed 'verify' option parsing for I/O Juggler
    • Fixed OpenVPN server configuration with password authentication
    • Fixed NTP interval length validation
    • Fixed network interface enable after Drag & Drop
    • Updated NTP client interval to 24h
    • Fixed connection to whitelist carriers
    • Fixed Passthrough mode when DHCP is disabled
    • Fixed 'Deny data roaming' feature
    • Fixed mobile blocking dependency on region
    • Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

RUT2_R_00.07.01.2 | 2022.01.04

  • New features
    • DFOTA modem upgrade system for Quectel modems
  • Improvements
    • Removed L2TP section title prefixes
  • Fixes
    • Fixed IPSec crashing issue using mobile
    • Fixed FW flashing when chip is in unknown state
    • Fixed CPU usage percentage display in the Overview page
    • Fixed FOTA timeout issue when server does not respond
    • Fixed installation of backup packages
    • Fixed mobile data limit display after profile change
    • Fixed Bridge mode without multi-APN
    • Fixed multi mobile interface checking
    • Fixed error handling when the modem is not responding
    • Prolonged autoconnect setting timeout

RUT2_R_00.07.01 | 2021.11.18

Note: Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.


  • New features
    • RUTOS WebUI