Template:Networking rutos manual mobile utilities

From Teltonika Networks Wiki

Template:Networking rutos manual fw disclosure

Summary

{{{name}}} routers have an extensive amount of various SMS control utilities. SMS Utilities can be used to set/get configurations, monitor and issue commands to the router.

SMS Utilities

Default Rules

The SMS Utilities section contains a list of rules that perform certain actions when they are activated by SMS messages.

The entire list contains more than 20 rules but you are also be provided with the possibility to configure custom ones or edit the existing rules.

All default configuration options are listed below:

  • Reboot
  • Send_status
  • I/O set
  • I/O status
  • Mobile (on)
  • Mobile (off)
  • SSH_access (on)
  • SSH_access (off)
  • Web_access (on)
  • Web_access (off)
  • Firstboot
  • Switch SIM
  • Fw_upgrade
  • RMS status
  • Rms connect
  • Rms action (on)
  • Rms action (off)
  • Monitoring status
  • More

    • Execution

    To execute a rule, just send an SMS message to the router‘s SIM card number with the rule's SMS Text, e.g., if you send a message with the text “reboot”, the router will reboot if the selected Authorization method is “No authorization”. However, if there is an Authorization method present you will need to include the “Authorization key” in the text message. This “Authorization key” depends on the chosen Authorization method, i.e., if the method is “By serial”, the “Authorization key” is the router’s serial number, if the method is “By router admin password”, the “Authorization key” is the router’s admin password.

    The "Authorization key” must precede the activation text and they must be separated by a space symbol. For example, if the chosen Authorization method is “By router admin password” and the password is “admin01”, the entire message should look like this: “admin01 reboot”. The same applies to “By serial” authorization. By default authorization for SMS utilities are set "By router admin password".

    Rule Overview and editing

    Every default SMS rule can be edited to your liking. If none of the rules suit your purposes, just click the Edit button next to any SMS Utilities rules. This guide will contain information on editing every single SMS Utilities rule.

    SMS rule General settings

    SMS rule Authorization settings

    File:Networking trb manual mobile utilities reboot Authorization settings v1.png

    Above is an example of what SMS Configuration General and Authorization settings windows looks like, specifically, SMS Configuration for the Reboot rule. Below is a table with detailed explanations on how to configure the rule and what each of the fields mean. To avoid redundancy, screenshots for the other rules will not be provided, since the structures, syntax and the overall look of the configuration windows for each rule are very similar. Instead, only tables containing information on how to edit each rule will be provided.

    Reboot

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable SMS reboot function Allows router to restart via SMS
    Action The action to be performed when this rule is met Reboots the router
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Get status via SMS after reboot Check this to receive connection status via SMS after the reboot If enabled, the router will send a status message once it has rebooted and is operational again. This is both a separate SMS Rule and an option under the SMS Reboot rule
    Modem Select which modem you want to use Which modem is configured
    Gateway modem Select which modem you want to use Which modem is configured
    Message text Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available You can select which status elements to display
    Authorization method What kind of authorization to use Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Send status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable SMS status function Allows you to get the router‘s status via SMS. This is both a separate SMS Rule and an option under the SMS Reboot rule
    Action The action to be performed when this rule is met Returns an SMS message containing information about the status of the router. The type of information contained within the message can be specified in the Message text field
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Modem Select which modem you want to use Which modem is configured
    Gateway modem Select which modem you want to use Which modem is configured
    Message text Which status information should be included in SMS. Default message includes: Device name, Wan IP, Data Connection state, Connection type, Signal strength, New FW available You can select which status elements to display
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Switch mobile data ON/OFF

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the Switch mobile data function Allows mobile control via SMS
    Action The action to be performed when this rule is met Turn mobile data ON or OFF
    State The state to which mobile data will be set when this rule is met. If you set it as ON it will turn on mobile data if OFF it will turn it off.
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Modem Select which modem you want to use Which modem is configured
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    SSH access control

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the SSH access control function Allows SSH access control via SMS
    Action The action to be performed when this rule is met Turns SSH access ON or OFF
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Enable SSH access Enables or Disables SSH access from LAN If this is ON, SMS will enable SSH access from LAN, if not, SMS will disable SSH access from LAN
    Enable remote SSH access Enables or Disables SSH access from WAN If this is ON, SMS will enable SSH access from WAN, if not, SMS will disable SSH access from WAN
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Web access Control

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the Web access control function Allows Web access control via SMS
    Action The action to be performed when this rule is met Turns access to WebUI ON or OFF
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Enable HTTP access Enables or Disables HTTP access from LAN If this is ON, SMS will enable HTTP access from LAN, if not, SMS will disable HTTP access from LAN
    Enable HTTPS access Enables or Disables HTTPS access from LAN If this is ON, SMS will enable HTTPS access from LAN, if not, SMS will disable HTTPS access from LAN
    Enable remote HTTP access Enables or Disables HTTP access from WAN If this is ON, SMS will enable HTTP access from WAN, if not, SMS will disable HTTP access from WAN
    Enable remote HTTPS access Enables or Disables HTTPs access from WAN If this is ON, SMS will enable HTTPS access from WAN, if not, SMS will disable HTTPS access from WAN
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Restore to default

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the Restore to default function Allows you to restore the router to it's default settings via SMS
    Action The action to be performed when this rule is met Executes a router reset, which means the router will reboot after this rule is executed and all custom configurations will be deleted and restored to default
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    FW upgrade from server

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the FW upgrade from server function Allows you to upgrade the router‘s FW via SMS
    Action The action to be performed when this rule is met Upgrades your router's current Firmware to the one uploaded and assigned to your router in FOTA. The router will reboot and be unreachable for a couple of minutes after this rule is executed
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Force SIM switch

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the Force SIM switch function Allows SIM switch via SMS
    Action The action to be performed when this rule is met Forces the router to switch to the other SIM card (the one that is not in use at the moment of receiving the message)
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Modem Select which modem you want to use Which modem is configured
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: '''By router admin password'''
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: '''From all numbers'''

    Monitoring control

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the Monitoring control function Allows you to control RMS monitoring status via SMS
    Action The action to be performed when this rule is met Turns RMS monitoring ON or OFF
    State The state to which RMS monitoring will be set when this rule is met If you set is as ON it will turn on RMS monitoring if OFF it will turn it off
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Wake on LAN

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the Wake on LAN function Provides the possibility to wake computers from sleep mode
    Action The action to be performed when this rule is met Wakes the specified computer from sleep mode
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    MAC address Computer's MAC Address A MAC address of a device you want to wake up
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Mobile data limit status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the mobile data limit status function Allows you to get mobile data limit status via SMS
    Action The action to be performed when this rule is met Sends you mobile data limit status
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter
    Modem Select which modem you want to use Which modem is configured
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Change I/O state

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the possibility to change output state Allows you to change output state via SMS
    Action The action to be performed when this rule is met Changes output state
    I/O Type of output which will be activated Select which output you want to use
    State The state to which output will be set when this rule is met If you set it as High it will turn on output if Low it will turn it off
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: ioset
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    I/O status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable SMS I/O status function Allows you to get the router‘s I/O status via SMS
    Action The action to be performed when this rule is met Returns an SMS message containing information about the Input/Output status of the router
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: iostatus
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Monitoring status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the Monitoring status function Allows you to get monitoring status via SMS
    Action The action to be performed when this rule is met Returns a text message containing information about remote monitoring status
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Default text: monitoring_status
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    RMS status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the RMS status function Allows you to get RMS status via SMS
    Action The action to be performed when this rule is met/td> Returns a text message containing information about remote monitoring status
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Default text: RMS_status
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    RMS action

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the RMS action function Allows you to manage RMS functionality via SMS
    Action The action to be performed when this rule is met/td>
    State The state to which RMS will be set when this rule is met. If you set it as ON it will turn on RMS functionality if OFF it will turn it off.
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Default text: rms_on
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    RMS status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the RMS action function Allows you to manage RMS functionality via SMS
    Action The action to be performed when this rule is met/td>
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Default text: rms_on
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Get OpenVPN status

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the OpenVPN status function Allows to get the router‘s OpenVPN status via SMS
    Action The action to be performed when this rule is met/td> Returns an SMS message containing information about an OpenVPN instance's status
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter; Default text: vpnstatus
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Manage OpenVPN

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the Manage OpenVPN function Allows OpenVPN control via SMS
    Action The action to be performed when this rule is met/td> Turns an OpenVPN instance ON or OFF
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter

    Default: vpnon to turn OpenVPN ON; vpnoff to turn OpenVPN OFF

    After the SMS text you have to write OpenVPN instance‘s name, e.g., "vpnon client_Client1"
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Get list of profiles

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the Get list of profiles function Allows you to get the list of profiles via SMS
    Action The action to be performed when this rule is met/td> Sends you the list of existing profiles
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Default text: profdisp
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Change profile

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the Change profile function Allows changing profiles via SMS
    Action The action to be performed when this rule is met. Changes the current profile to the one specified in the message
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter. Default text pr. After the SMS text you have to write the Profile's name, e.g., "pr John"
    Authorization method What kind of authorization to use for SIM management Possible values:
  • No authorization
  • By serial
  • By router admin password; Default: By router admin password
    		•
    Allowed users White list of allowed users Possible values:
  • From all numbers
  • From group
  • From single number; Default: From all numbers
    		•

    More

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the MORE rule Provides the possibility to see the next part of the message
    Action The action to be performed when this rule is met/td> Returns a text message containing the next part of the message
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter Default text: more
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    Change mobile data settings (cellular) rule

    The Change mobile data settings rule is exceptional to most of the other rules as it does not perform a single action like turning specific services On/Off or getting status updates. It designed to change mobile data settings and it's SMS text can't be described by a single string because the message depends on what configurations you want to change. For example, you can send a message that will change your APN only, you can send a message that will change APN and mobile service mode, or even a message that will change every single mobile setting.

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This check box will enable or disable the Change mobile data settings function Allows you to change mobile settings via SMS
    Action The action to be performed when this rule is met. Changes the specified mobile settings
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matter. Default: cellular. Detailed explanations on how to use this function are presented in the table below
    Authorization method What kind of authorization to use for SIM management Possible values:
  • No authorization
  • By serial
  • By router admin password; Default: By router admin password
    		•
    Allowed users White list of allowed users Possible values:
  • From all numbers
  • From group
  • From single number; Default: From all numbers
    		•

    The default SMS text for the Change mobile data settings rule is cellular but it is only an indication text and does not include any specific parameters to be changed. The list of parameters that can be changed and explanations on how to incorporate them into the "cellular" message is presented in the table below.

    PARAMETER VALUE DESCRIPTION DEFAULT MESSAGE EXAMPLE
    apn= e.g., internet Sets APN cellular apn=internet
    dialnumber= e.g., *99***1# Sets Dialing number cellular dialnumber=*99***1#
    auth_mode=
  • none
  • pap
  • chap
    		•  Sets Authentication method cellular auth_method=pap
    service=
  • 3gonly
  • 4gonly
  • auto
    		•  Sets the mobile Service mode cellular service=auto
    username= e.g., user Sets the user name for PAP or CHAP authentication cellular username=user
    password= e.g., pass Sets the password for PAP or CHAP authentication cellular password=pass
    roaming= 0 for OFF; 1 for ON Turn Mobile data roaming ON or OFF cellular roaming=0

    Each of the above examples contain a single parameter but you can send out multiple parameters in one message. For example, "cellular apn=internet service=3gonly". This message would set your APN to "internet" and your Service mode to 3G Only. You can also send a message that would include all of the parameters above: "cellular apn=internet dialnumber=*99***1# auth_mode=pap service=3gonly username=user password=pass"


    UCI API rule

    The UCI rule lets you set or get any parameter from the router's configuration files.

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    Enable This will enable or disable the UCI API function Allows you to set or get any configurations from the router
    Action The action to be performed when this rule is met. Sets or sends you any specified configurations of the router
    SMS text SMS text that will trigger the rule SMS text can contain letters, numbers, spaces and special symbols. Capital letters also matterDetailed explanations on how to use this function are presented in the table below
    Modem Select which modem you want to use Which modem is configured
    Authorization method What kind of authorization to use for SIM management Possible values: No authorization | By serial | By router admin password; Default: By router admin password
    Allowed users White list of allowed users Possible values: From all numbers | From group | From single number; Default: From all numbers

    The following are syntax examples for the UCI API rule:

    FIELD NAME DESCRIPTION EXPLANATION, NOTES
    uci get config.section.option" Returns config option value uci get network.wan.ipaddr - returns the router's WAN IP address
    uci set config.section.option="value" Sets config option "uci set network.mobile.apn=example" - Changes mobile APN to example
    uci show config Returns the contents of a config file uci show openvpn - returns the contents of the openvpn config file
    uci show config.section Returns the exact part of a config file (either section or the exact option value) uci show network.ppp - returns the contents of the ppp interface section from the network config file

    As you can see, the UCI rule requires that you know the names of the configuration files and the names of the

    sections and parameters that they hold. You can find the config file list and some examples of UCI usage in general in our UCI command usage article.

    Custom Rules

    If default rules do not suit your purposes, you can also configure custom SMS rules. To do so, go to the bottom of the SMS Utilities page, where you will find the Add Rule tab. Write SMS text, select an Action and press the Add button located next to it.

    File:Networking trb manual mobile utilities add rule v1.png

    Configuring a new rule is very similar to editing default rules: you are provided with a list of Actions, other fields are generated in accordance with which Action you choose.

    SMS Gateway

    This section is a summary of the SMS Gateway function in {{{name}}} routers.

    Post/Get

    Post/Get allows you to perform action requests by writing them in the URL after your device’s IP address. File:Networking rutx manual mobile utilities post get v2.png

    Field Value Description
    Enable off | on; default: off Enable SMS management functionality through POST/GET
    User name Default: user1 User name used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
    Password Default: user_pass Password used for authorization (5 characters minimum). Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )

    Use a web browser or any other compatible software to send HTTP post/get strings to the router. The router must be connected to a GSM network when using the Send SMS feature. Below you will find a table with possible actions and examples on how to use them:

    Action Post/get URL examples
    View mobile messages list http://192.168.1.1/cgi-bin/sms_list?username=user1&password=user_pass
    Read mobile message http://192.168.1.1/cgi-bin/sms_read?username=user1&password=user_pass&number=1
    Send mobile message http://192.168.1.1/cgi-bin/sms_send?username=user1&password=user_pass&number=0037060000001&text=testmessage
    View mobile messages total http://192.168.1.1/cgi-bin/sms_total?username=user1&password=user_pass
    Delete mobile message http://192.168.1.1/cgi-bin/sms_delete?username=user1&password=user_pass&number=1
    • 192.168.1.1 - router's IP address. (Replace it with your [[{{{name}}}_LAN#General_Setup|LAN IP]] or [[{{{name}}}_WAN#Operation_Modes|WAN IP]] (when connecting remotely))
    • SMS related post/get commands. Possible values are:
      • sms_list - view all SMS messages in storage
      • sms_read - read a single SMS message by specified SMS index (number)
      • sms_send - send an SMS message to specified recipient
      • sms_total - display SMS storage statistics
      • sms_delete - delete a single SMS message by specified SMS index (number)
    • & - separation symbol. After specifying the SMS command, other parameters must be separated by an ampersand (&) symbol
    • username - SMS post/get configuration user name
    • password - SMS post/get configuration password
    • number - SMS message index or (depending on context) recipient's phone number. SMS message indexes can be viewed with the sms_list command.
      Correct phone number format is:
      • 00 - number must be preceded by two zeros
      • <country_code> - the next following element is the number holder's country code
      • <receivers_number> - phone number of the recipient
             For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's
       phone number, all preceded by 00)
    • text - SMS message text

    Auto Reply

    Auto reply allows you to configure automatic replying to SMS messages that the router receives. File:Networking rutx manual mobile utilities auto reply v2.png

    Field Value Description
    Enable off | on; default: off Toggles Auto Reply ON or OFF
    Reply SMS-Utilities rules off | on; default: off It will reply to sms rules, from SMS-Utilities
    Don't save received messages off | on; default: off If enabled, the router will delete received SMS messages
    Mode Default: Everyone Specifies whether to auto reply to every phone number or just just specified phone numbers. Available options:
  • Everyone
  • Listed numbers
  • From user group
    		•
    Message text Default: " " The message that will be sent in reply

    SMS Forwarding

    This section is a summary of the SMS Forwarding function in {{{name}}} routers.

    SMS Forwarding To HTTP

    The SMS Forwarding To HTTP functionality forwards SMS messages to HTTP, using either POST or GET methods.

    Field Value Description
    Enable off | on; default: off Enable/disable SMS forwarding to HTTP
    Forward SMS-Utilities rules off | on; default: off Enable/disable sms-utilities rules forwarding
    Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
    Include sender's number off | on; default: off Enable/disable adding original message sender phone number at the end of message text
    HTTPS certificate verification Default: Ignore Select whether to ignore or verify server certificate. Available options:
  • Ignore
  • Verify
    		•
    Method Default: Get Choose witch HTTP request method will be used. Available options:
  • Get
  • Post
    		•
    URL Default: " " URL to which message is going to be forwarded
    Number value name Default: " " Sender phone number code name for query string name/value pair
    Message value name Default: " " Message code name for query string name/value pair
    Extra data pair 1 Default: " " Extra html query name/value pair. Enter name to the left field and value to right
    Extra data pair 2 Default: " " Extra html query name/value pair. Enter name to the left field and value to right
    Mode Default: All messages Choose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group

    • SMS Forwarding To SMS

    The SMS Forwarding To SMS function forwards SMS messages to one or several recipients.

    File:Networking rutx manual mobile utilities sms to sms v2.png

    Field Value Description
    Enable off | on; default: off Enables/disables SMS forwarding to SMS
    Forward SMS-Utilities rules off | on; default: off Enable/disable sms-utilities rules forwarding
    Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
    Add sender's number off | on; default: off Enable/disable adding original message sender phone number at the end of message text. Only added if total message length is up to 480 characters
    Mode Default: All messages Choose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group
    • Recipients phone numbers Default: " " Number(s) to which received messages will be forwarded to

    SMS Forwarding To Email

    The SMS Forwarding To Email function forwards SMS messages to email. File:Networking rutx manual mobile utilities sms to email v2.png

    Field Value Description
    Enable off | on; default: off Enables/disables SMS forwarding to Email
    Forward SMS-Utilities rules off | on; default: off Enables/disables sms-utilities rules forwarding
    Don't save received message off | on; default: off Select whether you want to save forwarded messages or not
    Add sender's number off | on; default: off Enable/disable adding sender phone number at the end of email text body
    Subject Default: " " Subject of an email. Allowed characters (a-zA-Z0-9!@#$%&*+-/=?^_`{|}~. )
    Email group Default: " " Sender's email configuration
    Recipient's email address Default: " " For whom you want to send an email to. Allowed characters (a-zA-Z0-9._%+-)
    Mode Default: All messages Choose which messages are going to be forwarded. Available options:
  • All messages
  • From listed numbers
  • From user group

    • Email To SMS Forwarding

    Email to SMS Forwarding is a function that connects to your email account and checks its inbox at the specified frequency. If it finds any new received emails with a specific subject (phone number in email subject), it sends the body of the email as an SMS message(s) to the recipient specified in the email subject field.

    Important note: all POP3 server email messages from inbox will be deleted when using this service. File:Networking rutos manual mobile utilties email to sms v1.png

    Field name Value Description
    Enable off | on; Default: off Turns Email to SMS Forwarding ON or OFF
    POP3 server host | ip; Default: none Email service provider's POP3 server address (can be looked up online)
    Server port integer [0..65535]; Default: none Email service provider's POP3 server port (can be looked up online)
    User name string; Default: none Email account user name. This is information is used by router in order to atuhenticate itself when connecting to the email client
    Password string; Default: none Email account password. This is information is used by router in order to atuhenticate itself when connecting to the email client
    Secure connection (SSL) yes | no; Default: no SSL is a protocol for transmitting private documents via the Internet. SSL uses a cryptographic system that uses two keys to encrypt data − a public key known to everyone and a private or secret key known only to the recipient of the message
    SMS limit integer; Default: 5 Limit of SMS count that can be contained in the email body of text, SMS length is limited to 160 seven-bit characters. Emails that contain more symbols than it is specified in this field will not be sent as SMS messages
    Check email every time; Default: 1 minute Email inbox check interval
    Interval Minutes | Hours| Days; Default: Minutes Email inbox check interval

    Additional note: you may have noticed that there is no option where you can specify the recipient's phone number. As mentioned earlier, Email to SMS doesn't forward all emails, only the ones that are meant to be forwarded. Only emails with the recipient's phone number in the subject will be forwarded to SMS

    Correct phone number format is:

    • 00 - number must be preceded by two zeros
    • <country_code> - the next following element is the number holder's country code
    • <receivers_number> - phone number of the recipient

    For example, a valid number would be 0037012345678 (370 is country code and 12345678 is the receiver's phone number, all preceded by 00)

    Call Utilities

    Just like SMS Utilities, Call Utilities provide you with the possibility to issue certain commands to the router from your mobile phone. The list of possible rules is of course shorter because you can only make one type of call. Keep that in mind when creating Call Utilities rules because one call will trigger all of the enabled rules at once.

    Call Configuration

    To make a new rule, select what Action you want to make and press Add button.

    Every Call rule can be edited to your liking, just click the Edit button. This guide will contain information on editing every single Call Utilities rule.

    File:Networking trb manual mobile utilities edit call rule 1.png

    Call Configuration window is similar to SMS Configuration, but less complex.

    Call Configuration also has similar Authorization settings.

    File:Networking trb manual mobile utilities edit call rule auth.png

    Messages

    With the help of the Messages window you can read and send SMS messages.

    Read SMS

    In the Read SMS tab you can read and delete received/stored SMS messages. The layout is simple, there is a list of received SMS messages and you can choose how many entries of that list should be visible at one time with SMS per page drop box in the top left corner of the page and there is a Search field to help you navigate more efficiently through the list of messages in the top right corner of the page.

    File:Networking trb manual mobile utilities read sms v1.png

    Send Messages

    The Send Messages tab let's you send SMS messages from the router‘s SIM card. File:Networking trb manual mobile utilities send sms v1.png All you have to do is enter the recipient’s phone number, type in your message and hit the Send button.

    Storage

    In the Storage tab you can find settings associated with message storage.

    Field Value Description
    Save messages on SIM off | on; default: on If this is enabled, messages from SIM card will not be removed after they have been read
    Delete forwarded messages off | on; default: off If enabled, all forwarded messages will be automatically deleted
    Sim card memory - Information about used/available SIM card memory
    Leave free space Default: 5 How much memory (number of messages) should be left free

    [[Category:{{{name}}} Services section]]

    Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_mobile_utilities&oldid=65139"