TAP100 Powering Options
Main Page > TAP Access Points > TAP100 > TAP100 Manual > TAP100 Powering Options
This chapter contains information on powering options supported by TAP100 routers.
Passive PoE
The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use in other ports!)
- The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
- The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.