RUT230 Firmware Downloads

Main Page > EOL Products > RUT230 > RUT230 Firmware Downloads

FW downloads

This page contains various firmware versions for RUT2XX devices.

Note: packages for Package Manager are independent from firmware and can be downloaded in the Package Downloads page.


Firmware	Version	Changelog
Latest FW	RUT2_R_00.07.02.6	2022.08.24

FW checksums

A list of firmware checksums for RUT2XX firmwares uploaded in this page: checksum list

Notes

FW version RUT2_R_00.07.01 contains many major updates, some of which made certain functionalities of RUT230 no longer available to utilize. The full list of features that were removed since FW version RUT2XX_R_00.01.14.4 can be found here.

To successfully upgrade RUT230 from Legacy firmware (RUT2XX_R_00.01.14.1 and below) to RUTOS (RUT2_R_00.07.01 and up), you must first upgrade to the latest Legacy firmware (RUT2XX_R_00.01.14.3 and up) and then upgrade to latest RUTOS firmware. For example:
- It is not possible to upgrade from RUT2XX_R_00.01.14 to RUT2_R_00.07.01 and vice-versa;
- It is possible to upgrade from RUT2XX_R_00.01.14 to RUT2XX_R_00.01.14.4 first, then to RUT2_R_00.07.01 and vice-versa.

Changelog

RUT2_R_00.07.04.2 | 2023.04.18

New
- nftables support

Improvement
- Network
  - Added PDP profile registry and LTE SMS format functions & management for the Verizon network
  - Improved SIM detection algorithm
  - Improved Multi-APN connection establishment time
- WebUI
  - Improved Overview page performance
- System
  - Changed hostname to router name
  - Updated OpenSSL to version 1.1.1t
  - Updated CA certificates to version 20211016
  - Updated libiwinfo to version 2022-08-19

Fix
- Network
  - Fixed IPv4, IPv6 mobile connection restarts
  - Fixed operator scanning when mobile interface is disabled
  - Fixed data limit and tracking when software flow offloading is enabled
  - Added network reload call before bringing the mobile interface up
  - Fixed Port-based VLAN ID calculation issue
  - Fixed PDP context authentication when using special characters
- Services
  - Fixed event text for configurable inputs/outputs on I/O Juggler
  - Fixed I/O PIN3 value not changing via MODBUS TCP
  - Added I/O status request error handling in various WebUI pages when the I/O service is booting up
  - Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
  - Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
  - Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
  - Fixed OpenVPN keep alive setting migration issue
  - Fixed PPTP server name setting migration issue
  - Fixed missing WebUI issue caused by Email Relay installation
  - Fixed NTP's Operator Station Synchronization memory leak issue
  - Fixed test email validation
- System
  - Fixed libcares vulnerability CVE-2022-4904
  - Fixed frr vulnerability CVE-2022-37035
  - Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
  - Removed ability for non root users to edit scripts that get executed as root

RUT2_R_00.07.04.1 | 2023.03.24

Fix
- Network
  - Fixed Data Limit issue

RUT2_R_00.07.04 | 2023.03.07

Improvements
- WebUI
  - Improved data persistence between page refreshes
  - Improved page navigation behavior
  - Improved redirect logic to open configuration edit modals
  - Updated the 'Status -> Mobile' page
  - Updated interface card in the Overview page
  - Separated Sent and Received data bars on the chart in the Mobile Usage page
- Network
  - Added an info message displayed when a faulty SIM card is inserted
  - Added ResIOT operator's APNs to the APN database
  - Improved mobile connection re-establishment after reboot
  - Improved mobile connection recovery in cases where it was lost unexpectedly
  - Improved 'Deny data roaming' operation when switching between operators
  - Changed default WiFi AP cipher to CCMP (AES)
  - Added the logging of MAC addresses rejected by a WiFi AP
- Services
  - Added MQTT support to I/O Juggler
  - Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
  - Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
  - Added argument support for the 'Execute custom script' SMS rule
  - Added a frequency option 'schedule' Modbus Master
  - Added pagination to Events Reporting overview
  - Added limit to Events Reporting rule list
  - Added email logging for Events reporting
  - 'Sync with browser' button in the NTP page now also synchronizes the time zone
  - Added a limit of 30 for NTP instances
  - Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
  - Added "make before break" option to IPsec configuration
  - Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
  - Improved MODBUS Master connection handling to reduce connection count
  - Updated modbus request error messages
  - Added OpenVPN server ip block support
  - Added MQTT support for MODBUS Master alarms
  - Added the possibility to get the device's Ethernet port data via SNMP
- System
  - Updated bash to version 5.1.16
  - Added detailed FW update failure error message to Events Log
  - Improved firmware upload/validation error messages
  - Updated Turkish language support
  - Added protocol column to IP block page
  - Added "vpns.log" file to the Troubleshoot package
  - Added Wireguard tunnel information to the Troubleshoot package
  - Updated default admin group access rights
  - Updated DFOTA notification to show "More info" only when the update is forced

Fix
- WebUI
  - Fixed MAC address showing on mobile interfaces
  - Fixed mobile cell ID displaying in hexadecimal
  - Fixed mobile data limit card creation in the Overview page
  - Fixed modem widget disappearing from the Overview page
  - Fixed Services page not displaying data after Thingworx package is installed
- Network
  - Fixed interface priority change issue
  - Fixed a Custom Firewall Rule editing issue
  - Fixed DMZ configuration saving while it is disabled
  - Fixed Port Scan script execution failure
  - Fixed Firewall zone duplication issue
  - Fixed call function when VoLTE is disabled
  - Fixed VoLTE control when IMS is not enabled
  - Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
  - Fixed APN authentication when using empty credentials
  - Fixed manual APN selection from list
  - Fixed disabled WiFi interface after factory reset
  - Fixed WiFi interface creation with SAE mixed encryption
- Services
  - Fixed I/O Scheduler overlapping instances issue
  - Fixed Input/Output image pin colors
  - Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
  - Fixed WiFi Hotspot landing page uploaded theme image display
  - Fixed WiFi Hotspot trial user deletion issue
  - Fixed WiFi Hotspot service crash when associated WiFi interface is not up
  - Fixed WiFi Hotspot password request by SMS
  - Fixed WiFi Scanner starting process when the WiFi interface is disabled
  - Added limitations on message size and quantity of email messages in Email to SMS
  - Fixed SMTP HELLO value parsing issue
  - Fixed SMS message window reset button
  - Fixed not being able to save empty 'Message text' field in Auto Reply
  - Fixed multi-part SMS concatenation
  - Fixed multi-part SMS processing
  - Fixed SMS error message on 'Mobile Data Reset' action
  - Fixed Data To Server JSON format %n, %N and %s flag issues
  - Fixed Events Reporting email data clean
  - Fixed Events Reporting missing config selections
  - Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
  - Fixed IPsec instance deletion after removing DMVPN package
  - Fixed IPSec migration via Backup file when DMVPN is configured
  - Fixed IPsec naming issue when the includes an equals sign
  - Fixed L2TP client to use correct interface on failover events
  - Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
  - Fixed MODBUS database size limiting issue
  - Fixed MODBUS MQTT Gateway client ID input
  - Fixed MODBUS TCP Slave RSSI value
  - Fixed MODBUS test button returning errors when several non-connected devices are configured
  - Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
  - Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
  - Fixed OpenVPN Static Key configuration saving by making Static key upload required
  - Fixed OpenVPN TLS client creation issue while LAN is down
  - Fixed Package Manager displaying non-existent packages
  - Fixed Package Manager errors showing up after successful installations
  - Fixed Periodic Reboot entry duplication after a power cycle
  - Fixed PPTP 'Client to client' option not being applied after save
  - Fixed receiving excessive device state emails after a reboot is initialized over RMS
  - Fixed WebUI unavailability after unsuccessful package install
- System
  - Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
  - Fixed bash vulnerability CVE-2022-3715
  - Fixed CGI-IO file download vulnerability CVE-2022-38333
  - Fixed libxml2 vulnerability CVE-2022-40304
  - Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
  - Fixed LED animation during firmware upgrade
  - Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
  - Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
  - Improved file upload logic
  - Fixed GPL firmware compilation with selected Tinc package
  - Fixed OpenVPN Static Key migration via keep settings issue
  - Fixed NTP time zone name setting migration when the name contains whitespaces
  - Fixed language setting issue
  - Fixed integer validation on industrial services
  - Fixed LED indications when PDP type is IPv6
  - Fixed issues with PDP type and SMS limit period migration via keep settings

RUT2_R_00.07.03.4 | 2023.02.09

Fix
- Network
  - Changed generic modem restart method
  - Fixed mobile page VoLTE switching issues
- Services
  - Sanitized tcpdump storage location
- System
  - Fixed legacy backup upload
  - Fixed upgrade from legacy FW issue with keep settings

RUT2_R_00.07.03.3 | 2023.01.25

Fix
- Network
  - Fixed disabled WiFi interface after factory reset

RUT2_R_00.07.03.2 | 2023.01.13

New
- System
  - Japanese language

Improvements
- Network
  - Optimized mobile netifd script installation

Fix
- Network
  - Shortened modem hang monitor timeout
  - Fixed VLAN option setting when changing VLAN ID

RUT2_R_00.07.03.1 | 2023.01.03

Improvements
- System
  - Remove front-end certificate validation
- Network
  - Optimized mobile netifd script installation

Fix
- Network
  - Fixed modem communication validation
  - Fixed connection establishment in IPv6 only mode
- Services
  - Fixed libxml2 vulnerability CVE-2022-40303
  - Fixed an IPsec Phase one & two setting migration issue
  - Fixed OpenVPN migration from legacy firmwares
  - Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
- System
  - Fixed JSON key parsing; keys can now be any printable character sequence
  - Fixed memory leak in 'session' module
- WebUI
  - Fixed file pretty name parsing

RUT2_R_00.07.03 | 2022.12.16

New
- Network
  - Firewall DMZ page
- Services
  - Java package
  - SFTP server support
  - OPC UA client
  - Hotspot registered users management page
- System
  - Portuguese language
  - Spanish language
  - Turkish language
  - Email Relay package
- WebUI
  - New Web menu design

Improvements
- Network
  - Updated modem handling, attachment, tracking and connection establishment processes
  - Added the possibility to select multiple ports in all firewall port fields
  - Added 'Match' traffic by type option to firewall traffic rules
  - Added DNS servers and routing table fields to the Wireguard page
  - Improved generating network topology
  - Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
  - Update Firewall Traffic Rules page with DSCP and MARK options
  - Added keepalive, holdtime and connect timers to BGP configuration
  - Added 'Use gateway metric' to network protocols web interface
  - Added more DHCPv6 client events to system log
  - Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
  - Added option to select subnet parameters in mobile Passthrough/Bridge modes
  - Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
  - Added mobile connection state for IPv6
  - Added individual WiFi toggle support
  - Added error message when DFS channel is selected during scanning
- Services
  - Added CSP headers to Hotspot Landing Page
  - Added hotspot user script validation
  - Improved logging of disconnecting client devices
  - Implemented Hotspot 'forget' method, which removes user from DB by MAC
  - Added execute custom script SMS Utilities rule
  - Added receiver and transceiver mode support to SMPP
  - Added timezone synchronization with GSM operator option to NTP Client
  - Updated Zerotier web interface
  - Added IPsec Flush connection option on tunnel initialization
  - Added MODBUS slave regfile validation
  - Added delay, number of timeouts, always reconnect options to MODBUS Master service
  - Added DMVPN Phase 2 and Phase 3 support
  - Added synchronization counting to NTP client
  - Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
  - Added 'Unregister' button to RMS page
  - Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
  - Updated Zerotier package to version 1.10.1
  - Added automatic package removal upon failed installation in Package Manager
  - Added option to describe custom routing table and MTU auto counting to Wireguard VPN
  - Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
  - Updated sqm-scripts to version 1.5.1
  - Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
  - Added monthly reboot option to periodic reboot function
  - Added support for multiple custom option selection to SSTP configuration
  - Added PKCS12 certificate chain support to OpenVPN
  - Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
  - Added QoS selection to MQTT Modbus Gateway
  - Improved RAM usage during upload and installation of packages via Package Manager
  - Updated curl to version 7.86.0
  - Added brute-force prevention measures to Post/Get
  - Added automatic private and public key generation to Wireguard VPN
  - Added multiple Remote source IP support to IPsec
  - Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
  - Added functionality to rotate log file when log is saved to Flash memory
  - Improved performance while fetching packages on repeat visits to the Package Manager page
- System
  - Added a 'test mail' button to the Administration -> Recipients page
  - Added option to clear blocked IPs in the Access Control page after reboot
  - Updated Web Request-Response core logic
  - Added certificate validation to all services that support certificate upload
  - Updated URL protocol validations
  - Removed profile update requests during Save & apply
  - Optimized profile switching logic
- WebUI
  - Added an indication to the Interfaces page that displays when data limit is enabled
  - Added bootloader version to the Device section in the System page
  - Added configuration page shortcuts to Overview page widgets
  - Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
  - Updated network interfaces protocols web interface
  - Updated 404 page to include navigation menu

Fix
- Network
  - Fixed jumbo frames MTU issue
  - Added the 'Any' choice to source & destination IP address field in NAT rule edit
  - Fixed NHRP web interface issues
  - Fixed WAN interface configuration interfering with LAN
  - Fixed mdcollect memory leak issue
  - Fixed data limit not resetting properly
  - Fixed incorrect mobile data usage calculations for multiple day periods
  - Fixed an Auto APN 'Keep settings' issue
  - Fixed data counting after mobile data limit has been reached
  - Fixed mobile band not setting correctly on first try
  - Fixed incorrect data limit conditions causing unwanted SIM switches
  - Fixed Passthrough DHCP lease time setting
  - Fixed mobile bridge mode issue when no DNS servers are supplied
  - Added new Operator Lists instance name validations
  - Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
  - Fixed wireless interfaces connections not reestablishing after disabling & enabling again
  - Added wget tracking method to WAN Failover
  - Added interface checks to remove inaccurate Failover events from the Event Log
  - Fixed Wired WAN connectivity issue when Failover interfaces are disabled
  - Fixed Failover fallback issue
- Services
  - Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
  - Fixed relay state switching
  - Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
  - Added I/O restart on configuration profile change
  - Fixed I/O voltage range display for power socket pins
  - Fixed SMNP OID for I/O state
  - Fixed I/O Juggler SMS text message Save & Apply issue
  - Fixed Hotspot connected user list maximum upload/download value limits
  - Fixed incorrect connected Hotspot user information in RMS JSON
  - Removed unnecessary field from the Port Mirroring page
  - Fixed Hotspot issues related to specific connected phones
  - Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
  - Fixed WiFi Scanner hostname validation issues
  - Fixed UCI SMS Rule return message to display new changes
  - Fixed DNP3 issues when asking for modem temperature
  - Fixed base64 encoding of SMS messages when forwarding to HTTP
  - Fixed SMS sending issues when using multiple APN
  - Added Gateway modem option to IP Block and WoL in SMS Rule edit
  - Fixed unblocking IP addresses with an SMS message
  - Fixed Mobile Utilities page not load properly on some occasions
  - Fixed dbus vulnerability CVE-2020-35512
  - Fixed dnsmasq vulnerability CVE-2022-0934
  - Fixed ext4 vulnerability CVE-2021-3428
  - Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
  - Fixed libxm12 vulnerability CVE-2022-29824
  - Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
  - Fixed MQTT DoS vulnerability CVE-2021-41039
  - Fixed privoxy vulnerability CVE-2021-44542
  - Fixed python3 vulnerability CVE-2022-42919
  - Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
  - Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
  - Fixed switching between RMS connection types while the device is unregistered
  - Fixed reload issues in website blocking feature
  - Fixed IPsec PSK secret required field validation
  - Fixed bandwidth limiting after QoS is enabled for the first time
  - Fixed Dropbear issues when logging in over IPv6
  - Fixed Modbus status in Status -> Services page
  - Fixed Azure IoT Hub application issues when sending large volumes of data
  - Fixed Azure IoT Hub MQTT password validation
  - Fixed DMVPN configuration migration issue
  - Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
  - Fixed DMVPN IPsec connection issue
  - Fixed DMVPN mobile interface 'Keep settings' migration issue
  - Fixed Dynamic DNS long hostname text display issue
  - Fixed Events Reporting memory leak issue
  - Fixed Events Reporting not triggering after flipping an I/O slider
  - Fixed FOTA cron job not starting after factory reset
  - Fixed IPsec local firewall option parsing
  - Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
  - Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
  - Fixed NTP pool hostname validation
  - Fixed OpenVPN certificate remove with Static key and TLS authentication methods
  - Fixed OpenVPN configuration saving issue when using HMAC key authentication
  - Fixed OpenVPN custom dev name transformation to correct format
  - Fixed OpenVPN device name setting logic when uploading config from file
  - Fixed OpenVPN instance status display
  - Fixed OpenVPN TAP (bridged) configuration detection
  - Fixed Qos configuration saving issue occurring after instance deletion
  - Fixed RMS JSON incorrect WAN state and IP information
  - Fixed RMS step access issue in the Setup Wizard page
  - Fixed SNMP issues after reboot while using a Hotspot
  - Fixed SNMP generating MIB files for devices in accordance with to their hardware
  - Fixed SNMP traps not working after SNMP is installed from server
  - Fixed SSTP client route creation issue
  - Fixed UPNP secure mode not turning off issue
  - Fixed Wireguard route to endpoint issue
  - Fixed manual package installation for queued packages
  - Fixed NAT Rules dependency from IPsec web instance
  - Returned usleep utility
  - Updated Australian and South African NordVPN server IP addresses
- System
  - Fixed certificate signing issues
  - Fixed Telnet, CLI access blocking after max invalid tries
  - Fixed FW upgrade with 'Keep settings' while low free space is available
  - Fixed backup file duplication issue
  - Fixed network device handling in system
- WebUI
  - Fixed Hotspot interface display
  - Fixed side widget accessibility during first login
  - Fixed file upload issues
  - Fixed drag and drop issue in the Traffic Rules page
  - Fixed protocol display in the overview of the Interfaces page
  - Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
  - Fixed login errors after browser tab restoration
  - Fixed redirect to newly set IP address after Interface configuration
  - Fixed firmware upgrade verify spinner not closing
  - Fixed an issue with file upload via drag and drop

RUT2_R_00.07.02.7 | 2022.09.12

Improvements:
- Improved manual-auto connection mode

Fixes
- Fixed AT command for SMS storage usage
- Fixed CVE-2022-1012 memory leak vulnerability
- Fixed CVE-2022-37434 kernel vulnerability
- Fixed interface option reset after VLAN ID change
- Removed memory leak on port events
- Fixed WiFi Scanner out of range crash when iterating collected data

RUT2_R_00.07.02.6 | 2022.08.24

Improvements:
- Added 'home.vodafone.de' APN
- Improved stability of device information storage

Fixes:
- Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
- Fixed Serial-symlink dmesg messages
- Fixed OpenVPN tls-auth and tls-crypt option names

RUT2_R_00.07.02.5 | 2022.08.12

Improvements:
- Updated curl to version 7.83.1
- Updated firmware validation error messages
- Added multiple source IP address support to the Port Forwards page
- Increased custom APN Username & Password field maximum length to 64 symbols
- Added auto switch to modem's SMS storage when SIM card storage doesn't exist
- Improved mobile connection status handling
- Added CSP headers Hotspot WebUI landing page

Fixes:
- Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
- Fixed CVE-2022-30065 busybox vulnerability
- Fixed file upload path traversal
- Removed Data to Server limit to proccess less than 10 instances
- Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
- Fixed OpenVPN dev setting logic
- Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
- Fixed MAC and leasetime setting for Bridge & Passthrough modes
- Fixed modal tabs navigation when editing wireless interface with non-english languages

RUT2_R_00.07.02.4 | 2022.07.20

Improvements:
- Added default password change warning message before firmware downgrade
- Extended time period for device to make connection to operator
- Reduced the number of modem reboots when changing mobile settings
- Reduced excessive log output when no SIM card is inserted
- Added modem restart prevention on modem init
- Added disable RPLMN option in the SIM section of the SIM card config

Fixes:
- Fixed CVE-2022-2068 vulnerability
- Disabled autoconnect on stop-network call
- Fixed Hotspot login via landing page issue

RUT2_R_00.07.02.2 | 2022.06.27

Improvements:
- Added ping to DNS IPv6 support
- Added modem reset to default state after device FW upgrade
- Modem init now checks NVRAM sensitive commands before setting
- GSM output was made consistent
- Updated FSTools package to version 2022-05-03
- Added security headers to web requests

Fixes:
- Fixed CVE-2019-12900 libbz2 vulnerability
- Fixed behavior of some gsmctl commands
- Fixed CVE-2022-23303 hostapd vulnerability
- Fixed CVE-2022-29581 Linux kernel vulnerability
- Fixed CVE-2022-29458 ncurses vulnerability
- Fixed CVE-2022-1292 c_rehash script command injection vulnerability
- Fixed band locking issue
- Fixed race condition for wireless configuration initialization
- Fixed operator control issue

RUT2_R_00.07.02.1 | 2022.06.06

Improvements:
- Improved GSM related messages in Troubleshoot logs

Fixes:
- Fixed IGMP Proxy menu item not appearing after package installation
- Fixed default mobile network configuration generation
- Fixed MODBUS write requests and Mobile Utils option setting

RUT2_R_00.07.02 | 2022.05.23

New features
- Overview side widget
- IGMP Proxy
- Privileged Access Management (PAM)
- AWS Greengrass support
- HTTPS certificate and key upload feature
- SSH public keys edit box
- License page
- DNP3 data for Data to Server

Improvements
- Updated busybox to version: 1.34.1
- Updated curl to version 7.79.1
- Added iptables filter package for string filtering
- Added CHAP authentication for L2TP VPN
- Added IPv6 support for L2TPv3 VPN
- Added EAP-MSCHAPV2 authentication method for IPsec VPN
- Added IPv6 support to Auto Reboot
- Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
- Updated SNMP version 5.9.1
- Added OpenSSL authentication options to SNMPv3
- Added support for OSPF redistribution options and OSPF neighbors
- Added password field to BGP Peers page
- Extended BGP "AS" field validation to accept integers up to 4294967295
- Added "DHE+RSA" to OpenVPN cipher selections
- Increased OpenVPN max password length from 128 bytes to 512 bytes
- Made HMAC key direction initial value dependent on the role of the instance (client or server)
- Made HMAC key and HMAC authentication key upload fields required
- Added DES to IPsec encryption algorithms selections
- Added special character support for CHAP secrets
- Added validation requirements for PPTP user list username field
- Added option to manually enter Public key in Wireguard configuration
- Made generating Wireguard keys possible only while in auto mode
- Added Events Log database to troubleshoot archive
- Added RFC1918 filter field
- Added the possibility to unblock multiple blocked devices at once
- Added 'Port' column to blocked login attempts table
- Added Speedtest server refresh
- Updated Speedtest server list
- Added asterisk option to Site Blocking
- Added MD5 and SHA256 checksums to package validation page
- Changed certificate requirements to only require client key file if client certificate is used
- Added pagination and data retention between table pages
- Added pagination functionality to tables when there are more than 10 records
- Improved table sorting by saving user provided sort settings in the browser
- Improved drag and drop functionality
- Added the possibility to drag and drop files onto upload components
- Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
- Added 'Strict-Transport-Security' response header for HTTPS
- Added 'breadcrumbs' to modal windows
- Improved initial WebUI loading after login
- Added mobile bytes sent and bytes received SNMP OIDs
- Added mobile LED turn off feature ('System -> Administration' page)
- Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
- Updated mobile usage data point calculation logic
- Added the possibility to manually enter operator number
- Improved obtain mobile cell ID process
- Added modem restart if SIM card is removed during APN database fetching process
- Added unauthorized call logging
- Added space character support in SMS commands
- Disabled SMS modem storage configuration form when SIM is not inserted
- Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
- Added external modem SMS limit Overview card and widget
- Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
- Added duplicate value check for list configuration options
- Changed mobile card instance design
- Fixed 'Mobile Data usage reset' SMS rule
- Fixed the default state parameter of SMS list POST/GET command
- Added Hotspot configuration profiles
- Added local Hotspot user password hashing
- Added Hotspot password encoding option
- Improved Hotspot related firewall rule setting
- Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
- Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
- Added ubus support to Hotspot
- Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
- Added I/O SNMP trap
- Added ISO 8601 time format to I/O Juggler's '%ts' parameter
- Added device name parameter '%pc' to I/O Juggler
- Added PPPoE VLAN priority support
- Made VRRP ping section dependent on main instance
- Added 'WAN to LAN' switch

Fixes
- Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
- Fixed CVE-2022-28391 busybox vulnerability
- Fixed CVE-2018-16789 shellinabox vulnerability
- Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
- Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
- Fixed zlib backport security issue
- Fixed Wireguard firewall zone assignment
- Fixed queued packages disappearing from list after FW upgrade with keep settings
- Fixed error message display for multiple input validation rules
- Fixed incorrect DHCP validation range for start and limit fields
- Removed 'Bring up on boot' option from network interface configuration pages
- Fixed coma-separated DHCP options disappearing after save
- Fixed exclude and listen interfaces
- Fixed 'Use broadcast flag' option saving
- Fixed firewall zone assignment when creating new interfaces
- Fixed OpenVPN 'Netmask' and 'IP address' field validations
- Fixed OpenVPN TAP configuration saving issue
- Fixed OpenVPN switching to TUN mode when uploading a configuration from file
- Fixed dynamic BGP route state display
- Fixed BGP peer enable in edit page
- Fixed issue when no L2TP client instance could be bound to IPsec
- Fixed firewall rule and zone behavior related to config section creation
- Added default value for L2TPv3 netmask, which is now written to config after save
- Fixed passthrough option saving to IPsec file
- Fixed DMVPN issue where instance configuration could not be saved
- Fixed Wireguard peer could not be saved issue
- Fixed NTP client time synchronization after factory reset
- Fixed device time display with selected time zone
- Fixed MODBUS TCP indexation missing bracket issue
- Fixed initial MODBUS TCP request count validation
- Fixed PIN 3/4 direction switching over MODBUS TCP
- Fixed MODBUS data to MQTT socket closing issue when connection fails
- Fixed MODBUS alarm configuration deletion
- Fixed DNP3 master not working after FW upgrade with 'keep settings'
- Fixed DNP outstation not returning error messages
- Added missing SNMP objects: mobile IP, data sent/received today
- Fixed MQTT Publisher 'Remote address' field validation
- Fixed long interface name support for Azure IoT Hub
- Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
- Fixed missing sent/received data issue
- Fixed URL input field length validation
- Fixed admin login issue after upload of backup from a device with older firmware versions
- Fixed MAC address formatting in Events reporting messages
- Fixed Events reporting DHCP lease message spam, when no new lease is added
- Fixed logging crashing after downloading Troubleshoot file
- Made Wake on LAN visible only on devices with Ethernet ports
- Fixed Traffic log file transfer to FTP server
- Fixed Web Filter service reloading after a host list file is uploaded
- Fixed access denied messages when sending JSON-RPC requests from root user
- Fixed error message display about duplicated intervals in Profile scheduler
- Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
- Corrected OSPF Routing card values, value positions and names
- Fixed global secret instances not being removed when there are no IPsec instances
- Fixed uploaded file remove icon not staying in position on hover
- Fixed Overview card collapse issue that made it unresponsive after too many clicks
- Removed WAN6 interface from the Overview page
- Fixed mobile IPv6 display in Events Reporting status messages
- Fixed Bridge mode when DNS2 is not available
- Fixed PAP/CHAP username and password fields not saving in interface edit window
- Fixed sending email without secure connection for providers that support such an option
- Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
- Fixed Call Utilities Events Log message for reboot rule
- Fixed SMS command validation for no-authorization option
- Fixed MODBUS SMS alarms 'Enable' option saving
- Fixed running RMS with no SIM card inserted issue
- Fixed firmware available on server version checking issue
- Fixed CVE-2020-15078 openvpn vulnerability
- Fixed storage calculation for packages
- SMS Utilities: enhanced service security
- Fixed firmware deletion after leaving the page
- Fixed setup wizard redirect after LAN IP change
- Fixed various validation bugs, typos, option hints & alignments
- Fixed multiple IPv6 configuration field validations
- Fixed PDP logging for Verizon operator
- Added multiwan support for Wireguard default route
- Fixed wireless signal strength display when no clients are connected
- Fixed loss of connectivity for clients when router is in STA+AP mode
- Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
- Fixed Wifi Scanner data not being stored in certain scenarios
- Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
- Fixed Hotspot user group limit not resetting on specified time
- Removed an RMS error message when no Hotspot users were created
- Fixed Hotspot landing page image upload issue
- Fixed relay output value display in I/O Juggler condition page
- Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
- Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
- Fixed I/O Juggler's incorrect I/O status messages
- Fixed APN migration if APN was selected from APN list on legacy firmware
- Fixed RIP configuration migration from legacy firmware versions
- Fixed Wireguard interface status setting migration from legacy firmware versions
- Fixed default config options for SSH and Web access SMS Utilities rules

RUT2_R_00.07.01.4 | 2022.02.25

Improvements
- Increased Port Forwards rule max name length
- Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler

Fixes
- Added missing bracket to the end of MODBUS messages
- Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
- Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
- Fixed firewall extra option validation
- Fixed Hotspot enable button validation
- Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
- Changed the logic of uploading files to the modem
- Fixed second mobile interface creation issue
- Fixed usage of custom headers in I/O Juggler HTTP action
- Fixed 'verify' option parsing for I/O Juggler
- Fixed OpenVPN server configuration with password authentication
- Fixed NTP interval length validation
- Fixed network interface enable after Drag & Drop
- Updated NTP client interval to 24h
- Fixed connection to whitelist carriers
- Fixed Passthrough mode when DHCP is disabled
- Fixed 'Deny data roaming' feature
- Fixed mobile blocking dependency on region
- Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

RUT2_R_00.07.01.2 | 2022.01.04

New features
- DFOTA modem upgrade system for Quectel modems

Improvements
- Removed L2TP section title prefixes

Fixes
- Fixed IPSec crashing issue using mobile
- Fixed FW flashing when chip is in unknown state
- Fixed CPU usage percentage display in the Overview page
- Fixed FOTA timeout issue when server does not respond
- Fixed installation of backup packages
- Fixed mobile data limit display after profile change
- Fixed Bridge mode without multi-APN
- Fixed multi mobile interface checking
- Fixed error handling when the modem is not responding
- Prolonged autoconnect setting timeout

RUT2_R_00.07.01 | 2021.11.18

Note: Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.

New features
- RUTOS WebUI