Template:Networking tsw100 faq power consumption table
From Teltonika Networks Wiki
Revision as of 15:52, 25 August 2022 by ErnestasB (talk | contribs) (RUTX are not active poe devices)
Test type | ||
---|---|---|
Idle (12 V) | ||
Idle (24 V) | ||
Idle (44 V) | ||
Idle (50 V) | ||
Idle (57 V) |
Test type | ||
---|---|---|
5 LAN devices connected + heavy data traffic1 (12 V) | ||
5 LAN devices connected + heavy data traffic1 (24 V) | ||
5 LAN devices connected + heavy data traffic1 (44 V) | ||
5 LAN devices connected + heavy data traffic1 (50 V) | ||
5 LAN devices connected + heavy data traffic1 (57 V) |
Test type | ||
---|---|---|
4 PoE devices connected + heavy data traffic1 (44 V) | ||
4 PoE devices connected + heavy data traffic1 (50 V) | ||
4 PoE devices connected + heavy data traffic1 (57 V) |
Test type | ||
---|---|---|
4 PoE dummy loads connected (30 W each) (44 V) | ||
4 PoE dummy loads connected (30 W each) (50 V) | ||
4 PoE dummy loads connected (30 W each) (57 V) |
1 - Data streams between devices were created using iPerf.
Power consumption may differ due to connected devices, testing environment and conditions.