Changes

==Configuring Modbus serial master==

==Configuring Modbus serial master==

Open router’s WebUI, navigate to '''Services > Modbus > Modbus Serial Master''' and apply the following configuration.

Open router’s WebUI, navigate to '''Services → Modbus → Modbus Serial Client''' and in Serial Device configuratio section '''add new instance''' by entering a name, selecting '''rs232''' and pressing [[File:Add Button.png|60x90px]] button. In the newly opened Device Configuration window configure everything as follows:

 

        <th width=330; style="border-bottom: 1px solid white;></th>

        <th width=800; style="border-bottom: 1px solid white"; rowspan=2>[[File:Modbus Serial RUT955 1.png|border|class=tlt-border|755x406px|right]]</th>

# '''Enable''' instance;

# Select '''Baud rate''' (9600, it must match slave‘s baud rate);

# Press [[File:Networking save apply button fw76 v1.png|100x35px]] button.

[[File:Modbus_serial_rut955_1.png|border|class=tlt-border|1100x700px]]

[[File:Modbus_serial_rut955_1.png|border|class=tlt-border|1100x700px]]

Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.

Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.