403
edits
Changes
VXLAN Configuration Example Lukas Demo (view source)
Revision as of 11:43, 20 September 2024
, 20 September→Configuring the Wired WAN Interface on RUT1 and RUT2
==Configuration of VXLAN over Wired WAN==
==Configuration of VXLAN over Wired WAN==
In this section, the setup of VXLAN over Wired WAN using RUT1 and RUT2 devices will be described. The process will show how to create a VXLAN tunnel to connect the devices and allow them to communicate over the wired network.
In this section, the setup of VXLAN over Wired WAN using RUT1 and RUT2 devices will be described. The process will show how to create a VXLAN tunnel to connect the devices and allow them to communicate over the wired network.
===Configuring the Wired WAN Interfaces===
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.
The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface.
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]
[[File:Vxlan_over_wan_config_rut1_wan_p1.png|border|class=tlt-border]]