The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface. | The same steps will be followed to configure the WAN interfaces on RUT1 and RUT2, which will be on the same subnet but with different IP addresses, enabling communication between them. On both routers, navigate to the '''Network > WAN''' section in the WebUI, then click the '''Edit''' button for the wired WAN interface. |