Line 33: |
Line 33: |
| [[File:LAN TO WAN03.jpg|border|class=tlt-border]] | | [[File:LAN TO WAN03.jpg|border|class=tlt-border]] |
| </ul> | | </ul> |
− |
| |
| | | |
| After saving settings, you will be redirected back to '''Network -> VLAN -> LAN Network''', now you need to open VLAN Network tab in the same window and you will need to: | | After saving settings, you will be redirected back to '''Network -> VLAN -> LAN Network''', now you need to open VLAN Network tab in the same window and you will need to: |
| <li>1. Select VLAN mode: Port based</li> | | <li>1. Select VLAN mode: Port based</li> |
− | <li>2. For the first row “VLAN ID –1” select “lan” in the LAN section, enable wireless access and turn ofF LAN port 3 '''(which will be used as WAN port)''' and press “Save”.</li> '''Note:''' Make sure that you are not connected to that LAN port which you going to disable. | + | <li>2. Currently LAN interface:</li> |
− | <li>3. Click '''“Add”''' new row will appear “VLAN ID -2” turn of LAN ports 1,2 and leave only LAN port 3 on, and select “lan_wan” in the LAN section and press '''“Save”'''.</li> | + | - Enable wireless access<br> |
| + | - Select your currently LAN interface.<br> |
| + | - Turn off LAN port 3 '''(which will be used as WAN port)'''<br> |
| + | - Press “Save”. |
| + | <div style="color: red;"> '''Note: Make sure that you are not connected to that LAN port which you going to disable.'''</div> |
| + | <li>3. New LAN_WAN interface:</li> |
| + | - Click '''“Add”''' and new row will appear.<br> |
| + | - Turn off LAN ports 1,2leave only LAN port 3 on.<br> |
| + | - Select “lan_wan” in the LAN section and press '''“Save”'''. |
| [[File:LAN TO WAN05.jpg|border|class=tlt-border|600px]] | | [[File:LAN TO WAN05.jpg|border|class=tlt-border|600px]] |
| | | |
− | ==CLI/SSH Router configuration '''(RUT 2)'''== | + | ==CLI/SSH Router configuration== |
| For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br> | | For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br> |
| [[File:LAN TO WAN06.jpg|border|class=tlt-border|400px]] | | [[File:LAN TO WAN06.jpg|border|class=tlt-border|400px]] |