0
edits
Changes
Template:Networking rutxxx configuration example use LAN as WAN (view source)
Revision as of 18:48, 21 February 2020
, 18:48, 21 February 2020no edit summary
[[File:LAN TO WAN03.jpg|border|class=tlt-border]]
[[File:LAN TO WAN03.jpg|border|class=tlt-border]]
</ul>
</ul>
After saving settings, you will be redirected back to '''Network -> VLAN -> LAN Network''', now you need to open VLAN Network tab in the same window and you will need to:
After saving settings, you will be redirected back to '''Network -> VLAN -> LAN Network''', now you need to open VLAN Network tab in the same window and you will need to:
<li>1. Select VLAN mode: Port based</li>
<li>1. Select VLAN mode: Port based</li>
<li>2. For the first row “VLAN ID –1” select “lan” in the LAN section, enable wireless access and turn ofF LAN port 3 '''(which will be used as WAN port)''' and press “Save”.</li> '''Note:''' Make sure that you are not connected to that LAN port which you going to disable.
<li>2. Currently LAN interface:</li>
<li>3. Click '''“Add”''' new row will appear “VLAN ID -2” turn of LAN ports 1,2 and leave only LAN port 3 on, and select “lan_wan” in the LAN section and press '''“Save”'''.</li>
- Enable wireless access<br>
- Select your currently LAN interface.<br>
- Turn off LAN port 3 '''(which will be used as WAN port)'''<br>
- Press “Save”.
<div style="color: red;"> '''Note: Make sure that you are not connected to that LAN port which you going to disable.'''</div>
<li>3. New LAN_WAN interface:</li>
- Click '''“Add”''' and new row will appear.<br>
- Turn off LAN ports 1,2leave only LAN port 3 on.<br>
- Select “lan_wan” in the LAN section and press '''“Save”'''.
[[File:LAN TO WAN05.jpg|border|class=tlt-border|600px]]
[[File:LAN TO WAN05.jpg|border|class=tlt-border|600px]]
==CLI/SSH Router configuration '''(RUT 2)'''==
==CLI/SSH Router configuration==
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>
For the next part you will be configuring router via SSH. For this you need to use the command line interface (CLI) or a SSH software if you’re using Windows or iOS. In this example software '''“putty”''' will be used. Open “putty” enter routers LAN IP address and press '''“Open”'''.<br>
[[File:LAN TO WAN06.jpg|border|class=tlt-border|400px]]
[[File:LAN TO WAN06.jpg|border|class=tlt-border|400px]]
