Open main menu
Home
Random
Log in
Settings
COMMUNITY
ABOUT
Disclaimers
Teltonika Networks Wiki
Search
Changes
← Older edit
Newer edit →
Template:Networking rut955 manual modbus serial
(view source)
Revision as of 17:08, 10 March 2020
601 bytes added
,
17:08, 10 March 2020
→Creating server
Line 76:
Line 76:
==Creating server==
==Creating server==
−
In order to test the functionality you will need to setup Server (you can
setup
server on the same computer you
used
as a slave simulator).
+
In order to test the functionality you will need to setup Server (you can
run a
server on the same computer you
use
as a slave simulator).
In the topology below you can find information on how the device and server are connected.
In the topology below you can find information on how the device and server are connected.
Line 91:
Line 91:
And that is it, now you will be able to see the data coming from Modbus in the Received data section.
And that is it, now you will be able to see the data coming from Modbus in the Received data section.
+
+
==Modbus data to server==
+
+
In order to setup your router to send Modbus data to server you will need to navigate to '''Services > Modbus > Modbus Data to Server'''.
+
+
[[File:|border|class=tlt-border]]
+
+
# Select '''Protocol''' (In this example HTTP(S) will be used).
+
# Enter '''IP''' and '''port''' of the PC with the Hercules software.
+
# Enter '''Period''' (minutes, how often router should send data to server).
+
# Click '''ADD'''.
+
+
Then you will be redirected to '''Advanced sender settings'''.
+
+
[[File:|border|class=tlt-border]]
+
+
# Enter '''Name''' (It can be anything you want).
+
# Click '''Save'''.
Justinasm
0
edits