0
edits
Changes
Template:Networking rut955 manual modbus serial (view source)
Revision as of 17:13, 10 March 2020
, 17:13, 10 March 2020no edit summary
# Press '''Save'''.
# Press '''Save'''.
==Creating server==
==Modbus data to server==
===Creating server===
----
In order to test the functionality you will need to setup Server (you can run a server on the same computer you use as a slave simulator).
In order to test the functionality you will need to setup Server (you can run a server on the same computer you use as a slave simulator).
And that is it, now you will be able to see the data coming from Modbus in the Received data section.
And that is it, now you will be able to see the data coming from Modbus in the Received data section.
==Modbus data to server==
===RUT Modbus data to server configuration===
----
In order to setup your router to send Modbus data to server you will need to navigate to '''Services > Modbus > Modbus Data to Server'''.
In order to setup your router to send Modbus data to server you will need to navigate to '''Services > Modbus > Modbus Data to Server'''.
# Enter '''Name''' (It can be anything you want).
# Enter '''Name''' (It can be anything you want).
# Click '''Save'''.
# Click '''Save'''.
===Receiving data===
----
Open Hercules again, press '''Listen''' and you should start receiving Modbus Data messages.
[[File:|border|class=tlt-border]]
Try to change some data in the Modbus Slave simulator.
[[File:|border|class=tlt-border]]
Received data should change.
[[File:|border|class=tlt-border]]
==Slave alarms==
