802.11r WiFi roaming configuration example

From Teltonika Networks Wiki
Revision as of 03:58, 26 September 2024 by Eward.Z (talk | contribs)

Introduction

This article provides a basic configuration example of WiFi roaming.

Firmwware

The information in this page is updated in accordance with 00.07.09 firmware version. .

Prerequisites

  • Main gateway with WAN access (Any RUTOS router. RUTX50 is used in this example)
  • Access Points (Any WiFi-capable RUTOS device. RUTX11 (Router 1) and RUTX50 (Router 2) are used in this example)

Before you start configuring the router turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.


Configuration

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=802.11r_WiFi_roaming_configuration_example&oldid=133032"