Noip IPv6 DDNS Configuration

From Teltonika Networks Wiki
Revision as of 01:56, 17 May 2022 by Adevis (talk | contribs) (Created page with "==Summary== This article will guide you through configuring an '''IPv6 DDNS''' AAAA record on noip.com and creating an instance on RUT routers. ==Prerequisite== To use the...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Summary

This article will guide you through configuring an IPv6 DDNS AAAA record on noip.com and creating an instance on RUT routers.

Prerequisite

To use the IPv6 DDNS service, you must have a Static or DynamicIPv6 Global Unicast Address (GUA) configured in your router WAN interface. Otherwise, it will not work. You can click on the following link to get more information about IPv6 Addressing.

IPv6 Global Unicast Address
Prefix Range Designation and explanation
2000::/3 2000::/64 - 3FFF:FFFF:FFFF:FFFF/64 They are globally routable and reachable IPv6 addresses in the Internet. They are equivalent to public IPv4 addresses ant the operators of networks using these addresses can be found using the Whois servers of the RIRs listed in the registry at: https://www.iana.org/assignments/ipv6-unicast-address-assignments/ipv6-unicast-address-assignments.xhtml

Step 1: noip.com configuration

First, access the website by entering www.noip.com/login in your internet web browser's URL bar.

Login screen


Login into noip.com system using your credentials. If you don't have a registered account, then you need to create one. You can do that by clicking Register.

Create host


After successfully logging into your account, in the control panel dashboard go to the "quick add" section and select More Records

A new window will prompt in your web browser; fill out the information according to your hostname and domain of preference, select the AAAA record, enter the default address for each Internet protocol accordingly and click on create hostname.

List of hosts


You can preview the list of hosts you have created by clicking the button Active