Difference between revisions of "(U)SIM Related Commands TRM250"
From Teltonika Networks Wiki
m (Protected "(U)SIM Related Commands TRM250" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite))) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
== (U)SIMRelated Commands == | == (U)SIMRelated Commands == | ||
| − | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=65&zoom=100,68,232 AT+CIMI Request International Mobile Subscriber Identity (IMSI)]=== | |
| − | [https://wiki.teltonika-networks.com | + | ---- |
| − | |||
The command requests the International Mobile Subscriber Identity (IMSI) which is intended to permit the TE to identify the individual SIM card or active application in the UICC(GSM or USIM) that is attached to MT. | The command requests the International Mobile Subscriber Identity (IMSI) which is intended to permit the TE to identify the individual SIM card or active application in the UICC(GSM or USIM) that is attached to MT. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=66&zoom=100,68,97 AT+CLCK Facility Lock]=== |
| − | + | ---- | |
| − | The command is used to lock, unlock or interrogate a MT or a network facility <fac>. | + | The command is used to lock, unlock or interrogate a MT or a network facility '''<fac>'''. It can be aborted when network facilities are being set or interrogated. The factory default password of PF,PN,PU,PP and PC lock is “12341234” |
| − | |||
| − | |||
| + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=68&zoom=100,68,138 AT+CPIN Enter PIN]=== | ||
| + | ---- | ||
The command is used to enter a password or query whether or not the module requires a password which is necessary before it can be operated. The password may be (U)SIM PIN, (U)SIM PUK, PH-SIM PIN, etc. | The command is used to enter a password or query whether or not the module requires a password which is necessary before it can be operated. The password may be (U)SIM PIN, (U)SIM PUK, PH-SIM PIN, etc. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=70&zoom=100,68,158 AT+CPWD Change Password]=== |
| + | ---- | ||
| + | The command sets a new password for the facility lock function defined by '''AT+CLCK'''. | ||
| − | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=71&zoom=100,68,556 AT+CRSM Restricted (U)SIMAccess]=== | |
| − | + | ---- | |
| − | [https://wiki.teltonika-networks.com | + | The command offers easy and limited access to the (U)SIM database. It transmits the (U)SIM command number '''<command>''' and its required parameters to the MT. |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | The command offers easy and limited access to the (U)SIM database. It transmits the (U)SIM command number <command> and its required parameters to the MT. | ||
| − | |||
| − | |||
| + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=72&zoom=100,68,776 AT+QCCID Show ICCID]=== | ||
| + | ---- | ||
The command returns the ICCID (Integrated Circuit Card Identifier) number of the (U)SIM card. | The command returns the ICCID (Integrated Circuit Card Identifier) number of the (U)SIM card. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=73&zoom=100,68,401 AT+QPINC Display PIN Remainder Counter]=== |
| − | + | ---- | |
The command can query the number of attempts left to enter the password of (U)SIM PIN/PUK. | The command can query the number of attempts left to enter the password of (U)SIM PIN/PUK. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=74&zoom=100,68,242 AT+QINISTAT Query Initialization Status of (U)SIM Card]=== |
| − | + | ---- | |
The command is used to query the initialization status of (U)SIMcard. | The command is used to query the initialization status of (U)SIMcard. | ||
| − | [https://wiki.teltonika-networks.com | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=74&zoom=100,68,793 AT+QSIMDET (U)SIM Card Detection]=== |
| − | + | ---- | |
| − | The command enables (U)SIM card hot-swap function. (U)SIM card is detected by GPIO interrupt. The level of (U)SIM card detection pin should also be set when the (U)SIM card is inserted. | + | The command enables (U)SIM card hot-swap function. (U)SIM card is detected by GPIO interrupt. The level of (U)SIM card detection pin should also be set when the (U)SIM card is inserted. This command can be saved by '''AT&W.''' |
| − | |||
| − | |||
| − | The command queries(U)SIM card insertion status or determines whether (U)SIM card insertion status report is enabled. The configuration of this command can be saved by AT&W. | + | ===[https://wiki.teltonika-networks.com/images/4/48/Quectel_BG96_AT_Commands_Manual_V2.3.pdf#page=76&zoom=100,68,97 AT+QSIMSTAT (U)SIM Card Insertion Status Report]=== |
| + | ---- | ||
| + | The command queries (U)SIM card insertion status or determines whether (U)SIM card insertion status report is enabled. The configuration of this command can be saved by '''AT&W'''. | ||
[[Category:TRM250 AT Commands]] | [[Category:TRM250 AT Commands]] | ||
Latest revision as of 10:21, 13 March 2023
Main Page > TRM Modems > TRM250 > TRM250 Manual > TRM250 AT Commands > (U)SIM Related Commands TRM250(U)SIMRelated Commands
AT+CIMI Request International Mobile Subscriber Identity (IMSI)
The command requests the International Mobile Subscriber Identity (IMSI) which is intended to permit the TE to identify the individual SIM card or active application in the UICC(GSM or USIM) that is attached to MT.
AT+CLCK Facility Lock
The command is used to lock, unlock or interrogate a MT or a network facility <fac>. It can be aborted when network facilities are being set or interrogated. The factory default password of PF,PN,PU,PP and PC lock is “12341234”
AT+CPIN Enter PIN
The command is used to enter a password or query whether or not the module requires a password which is necessary before it can be operated. The password may be (U)SIM PIN, (U)SIM PUK, PH-SIM PIN, etc.
AT+CPWD Change Password
The command sets a new password for the facility lock function defined by AT+CLCK.
AT+CRSM Restricted (U)SIMAccess
The command offers easy and limited access to the (U)SIM database. It transmits the (U)SIM command number <command> and its required parameters to the MT.
AT+QCCID Show ICCID
The command returns the ICCID (Integrated Circuit Card Identifier) number of the (U)SIM card.
AT+QPINC Display PIN Remainder Counter
The command can query the number of attempts left to enter the password of (U)SIM PIN/PUK.
AT+QINISTAT Query Initialization Status of (U)SIM Card
The command is used to query the initialization status of (U)SIMcard.
AT+QSIMDET (U)SIM Card Detection
The command enables (U)SIM card hot-swap function. (U)SIM card is detected by GPIO interrupt. The level of (U)SIM card detection pin should also be set when the (U)SIM card is inserted. This command can be saved by AT&W.
AT+QSIMSTAT (U)SIM Card Insertion Status Report
The command queries (U)SIM card insertion status or determines whether (U)SIM card insertion status report is enabled. The configuration of this command can be saved by AT&W.
