78
edits
Changes
no edit summary
On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests.
On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests.
[[File:Networking rutx example DNP3 tcp masterconfig v1.png|border|class=tlt-border]]
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
===Requests Configuration===
===Requests Configuration===
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
[[File:Requests config.png|border|class=tlt-border]]
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
Refer to [[RUTX11 DNP3#DNP3 Parameters|DNP3 Parameters]] and set the serial parameter.
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’
[[File:Networking rutx example DNP3 parameter settings v1.png|border|class=tlt-border|alt=|832x832px]]
[[File:Networking rutx example DNP3 Instance settings v1.png|border|class=tlt-border]]
TCP MASTER should look like this.
TCP MASTER should look like this.
