23
edits
Changes
mLine 1:
Line 1: − + − − + − '''Installing DNP3 Package'''+ Line 12:
Line 11: − + − + − '''TCP MASTER'''+ − − − + − + − '''TCP MASTER CONFIGURATION''' − + − + − '''Requests Configuration''' − + − Line 48:
Line 42: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Žilvinas moved page Draft:DNP3 TCP Master to DNP3 TCP Master
Summary
==Summary==
'''Distributed Network Protocol 3 (DNP3)''' is a set of communications protocols used between components in process automation systems. It is primarily used for communications between a “master station” and Remote Terminal Units (RTUs) or Intelligent Electronic Devices (IEDs).
'''Distributed Network Protocol 3 (DNP3)''' is a set of communications protocols used between components in process automation systems. It is primarily used for communications between a “master station” and Remote Terminal Units (RTUs) or Intelligent Electronic Devices (IEDs).
This example provides an Step by Step instructions on how to configuration DNP3 functionality in RUTX11 device.
This example provides an Step by Step instructions on how to configure DNP3 functionality in RUTX11 device. In this RutX11 is configured as the TCP Master and DNP3 outstation to send data to a remote HTTPS server.
==INSTALLING DNP3 PACKAGE==
DNP3 can be installed using the package manager
DNP3 can be installed using the package manager
[[File:Networking rutx11 example DNP3 installing dnp3 package v1.png|border| class=tlt-border]]
[[File:Networking rutx11 example DNP3 installing dnp3 package v1.png|border| class=tlt-border]]
After that navigate to Services>DNP3
After that navigate to Services→DNP3
[[File:Networking rutx11 example DNP3 service features v1.png|border|class=tlt-border]]
[[File:Networking rutx11 example DNP3 service features v1.png|border|class=tlt-border]]
DNP3 Protocol contains two features. ‘TCP MASTER’ and ‘DNP3 OUTSTATION’.
DNP3 Protocol contains two features. TCP MASTER and DNP3 OUTSTATION.
==DNP3 TCP MASTER==
TCP Master requests specific information from DNP3 outstation through the communication channel.
TCP Master requests specific information from DNP3 outstation through the communication channel.
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
To setup TCP MASTER click on the TCP Master Button and click ‘ADD’ to add a new master.
[[File:Networking rutx11 example DNP3 TCP master overview v1.png|border|class=tlt-border]]
[[File:Network rutx example DNP3 TCP master overview.png|border|class=tlt-border|alt=|900x900px]]
===TCP Configuration===
On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests.
On this section we configure the parameters of the DNP3 Outstation that the Master will be querying with requests.
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border]]
[[File:Networking rutx11 example DNP3 tcp master configuration v1.png|border|class=tlt-border|alt=|924x924px]]
===Requests Configuration===
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
To obtain data from DNP3 Outstation configure a DNP3 instance. The DNP3 Master will send a request to DNP3 outstation specifying the function codes to be sent. The outstation then sends the requested data back to the DNP3 Master.
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
On the ‘ADD NEW INSTANCE SECTION’ type the name of the instance. In this example we want to read the serial number, so we type ‘serial’.
[[File:Requests config.png|border|class=tlt-border|alt=|900x900px]]
[[File:Networking rutx11 example DNP3 requests configuration v1.png|border|class=tlt-border]]
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’
The serial parameter is '5' with the group type 'octet string' and then ‘SAVE & APPLY’
[[File:Networking rutx example DNP3 Instance settings v1.png|border|class=tlt-border|alt=|900x900px]]
TCP MASTER should look like this.
[[File:Networking rux11 example DNP3 tcp master configurdv1.png|border|class=tlt-border]]
DNP3 OUTSTATION
A DNP3 Outstation component communicates with a single master via a communication channel.
To configure the DNP3 Outstation Go to Services→ DNP3→ DNP3 OUTSTATION
===DNP3 Outstation Configuration===
[[File:Networks rutx example DNP3 outstation config v1.png|border|class=tlt-border|alt=|900x900px]]
'''NOTE: Th'''e Local Address and the Remote Address configuration in TCP Master and DNP3 Outstation are configured in reverse such that the Local address in TCP Master is the Remote address in the DNP3 Outstation and vice versa.
==TESTING DNP3==
To test DNP3 protocol set up an account with the [https://beeceptor.com/ beeceptor] and create an endpoint.
[[File:Networking rutx11 example DNP3 endpoint creating beeceptor v1.png|border|class=tlt-border]]
Create the DNP3 Testing endpoint and copy the generated endpoint link as shown below.
[[File:Networking rutx11 example DNP3 dnp3testing endpoint v1.png|border|class=tlt-border]]
===Data to Server===
Navigate to Services → Data to Server and set up the server.
Set the JSON according to the kind of data you want to include. For this example, we will use.
{"Date": "%d", "Remote IP": %r, "Data": %o}
[[File:Networks rutx example DNP3 data to server v1.png|border|class=tlt-border|alt=|925x925px]]
Proceed to [https://beeceptor.com/ beeceptor] to check the results
[[File:Networking rutx11 example DNP3 dnp3testing beeceptor post v1.png|border|class=tlt-border]]
Click on POST to check the results. You should see results like this.
[[File:Networking rutx11 example DNP3 dnp3testing results v1.png|border|class=tlt-border]]
Category: [[RUTX11 Configuration Examples]]
