479
edits
Changes
Mobile Bridge mode troubleshooting (view source)
Revision as of 16:24, 16 June 2020
, 16:24, 16 June 2020→Step by step
* Make sure that WAN Failover is turned off and mobile is set as main WAN in the '''Network → WAN''' page.
* Make sure that WAN Failover is turned off and mobile is set as main WAN in the '''Network → WAN''' page.
* Make sure that DHCP server is enabled on menu ''Network → LAN''. When RUT is in '''Bridge mode''' there are no settings tab for DHCP server on Web UI. You will be unable to manage it. If DHCP server is disabled on RUT, PC will not get IP address from ISP. You should set Static WAN IP address settings on PC to get internet connectivity or LAN IP address to access RUT Web UI.
* Make sure that DHCP server is enabled on menu '''Network → LAN'''. When RUT is in '''Bridge mode''' there are no settings tab for DHCP server on Web UI. You will be unable to manage it. If DHCP server is disabled on RUT, PC will not get IP address from ISP. You should set Static WAN IP address settings on PC to get internet connectivity or LAN IP address to access RUT Web UI.
* Then in the ''Network → WAN → Mobile Configuration'' page select Mode: '''Bridge''' in the mobile configuration section. You will then see an additional configuration field for entering a MAC address appear. Enter your PC network interface MAC address, use colons to separate digit groups.
* Then in the ''Network → WAN → Mobile Configuration'' page select Mode: '''Bridge''' in the mobile configuration section. You will then see an additional configuration field for entering a MAC address appear. Enter your PC network interface MAC address, use colons to separate digit groups.
